solaredge Manuals / Datasheets / Instructions

solaredge Residential Power Optimizer Installation Guide

Discover how to install and connect the Residential Power Optimizer S1000-1GMXMBT by SolarEdge with ease. Follow step-by-step instructions on mounting, attaching connectors, and verifying connections for optimal performance. Learn about double insulation and cable management to ensure efficient power optimization.

solaredge S650A Power Optimizer Owner’s Manual

solaredge S650A Power Optimizer - Featured image

Discover the efficiency and flexibility of the S650A Power Optimizer for residential solar installations. With a superior efficiency of 99.5% and advanced safety features, it maximizes space utilization while mitigating module mismatch losses. Ensure compatibility with SolarEdge inverters and adhere to installation specifications for optimal performance.

solaredge S1000 Power Optimizer For Europe Instructions

Learn about the specifications, installation instructions, and maintenance tips for the S1000 Power Optimizer for Europe. Find out about its efficiency, warranty, and compatibility with SolarEdge inverters. Understand the features of this product to optimize your PV system effectively.

solaredge S-Series Residential Power Optimizer Instructions

SolarEdge residential Power Optimizer inter-compatibility - Technical note Revision history Version 1.9, November 2024 – Added R-Series Power Optimizers Version 1.8, September 2024 – Updated general compatibility guidelines Version 1.7, August 2024 – Updated general compatibility guidelines This technical note specifies the inter-compatibility between: S-Series Power Optimizers and P-Series SolarEdge Residential Power Optimizers. P-Series Power Optimizers with previous PBxxx and OPxxx series of Power Optimizers. For inter-compatibility of Commercial Power Optimizers refer to https://knowledge-center.solaredge.com/sites/kc/files/se-power-optimizer-commercial-intercompatibility-technical-note.pdf NOTES A single PV string refers to Power Optimizers that are connected using their output cables to form a string. In new installations, do NOT mix S-series and P-series Power Optimizers in the same string. When adding a new Power Optimizer use SolarEdge Designer to verify that the specifications of the PV module such as the power, ISC and Voc (at minimum ambient temperature) are compatible with the replacement Power Optimizer. Refer to the Power Optimizer datasheet for details. Guidelines for retrofitting Adding a new parallel string When retrofitting additional strings, it is not necessary to comply with the inter-compatibility rules. You may include different series and models of Power Optimizers in the same installation if you install them in separate PV strings. String expansion When expanding a string, Power Optimizers can be installed in the same PV string, if it complies with the inter-compatibility rules. NOTE In systems where both P-series and S-series Power Optimizers are connected to the same inverter unit, the Sense Connect feature is enabled only in the S-series connectors. For Sense Connect inverter compatibility table please refer to https://knowledge-center.solaredge.com/sites/kc/files/se-senseconnect-application-note.pdf SolarEdge residential Power Optimizer inter-compatibility Guidelines for Power Optimizer RMA When connecting different Power Optimizer models in the same PV string for RMA or retrofit purposes, they must be inter-compatible with each other as specified in Tables 1, 2 and 3. Smart PV module compatibility SolarEdge Smart Modules RMA SolarEdge Smart PV Modules all have compatible, built-in Power Optimizers (P370 or S440). These Power Optimizers are compatible and thus ensure that all SolarEdge Smart Modules are inter-compatible. P-Series, R-Series and S-Series compatibility In existing installations, installing P-Series, R-Series and S-Series Power Optimizers in the same PV string is only possible based on their inter-compatibility as specified in Table 1. When replacing P-Series Power Optimizers with S-Series or R-Series Power Optimizers, verify that the inverter firmware version is updated as follows: For inverters with LCDs (2.x CPU) the minimum required CPU firmware version is 2.11xx. For inverters with LCDs (3.x CPU) with Tesla battery, the minimum required CPU firmware version is 3.2193 For SetApp enabled inverters the minimum required CPU firmware version is 4.16.xx. The following tables summarize Power Optimizer series and models that may be installed in the same PV string when a Power Optimizer is being replaced. Where a cell contains a check mark, the relevant Power Optimizers may be installed in the same string. S-Series Power Optimizer inter-compatibility table for RMA Existing Power Optimizer to be replaced Replacement/Additional Power Optimizer S440 S500 S500B S650B S650C/U650 S-Series S440 S650C/U6503 S5003 S500B S650B3 Table 1 R-Series Power Optimizer inter-compatibility table for P-Series RMA SolarEdge support centers will continue to support all phased-out P-Series Power Optimizers with compatible R-Series Power Optimizers. In case of stock shortages, replacement will be supported with S-Series Power Optimizers. Existing Power Optimizer to be replaced Replacement/Additional Power Optimizer R500 R600 S440 S500 S500B S650B P-Series P3xx/P401 P350I/P370I/P401I1 P4002 P5002 P404/P405/P485/P505 P601 ³ Table 2 Compatible only when connected to a SolarEdge inverter. Otherwise, must be replaced with one of P3501 or P3701 or P4011. Important: Verify the modules Voc. If Voc is less than 60V, use S440 or S500 according to Table 2. If Voc is greater than 60V, use R600. Make sure that you choose an equivalent or higher power rating Power Optimizer for RMA according to the PV module's power rating. SolarEdge residential Power Optimizer inter-compatibility IMPORTANT NOTES R-Series Power Optimizers cannot be used for new installations or to replace S-Series Power Optimizers for retrofit or RMA purposes. The R600 Power Optimizer is compatible with P400 and P500 Power Optimizers, but not with other 60V output P-Series Power Optimizers. If you have a full string of P400/P500 Power Optimizers, use R600 for RMA. If you have a P400/P500 Power Optimizer in a string of P3xx/P401 Power Optimizers, use R500 for RMA. P-Series Power Optimizer inter-compatibility table for P-Series RMA Support for all phased-out P-Series Power Optimizer models by SolarEdge support centers will continue with a compatible replacement while stocks last, followed by replacement with compatible part numbers from the R-Series. Series Existing Power Optimizer Replacement Power Optimizer M2640 P300/P320/P340/P350/ P370/P375/P3954 P370T P400 P401 P404 P405 P485 P500 P505 P601 P350I/P370 I/P401I4 P-Series P300 P320 P340 P350 P370 P370T P375 P395 P4005 P401 P350I/P370I/P401I 6 6 6 6 P404 P4057 P4857 4 Make sure to choose an equivalent or higher power rating Power Optimizer for RMA 5 Important: Verify the modules Voc. If Voc is less than 60V, use S440 or S500 according to Table 2. If Voc is greater than 60V, use R600. Compatible only when connected to a SolarEdge inverter. Otherwise, must be replaced with one of P3501 or P3701 or P4011. 7 For P405 and P485 the same replacement options apply for both single and dual input versions. Series Existing Power Optimizer Replacement Power Optimizer M2640 P300/P320/P340/P350/ P370/P375/P3954 P370T P400 P401 P404 P405 P485 P500 P505 P601 P350I/P370 I/P401I4 P500 P505 P601 OP-Series OP250-LV OP300-LV OP300-MV OP350-LV OP350-MV OP400-MV OP400-EV OP480 OP500-IV PB-Series PB250-AOB PB350-AOB PB350-TFI PB250-CSI OPJ300-LV M series M2640 Table 3 IMPORTANT NOTE! Using a configuration in contradiction to the compatibility table(s) above may revoke the warranty. SolarEdge residential Power Optimizer inter-compatibility

The S-Series Residential Power Optimizer user manual provides specifications and guidelines for compatibility with P-Series SolarEdge residential Power Optimizers. Learn about inter-compatibility rules, retrofitting guidelines, and Smart PV Module compatibility. Version 1.9, November 2024.

solaredge ENET2 Energy Net Inverter Installation Guide

Learn how to install and connect the ENET2 Energy Net Inverter with these step-by-step instructions. Verify the connection status using SetApp and ensure proper antenna installation for optimal performance. This user manual provides detailed specifications for various ENET2 models, including ENET-HBNP-01, ENET-HBPV3D-01, and ENET-HBPJD-01.

solaredge S440 PV Power Optimizer Owner’s Manual

Learn about the specifications and connections of the S440 PV Power Optimizer in this manual. Discover how to optimize power output in your photovoltaic system and connect multiple optimizers for enhanced performance.

solaredge U650 Residential Power Optimizer Owner’s Manual

The U650 Residential Power Optimizer user manual provides specifications, installation guidelines, system design recommendations, and safety instructions for optimal performance. Compatible with various PV modules, this optimizer ensures efficient power delivery within a safe operating range.

solaredge CSS OD Commercial Storage System Installation Guide

Learn how to operate the CSS OD Commercial Storage System with this user manual. Discover key features like the CSS-OD 102.4 kWh capacity and solaredge technology for efficient energy storage. Get detailed instructions on using this 50 kW Commercial Storage System.

solaredge P850-4RM4MBY Power Optimizers Instructions

Learn how to install and connect P850-4RM4MBY Power Optimizers with SolarEdge monitoring for warranty compliance. Report site IDs for waiver approval within 3 weeks to maintain warranty. Explore specifications and guidelines for optimal performance.

SE.5-17K Pvbox Solaredge Instructions

SE 5 17K Pvbox Solaredge- Featured Image

Discover the comprehensive user manual for SE.5-17K Pvbox SolarEdge and other SolarEdge models, providing detailed specifications, installation instructions, and FAQs. Learn about lightning protection, optional accessories, and the durable polycarbonate housing for enhanced safety and durability.

Search for solaredge Documents by Model Name or Number:

Tag Archives: solaredge