Tag Archives: Push Button LED Dimmer

DigiNet MMDM-PB LEDsmart Push Button LED Dimmer Installation Guide

Learn how to install and program the DigiNet MMDM-PB LEDsmart Push Button LED Dimmer with this comprehensive installation guide. Designed in Australia to meet Australian Standards, this two-wire phase control dimmer is suitable for one-way, two-way, three-way and multi-way dimming with no extra wires needed. Get optimized dimming for your LED based lamps and drivers with this high quality dimmer.

DigiNet MMDM-PB LED Smart Push Button LED Dimmer Installation Guide

Learn how to set up the MMDM-PB LED Smart Push Button LED Dimmer with this installation guide. Follow the easy steps to adjust brightness, kick start feature, off state LED feature, separate switch mode, toggle/memory dimmer, multiMate mode, and factory defaults reset. Enter setup mode in under 15 minutes with a 10-second press and hold, or in over 15 minutes with a 30-second press and hold of the dimmer push button. Get the most out of your Dimmer with the LEDsmart+ push button dimmer.