The X3-SUB Cellular Data Logger user manual provides detailed instructions for setting up and integrating sensors with the X3-SUB logger. The guide includes information on product specifications, connectivity options, data logger setup, sensor integration, and WQData LIVE setup. Before field deployment, it is essential to configure the X3 system and verify sensor readings for optimal performance.
Learn how to set up and use the X2-SDLMC cellular data logger with this quick start guide. The X2-SDLMC features industry standard protocols including SDI-12, RS-232, and RS-485 and is powered by an internal solar rechargeable battery reserve. Access and store data on the WQData LIVE web datacenter. Get started now!
Learn how to set up and operate the X2-SDL Cellular Data Logger with this quick start guide. Ensure correct sensor readings with a test run and configure the device with the CONNECT software. Use unique addresses for SDI-12 and RS-485 sensors. Install D-cell alkaline batteries and wait up to 60 seconds for cellular coverage check. Get started with the X2-SDL today.
Learn how to set up and configure the X2 Radio Cellular Data Logger (model number: X2) with this comprehensive user guide. This logger includes an integrated radio and cellular module, three sensor ports, and connects via WiFi to store data on the WQData LIVE web data center. Follow easy steps for installation and use, with access to a built-in sensor library. Get started today with the X2 Data Logger.
