Surprise T-SL-04 String Lights
USER MANUAL
- Category: String Lights
- Model Number: T-SL-04
- Domination Principle: Ble
- APP: Surprise
- Power Supply: Our Plug Makes Input AC 120V Reduced To DC 30V for Safety
- Supported Driver IC：SM16703P, WS2812E, UC1903B, ASL140140, IC2811F, TM1814, WS2815B,
- WS2812B, SM16703 , SM16704, WS2811, UCS1903, SK6812, INK1003, UCS2904B
- Working Temperature: -20~+55℃
- Dmension:1.2m/3.9ft, 1.8m/5.9ft, 2.3m/7.5ft
Download Surplife APP
Download “Surplife” in the App Store, register, and make sure the Bluetooth of the mobile phone is turned on.
How to Connect to Surplife APP
Register/Login to your Surplife account.
Enter the “Surplife” app, tap “add device” or click “+” to add the device.
Rename the device and select a room for it.
Remote Control
Key Instruction
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Frequently Asked Questions
How to set up your Bluetooth LED string light?
- Enable your Bluetooth on your phone.
- Then power on the LED string light.
- Open “the Surplife” App, the App can directly connect to the device. Lt can automatically match the light without other steps, and you can experience the smart light simply and quickly.
What can I do if connecting the Bluetooth device or adding a new device fails?
Please power off the LED string light, then turn it on again, if the problem can’t be solved, please restart the phone.
Documents / Resources
 |
Surplife T-SL-04 String Lights [pdf] User Manual T-SL-04, T-SL-04 String Lights, String Lights, Lights |
