Sunopy logo

Assembly Instructions for Dropdown screen
270cm for pergola 3m side
370cm for pergola 4m side

Sunopy 270cm Dropdown Screen 0

Spare Parts List
Label No. Description Drawing QTY
L The handle crank Sunopy 270cm Dropdown Screen 1 1
M The bracket  Sunopy 270cm Dropdown Screen 2 3
N The main frame  Sunopy 270cm Dropdown Screen 3 1
O The adjustable holder for wire rope Sunopy 270cm Dropdown Screen 4 2
P The cover for adjustable holder Sunopy 270cm Dropdown Screen 5 2
Q The regulator for wire rope Sunopy 270cm Dropdown Screen 6 2
R The ring  Sunopy 270cm Dropdown Screen 7 1
K1 The cross head screw M4x20+M4 lock nut Sunopy 270cm Dropdown Screen 8 1
K2 The cross head countersunk screw M4x12 Sunopy 270cm Dropdown Screen 9 4
K3 The self-drilling screws (Cross recessed large flat head) ST4.2×25 Sunopy 270cm Dropdown Screen 10 16

Fix the part M with the part K3 onto the beam

Sunopy 270cm Dropdown Screen 11

  1. Use the self-drilling screws K3 to fix it up tightly
  2. LED light slot
  3. Note: Drill holes according to the size shown in the figure. Drill holes near the outside of the beam to avoid drilling through the gutter.

Sunopy 270cm Dropdown Screen 12 Sunopy 270cm Dropdown Screen 13

  1. Gutter

M Sunopy 270cm Dropdown Screen 2  QTY: 3PCS || K3 Sunopy 270cm Dropdown Screen 10 QTY: 12PCS

Sunopy 270cm Dropdown Screen 14

  1. Rotate it
  2. Fit it into the right position
  3. Tighten up the screws

Step 1:
Step 2: Install the loop R and fix screw K1 after screen installed well.

N Sunopy 270cm Dropdown Screen 3 QTY:1PC || K1 Sunopy 270cm Dropdown Screen 8 QTY:1PC
R Sunopy 270cm Dropdown Screen 7 QTY:1PC || L Sunopy 270cm Dropdown Screen 1 QTY:1PC

Sunopy 270cm Dropdown Screen 15

  1. Bar hole
  2. Need 20 mm distance
  3. Tighten up the internal screws of Q

Step 1: Open the tie and take out the wire rope
Step 2: Pass the wire rope through the bar hole
Step 3: Loosen the internal screws of Q Pass the wire rope through the middle hole of Q
Step 4: Take out the nut

Q Sunopy 270cm Dropdown Screen 6 QTY:2PCS N Sunopy 270cm Dropdown Screen 3 QTY:1PCS

Sunopy 270cm Dropdown Screen 16

  1. wire rope

Step 1: Fix the The adjustable holder for wire rope with screws K3.
Step 2: Pass the wire rope through the regulator, bend the wire rope with needle-nose pliers, and then pass the wire rope back to the regulator with the insertion depth 2cm, tighten the hexagon socket set screw with flat end M4x6, then pass the regulator through the adjustable holder, tighten the hexagon nut M8, and tension the wire rope.
Step 3: Assemble the cover to the regulator and fix it with screw M4*12, installation completed.

O Sunopy 270cm Dropdown Screen 4 QTY:2PCS || P Sunopy 270cm Dropdown Screen 5 QTY:2PCS
K3 Sunopy 270cm Dropdown Screen 10 QTY:4PCS || K2 Sunopy 270cm Dropdown Screen 9 QTY:4PCS

Documents / Resources

Sunopy 270cm Dropdown Screen [pdf] Installation Guide
270cm, 370cm, 270cm Dropdown Screen, 270cm, Dropdown Screen, Screen

References

Leave a comment

Your email address will not be published. Required fields are marked *