Power SG-100WM Monocrystalline Module
Instruction Manual
SG-100WM Monocrystalline Module
Monocrystalline Module Models
SG-100WM
Frame thickness: 0. 9±0. 128¥
Treatment for frame: Anodized.
Module Diagram
UL-CHARACTERISTIC CURVE AT 25 C
Electrical Specifications
*STC : Irradiance 1000W/m² , AM1.5 spectrum, module temperature 25℃
| Model type | SG-100WM |
| Peak power (Pmax) | 100W |
| Cell Efficiency | 22.80% |
| Maximum power voltage (Vmp) | 19.1V |
| Maximum power current (Imp) | 5.24A |
| Open circuit voltage (Voc) | 22.1V |
| Short circuit current (Isc) | 5.57A |
| Power Tolerance | ±3% |
| Maximum system voltage | 600V |
| Series fuse rating (A) | 8 |
| Number of bypass diode | 1 |
| Temperature Coefficients | 0.03%/℃ |
| Voltage Temperature Coefficient β(Voc) | – 0.32%/℃ |
| Power Temperature Coefficient | -0.42%/℃ |
| Nominal Temperature Of Cells(NOTC) | 46±2℃ |
| Application Temperature Range | -40~+85℃ |
Mechanical Characteristics
| Dimensions： | 970 x 540 x 30mm (38.19×21.26×1.18 inch) |
| Weight: | 5.88kg (13.05lbs) |
| Solar Cells: | 33cells in series(3x 11) |
| Construction: | High-transmission low-iron tempered glass , EVA, TPE |
| Frame: | Anodized aluminum is mainly for improving corrosion resistance. Color: silver |
Output
| Cable | LAPP(4mm² ) |
| Lengths | 900(＋) and 900(－) |
| Connector | MC IV Plug |
Module Warranty:
25-year limited warranty of 80% power output;
10-year limited warranty of 90% power output;
5-year limited warranty of materials and workmanship.
Note: This publication summarizes product warranty and Specifications which are subject to change without notice Product photos are for reference only, on behalf of actual product.
Documents / Resources
 |
Sun Gold Power SG-100WM Monocrystalline Module [pdf] Instruction Manual SG-100WM Monocrystalline Module, SG-100WM, Monocrystalline Module, Module |