SUBSONIC PS5 Wireless LED Controller Instruction Manual

Working voltage: DC 3.5V-4.2V
Working current: 100mA±10mA
Built-in lithium battery: 600mAh
Input charging voltage: Type-C input 5V
Transmission distance: 10 M
Battery life: approx 10 hours

Charging

Before connecting for the first time, fully charge the controller’s battery.
To charge the battery, connect the controller to a USB port using the supplied USB cable. The LED indicator on the front of the controller will flash slowly in orange while charging and will turn off when the charge is complete.

Press and hold Home button for 10 seconds to turn the controller off.

Connecting the controller to PS5

Turn on the console.
Connect the controller in sleep mode to one of the console’s USB ports using the USB cable provided.
Press the Home button: the controller connects and the LED indicator lights up. The controller is ready for use.

For subsequent connections, simply press the Home button on the controller and it will automatically connect to the console.
You can also wake the console by pressing the Home button after the first pairing.

Connecting the controller to the PC

The controller only works in wired mode on a PC, using the Direct Input protocol.

Switch on your PC.
Connect the switched-off controller to one of the console’s USB ports using the USB cable supplied.
The controller is ready to use. It is recognised as a “DualSense Wireless Controller” in the list of game controllers.
Vibration is not supported on PC.

Programming the RGB LEDs

When the controller is on, the default light mode is monochrome gradient. You can change the light mode:

Fixed colours: press R3 & D-Pad up ↑ to change to switch colour.
Color gradient: press R3 & D-Pad down to change to color gradient mode
To switch the RGB LED off (or back on), press R3 & Share.

Turbo function

IMPORTANT: the turbo function is not available in all games, only some can support it.

You can affect a turbo or auto function to the keys: A/D/X/O/L1/R1/L2/R2.

Turbo: for the first time, press one of the keys listed above, then Turbo. The key has now the turbo function, so everytime you press it, it will repeat quickly.
Automatic: for the second time, press one of the keys listed above, then Turbo. The key has now the auto function, press it once and the action will repeat endlessly.

Clear the turbo function: for the third time, press one of the keys listed above, then Turbo. The key is now reset to original.

eSport M1 & M2 buttons

You can affect to the keys 1/1/+-/-/A/D/X/O/L1/R1/L2/R2/L3/R3 to M1 or M2 buttons. By default, M1 is mapped to O and M2 is mapped to X.

Press and hold the M key, then press Share. The LED indicator will turn red.

Then press the key that you would like to affect and press again M to save the setting.

Example: to map R1 on M1, press and hold M1, then press Share. The LED indicator turns on red. The press R1, then M1 again and M1 is now mapped to R1.

Gaming headset

You can plug a PS5 gaming headset into the audio socket on the controller.
Go to the console settings to adjust the audio options.

Troubleshooting

If you are unable to connect the controller to the console, press the RESET button located in a small hole on the back of the controller with a paper clip. This will reset the controller.
If the controller does not work properly, go to www.subsonic.com to update the controller driver.
The haptics, adaptive triggers, speaker and microphone functions are not supported by the WIRELESS LED CONTROLLER. If you wish to use these functions in a game, use the official PS5 controller.

Precautions for use

Do not use the controller for any purpose other than those described in this document.
To avoid electrical shock, store and use the controller in a dry place, away from moisture and direct sunlight.

Exposure to high temperatures may damage the body or internal electronics of the unit.
Do not disassemble,
Stop using the controller immediately if you experience fatigue, discomfort or pain. If these effects persist, consult your doctor.

Take regular breaks during play.
Do not allow small children to play with the controller. This product is not intended for children under the age of 7.

Contact and support

The Subsonic team is at your disposal for any further information concerning the WIRELESS LED CONTROLLER or other products in our range of peripherals.
contact@subsonic.com

Respect for the environment

To protect the environment, electrical and electronic equipment must not be disposed of with household waste. Please return them to a collection point for recycling.

RADIO EQUIPMENT DIRECTIVE

UE Declaration of conformity to the Radio Equipment Directive Hereby, SUBSONIC S.A.S. declares that the product WIRELESS LED CONTROLLER
Brand: Subsonic
Models: SA5716-1, SA5716-2, SA5716-3
EAN codes: 3701221704261, 3701221704278, 3701221704575 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/UE. For details, please contact SUBSONIC, 314 allée des noisetiers, 69760 LIMONEST, France, or visit:
https://subsonic.com/fr/content/54-compliance

WWW.SUBSONIC.COM
In case of malfunction, update the controller firmware on www.subsonic.com.

CONTACT & SUPPORT

SUBSONIC
314, allée des noisetiers 69760 Limonest – France
contact@subsonic.com
www.subsonic.com

Documents / Resources

SUBSONIC PS5 Wireless LED Controller [pdf] Instruction Manual
PS5 Wireless LED Controller, PS5, Wireless LED Controller, LED Controller, Controller

References

User Manual

Product Overview

Before the first use

Features