STREX USB Microphone
WINDOWS 7/8/10 INSTALLATION FOR USB
Step 1: Plug the USB port of the microphone directly into your laptop or desktop computer
Step 2: Right-click the Audio Manager icon on the lower right of the desktop, then click the recording devices
Step 3: You can see the microphone is set up and is on default, double click on microphone,then you can find Internal microphone properties.
Step 4: Come to the Listen, check to listen to this device, then click the O button (If you need to monitor when recording, click OK to save the settings)
Step 5: Come to the Custom,You can check AGC or not according to your personal preference
Step 6: Come to the Levels, you can adjust the volume according to your personal preference
Step 7: Now,click on Ok to save the settings.
Mac OS FOR USB
Step 1: Click the desktop menu,then click system preferences.
Step 2: Find sound button and click it.
Step 3: Choose input you will find internal Microphone, turn off the input volume.
Step 4: Then choose USB PnP Sound Device, adjust input volume. (General adjustment in the middle).
Step 5: Test the microphone sound: search out the computer comes with the software: Quick Time Player
Step 6: Right click and select “NEW Audio Recording”
Step 7: After selecting the external USB microphone, click the recording button and you can record it.
Introduction
Thank you for purchasing this condenser microphone, please read this user manual carefully
Tips
The product contains a built-in drive, so you can just connect with USB directly without extra drive
Specification
| Polar Pattern | Omni directional |
| Sensitivity | -30dB±3dB |
| Impedance | ≤2.2KΩ |
| Sensitivity Range | within -3dB at 1V |
| Frequency Response | 50Hz-16KHz |
| SNR | >36dB |
| Length | 1.35m |
Documents / Resources
 |
STREX USB Microphone [pdf] Instruction Manual USB Microphone, SP103 |
