StarTech USB3.0 Point To Point Extender User Manual
Important Safety Instructions:
- To prevent electric shock, please ensure that all devices are properly grounded.
- Do not place this device near or over a radiator or heat register, or where it is exposed to direct sunlight.
- Do not place the device on an uneven or unstable surface, the device may fall resulting in a malfunction.
- Do not expose this device to rain or place it near water. Any liquid that goes into the device may cause a failure, fire, or electric shock.
- If a third-party power supply is used, please ensure that the power supply specifications meet the product requirements.
Introduction
This is a USB 3.0 extender, which can realize one-to-one connection through CAT6/6A/7 network cables, with a transmission distance of up to 50m for CAT6 and 90m for CAT6A; It supports 4 channels of USB 3.0 devices input, Compatible with USB 2.0, USB1.1, such as printer, camera, scanner, USB flash drive, keyboard, mouse, touchscreen, etc. Widely used in security monitoring, gaming, industrial control, professional audio-visual, smart medical and other fields.
Features
- The Transmitter supports USB 3.0 Super-Speed, compatible with USB 3.2 Gen1x1, USB 3.1 Gen1.Gen1; The Receiver supports USB 3.0 Super-Speed, USB 2.0 High-Speed, compatible with USB 1.1 Full-Speed.
- Supports four USB 3.0 input and one USB 3.0 outputs.
- Compatible with CAT6/6A/7 network cables, CAT6 transmission distance can reach 50m, and CAT6A transmission distance can reach 90m.
- Supports USB hub connection.
- Support hot-plugging of USB devices and automatically identify USB standards.
- Support PoC, only the Receiver is required to supply power.
- Supports RS-232 and frame synchronization.
- Firmware upgrading via Micro USB port.
- Lightning protection, surge protection, ESD protection.
- Supports stable 24/7 operation.
Package Contents
Wall Mounting
Choose the wall mounting position and attach the mounting ears to the unit according to the diagram.
Panel Description
- Transmitter (Local Side)
- Receiver (Remote Side)
Installation Procedures
One-to-one connection
Connection Instructions
- Separately connect the computer host and the transmitter with USB cable, the receiver connects to USB devices, such as: printer, camera, scanner, USB flash drive, keyboard, mouse, touchscreen, etc.
- One to one connection, connect the transmitter and receiver with CAT6/6A/7 network cable.
- Connects to the power supply, then the product starts to work.
FAQ
Q：USB device is not recognized when connected?
A：1) Check whether USB port of the transmitter is connected to the USB 3.0 interface properly.
2) Power the transmitter or receiver again.
Q：The receiver is unstable when connected to an external hard drive?
A：When connecting high-power USB devices, it is necessary to offer additional power to external devices.
Specification
Disclaimer
The product name and brand name may be registered trademark of related manufactures. ™ and ® may be omitted on the user manual. The pictures in this user manual are just for reference. We reserve the rights to make changes without further notice to a product system described herein to improve reliability, function or design.
Documents / Resources
 |
StarTech USB3.0 Point To Point Extender [pdf] User Manual USB3.0 Point To Point Extender, USB3.0, Point To Point Extender, Point Extender, Extender |