STARCOM SR-X2100CU Hostrong ADB Remote Control
Product Information
The ADB Star TV Remote is designed for use with ADB Settops,providing control over power, volume, and advanced functions.
SPECIFICATION
- Model: ADB Star TV Remote
- Compatible with: ADB Settops
- Functions: Power, Volume Control, Advanced Features
Product Usage Instructions
Code Search Method:
- Press the TV button on the remote; it will blink twice to indicate readiness for TV operation.
- For volume control using the Code Search Method:
- Press and release the TV button.
- Hold down the SETUP button until the TV button blinks twice.
- Enter 9 9 3 on the remote.
- Press and release the TV button, wait for it to blink twice.
- After completing these steps, you can control volume (+/-) and mute functions regardless of the mode you are in (e.g., TV, STB).
The Learning Method:
The Learning Method allows you to transfer information from the factory-issued remote to the ADB remote for power, volume, etc., bypassing the code search method.
If learning fails, the TV button will emit one long blink, indicating the need to repeat the learning process.
FEATURE
ADB (black) Star TV Remote for ADB Settops – Power, Volume & Advanced
Code Search Method
- Start with TV turned on.
- PRESS and release the TV button
- PRESS and HOLD the RCU SETUP until the TV button blinks twice
- Enter in 9 9 1 and the TV button will blink twice
- Aim the remote at the TV and press and release the POWER button
- PRESS and RELEASE the CH+ or CH- until the TV turns off
- PRESS the POWER button to turn the TV on
- PRESS the RCU SETUP button to store the code for the TV.
The TV button will blink twice. The remote is now ready to operate the TV.
Volume (Use with Code Search Method)
- Press and release the TV button
- Press and hold the SETUP button until the TV button blinks TWICE
- Enter in 9 9 3
- ress and release the TV button and wait until it blinks twice
- Once these steps have been completed, you should be able to control the volume +/- and the mute regardless of what “mode” you are in. (i.e. TV, STB)
The Learning Method
Basically, this means that you can transfer the information from the FACTORY ISSUED remote to the ADB remote (power, volume, etc.) It bypasses having to do the code search method.
- Press the RCU SETUP until the last selected mode button blinks twice. (TV, DVD, etc.)
- Enter in 9 7 5
- Press the TV button
- Press the button you wish to program (i.e. POWER) on the ADB remote
- Place the ADB remote and the ORIGINAL remote head-to-head about 2 inches apart.
- Press and HOLD the SAME button (power) on the ORIGINAL remote. The ADB remote TV button will blink rapidly and turn off. Keep holding the button on the ORIGINAL remote until the TV button on the ADB remote blinks twice.
If the learning failed, the TV button will emit on long blink. You will have to repeat step 6.
Frequently Asked Questions (FAQ)
Q: How do I reset the ADB Star TV Remote?
A: To reset the remote, remove the batteries, press all buttons to discharge any remaining power, reinsert the batteries, and reprogram the remote as needed.
Q: Can the ADB Star TV Remote be used with other devices?
A: The ADB Star TV Remote is specifically designed for use with ADB Settops and may not be compatible with other devices.
Documents / Resources
 |
STARCOM SR-X2100CU Hostrong ADB Remote Control [pdf] User Guide SR-X2100CU Hostrong ADB Remote Control, SR-X2100CU, Hostrong ADB Remote Control, ADB Remote Control, Remote Control |