How to setting Printer BSC10 to support 58mm paper size
How to Setting Printer BSC10 to Support 58mm Paper Size
**Please install driver printer before setting
**This manual is using BSC10UD and connecting through USB Port
- Connect USB Cable between printer to Windows PC and turn it on then Windows will get automatic Star BSC10 drive printer [Check in Control Panel]
- Right click at Star BSC10 > Printer Properties
- Select Advance > Printing Defaults…
- Click Advanced…
- Change Paper Size to 58mm X Receipt (33 Columns) then click OK 2 times
- Select Device Setting and change FRICTION to 58mm X Receipt (33 Columns) then click OK
- Right click at Star BSC10 > Printer Properties again
- Select Star / Help and click Open Printer Utility
- Click OK if do not change printer name in this utility
- Click Printer Setting and program will download current setting
- Change Paper Size to 58mm x Receipt (33 Columns)
- Click Store to save setting
- Click Print Settings to print self-test
Documents / Resources
 |
STAR MICRONICS How to Setting Printer BSC10 to Support 58mm Paper Size [pdf] Instructions BSC10UD, How to Setting Printer BSC10 to Support 58mm Paper Size, How to Setting Printer BSC10 |
