QM-PR1 is a dedicated data receiver for QM-SS1 (mocopi) using
Bluetooth technology. It allows connection to a PC and pairing with
a mocopi on the PC application to receive sensor data.

FCC Statement

This device complies with Part 15 of the FCC rules. It must not
cause harmful interference and must accept any received
interference. Any unauthorized changes could void the user’s
authority to operate the equipment.

Contact Information

For questions or service center locations, contact Sony at
1-800-222-7669 (SONY).

Other Information

The operating voltage details are located on the bottom exterior
of the device. Users should refer to the nameplate for this
information.

Trademarks

Product and company names mentioned may be trademarks of their
respective owners. Trademarks are not explicitly noted with symbols
in the text.

Product Usage Instructions

Connecting QM-PR1 to PC

Place the QM-PR1 within Bluetooth range of the PC.
Turn on the QM-PR1 by pressing the power button.

On the PC, enable Bluetooth and search for available
devices.
Select QM-PR1 from the list of available devices and pair it
with the PC.

Pairing with mocopi

Open the mocopi application on your PC.
Ensure the mocopi device is turned on and within range of the
QM-PR1.

In the application, locate the option to pair a new
device.
Select QM-PR1 from the list of available devices to establish a
connection.

Receiving Sensor Data

Once paired successfully, sensor data will be transmitted from
the mocopi device to the QM-PR1 and displayed on the PC application
in real-time.

Safety Guidelines

Ensure that the QM-PR1 is operated with the radiator at least
20cm away from a person’s body to comply with FCC radiation
exposure limits.

Frequently Asked Questions (FAQ)

Q: Where can I find the model and serial numbers of my
QM-PR1?

A: The model and serial numbers are located on the Sensor data
receiver itself. Check the bottom or back exterior for this
information.

Q: How do I contact Sony Customer Support?

A: For queries or support, you can contact Sony at
1-800-222-7669 (SONY).

“`

View Fullscreen

Sensor data receiver for mocopi
QM-PR1
Reference Guide
Product Overview
QM-PR1 is a dedicated data receiver for QM-SS1 (mocopi) using Bluetooth technology. It is possible to connect the QM-PR1 to a PC and pair it with a mocopi on the PC application to receive sensor data.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment must be installed and operated keeping the radiator at least 20cm or more away from person’s body.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
For question regarding your product or for the Sony Service Center nearest you, call 1-800-222-7669 (SONY). Supplier’s Declaration of Conformity Trade Name : SONY Model : QM-PR1 Responsible Party : Sony Electronics Inc. Address : 16535 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone Number : 858-942-2230

For customers in the United States Owner’s record The model and serial numbers is located on the Sensor data receiver. Record the serial number in the space provided below. Refer to them whenever you call upon Sony Customer Support regarding this product.
Model No.____________________ Serial No._____________________
Other Information
The nameplate indicating operating voltage, etc. is located on the bottom exterior.
In this manual, descriptions of services or applications offered by third parties may be included. You may need separate registrations to the provider or license agreement to use the above-mentioned services or applications. For the applications you accessed through third party websites, confirm the terms of use of the applicable website and the applied privacy policy beforehand. Sony does not guarantee third party websites and their services, availability of applications, or performance.
Trademarks
Product and company names mentioned herein may be the trademarks of their respective owners. In the main text, and R marks are not noted.

Documents / Resources

SONY QM-PR1 Sensor Data Receiver [pdf] User Guide
QM-PR1, AK8QM-PR1, AK8QMPR1, QM-PR1 Sensor Data Receiver, QM-PR1, Sensor Data Receiver, Data Receiver, Receiver

References

User Manual

SONY QM-PR1 Sensor Data Receiver User Guide

QM-PR1 Sensor Data Receiver

Product Information

Specifications

Product Overview