SMARTPEAK QR70 Android POS Display
Specifications
- Product: QR70 Display
- Version: V1.1
- Interface: Button interface
- Indicator Type: Order indicator, Charging indicator, Low battery indicator, Network LEDs
Please read this manual before installation.
Product overview
Product button interface description
Function operation instructions
Description of key functions
| Key description | Function description | |
| Volume“+” | Short press | Press it to increase the volume |
| Long press | Play lastest transaction audio | |
| Volume“-” | Short press | Press it to decrease the volume |
| Long press | Switch between Mobile data and Wi-FI network connection | |
|
Menu key |
Short press | Play battery value and network status |
| Long press | Long Press and hold 3sec to enter Wi-Fi connection settings * | |
| Power key | Long press | Press and hold 3sec to Power on/off device |
Description of the indicator
Network Settings *
Long press “Volume-” key to switch between Mobile Data or Wi-Fi connection (optional).
Steps for wifi mode configuration
Steps
- Long-press press “Volume-” key to switch work on Wi-Fi connection when listening to an audio of “Wi-Fi connection model”.
- Long press “Menu” key to enter AP connection setup mode when listening to the audio of “AP connection setting”.
- Use a smart mobile phone, open the Wi-Fi, and connect to QR70_SN xxxxxx. xxxxxx is the last 6 bits of the DSN code devices.)
- Mobile phone scan the QR code(Figure 1) or input: http://192.168.1.1:80/ on browser to open setting surface.
- Input Wi-Fi connection name, and password and confirm it(Figure 2). if connection success, it will get below Figure 3).
Precautions and after-sales service
Use Notes
The operating environment
- Please do not use this device in thunderstorm weather, because thunderstorm weather may result in the equipment failure, or click the danger.
- Please put the equipment from rain, moisture, and liquids containing acidic substances, or it will cause the electronic circuit boards to corrode.
- Don’t store the device in overheating, high temperatures,or it will shorten the life of the electronic devices.
- Don’t store the device in a too cold place, because when the device’s temperature rises, moisture can form inside, and it might damage the circuit board.
- Do not attempt to disassemble the device; non-professional personnel handling can damage it.
- Do not throw, beat, or intense crash the device, because rough treatment will destroy the device’s parts, and it may cause the device failure. Children’s health
- Please put the device, its components, and accessories in the place where children can’t touch.
- This device is not toys, so children should be under adult supervision to use it.
The charger safety
- The rated charge voltage and current of QR70 are DC 5V/1A. Please select the power adapter of appropriate specifications when charging the product.
- To buy a power adapter, choose an adapter that is BIS certified and meets the device specifications.
- When charging the device, power sockets should be installed near the device and should be easy to hit.And the areas must be far away from the debris, flammable or chemicals.
- Please do not fall or crash the charger. When the charger shell. damaged, please ask the vendor for replacement.
- If the charger or the power cord is damaged, please do not continue to use, so as to avoid electric shock or fire.
- Please do not fall or crash the charger. When the charger shell is damaged, please ask the vendor for a replacement.
- Please do not use wet hand to touch the power cord, or with power supply cable way out the charger.
Maintenance
- Don’t use strong chemicals or powerful detergents to clean the device. If it is dirty, please use a soft cloth to clean the surface with a very dilute solution of glass cleaner.
- Damage caused by water, unauthorized dismantling of the device or external forces will cause the equipment not to be repaired.
E-waste Disposal Declaration
E-Waste refers to discarded electronics and electronic equipment (WEEE). Ensure that an authorized agency repairs devices when needed. Do not dismantle the device on your own. Always discard used electronic products, batteries, and accessories at the end of their life cycle; use anauthorized collection point or collection center. Do not dispose of e-waste in garbage bins. Do not dispose of batteries into household waste. Some waste contains hazardous chemicals if not disposed of properly. Improper disposal of waste may prevent natural resources from being reused, as well as release toxins and greenhouse gases into the environment. Technical support is provided by the Company’s regional Partners.
FAQ
Q: How do I know if the battery is low?
A: When the battery level is less than 10%, the red light will flash, and every 3 minutes, it will announce “Low battery, please charge.”
Documents / Resources
 |
SMARTPEAK QR70 Android POS Display [pdf] User Manual QR70, QR70 Android POS Display, QR70, Android POS Display, POS Display, Display |