Board 6000 Smart Class Rooms Display 
Turn on the display
Press the Standby button on the front control panel. OR If the Wake to Touch option is enabled, the display turns on when you touch the screen.
- Standby
- Input Select
- Mute
- Decrease
- Increase
- Move Up (menu)*
- Move Down (menu)*
- Menu*
*SPNL-6000-V3 only
Show the connected computer’s desktop
After connecting a computer, press the Input Select button on the front control panel until HDMI1, HDMI2 or DisplayPort is selected.
NOTE: Be sure to enable touch control of your computer by connecting a USB cable between the USB port in the display’s side connection panel and a USB connector on your computer.
Use the iQ features
The display includes iQ features that you can use without connecting a computer. To access these features, tap the Home button at the bottom of the screen. OR Press the Input Select button on the front control panel until OPS is selected.
NOTE: The option you select to use the board’s iQ features varies with the model. Select iQ or the option that includes OPS (OPS, OPS display port, or OPS HDMI).
You can then use all the iQ features described in the SMART Board display teacher guide (smarttech.com/displayteacherguide).
© 2020 SMART Technologies ULC. All rights reserved. SMART Board, smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of SMART Technologies ULC in the U.S. and/or other countries. All third-party product and company names may be trademarks of their respective owners. Contents are subject to change without notice. December 11, 2020. smarttech.com/kb/171536
Documents / Resources
 |
SMART Board 6000 Smart Class Rooms Display [pdf] User Manual Board 6000 Smart Class Rooms Display |
