How To Set Up PhotoShare Frames

How To: Assemble The PhotoShare Frame Stand?

Please see the 4 easy steps below to assemble and use the frame stand or watch this quick video

How To: Set Up a PhotoShare Frame

Congratulations! You are about to experience a fun and unique way to enjoy your favorite memories! Don’t worry – it’s also quick and easy.

Please follow the below instructions:

1. Turn on your PhotoShare Frame
2. Connect your PhotoShare Frame to WiFi
3. Install the free PhotoShare Frame App on your device by visiting the iTunes App Store or Google Play store:
   
4. Create your PhotoShare Frame Account
   1. You will be asked to enter your name and email address. Once entered please Tap “Register.” You will then be asked to login with your email and password.
5. Return to the Frame and Tap “Next”  You will then see the Frame ID. Please enter this Frame ID as prompted in the App.  Lastly you will be asked to Name your PhotoShare Frame.

You are now ready to share photos!  There are multiple ways to share. How to Send Photos & Videos

Detailed steps of the above instructions can also be found here or watch the video below.

How To: Change the PhotoShare Frame’s Look

1. Flip your frame around so you are looking at the back
2. Locate the 4 large screws near the corners of the electronic panel (on Brookstone Frames, there will be foam circles covering the screws that should be removed first)
3. Using a coin (or some other thin and solid device) turn the screws counter clockwise to loosen
4. Once you have removed all 4 screws, you can remove the electronic panel from the wood frame
5. Now you can change the matte if you like – just note that there is a small hole in both mattes that needs to align with the light sensor on your electronic panel in order for the auto-dim feature to work correctly
6. Align the matte on the electronic panel & place the wood frame on the front
7. Tighten the 4 screws back in place to hold it all together

References

• User Manual