RJ45 Z-PLUG Field Terminated
Plug Instructions
RJ45 Z-PLUG Field Terminated Plug
*Note for OSP Category 6A shielded cable:
Please refer to the supplemental cable preparation instructions available at: www.siemon.com/us/download/installation.aspx and click on WORK AREA.
To assist safe installations, comply with the following:
A. Use caution when installing or modifying telecommunications circuits.
B. Never touch uninsulated wire terminals unless the circuit has been disconnected.
C. Never install this device in a wet location.
D. Never install wiring during a lightning storm.
To ensure you have the latest
revision to this document, please visit:
www.siemon.com
Documents / Resources
 |
SIEMON RJ45 Z-PLUG Field Terminated Plug [pdf] Instructions RJ45 Z-PLUG Field Terminated Plug, RJ45 Z-PLUG, Field Terminated Plug, Terminated Plug, Plug |
