HT-KB333 Transparent Wireless Keyboard
Instruction Manual

Product parameter

Product Name: Transparent NV iceless keyboard
Bluetooth version: 3.0
Operating frequency :2.402GFtz-2.480GHz
Modulation system :GFSK
Working distance: within 10 meters
Operating voltage :3.1-4.2V
Working current: 3mA
Standby time :252 days /365 days
Charging tine :2-3 hours
Battery capacity 500mAhf baddish
Compatible system :Windows, 10S, Android, etc

Keyboard indicator

Bluetooth Indicator: Blue
Conned the Bluetooth keyboard to the tablet computer. When the keyboard is paired, the indicator will blink continuously (1805). When the Bluetooth keyboard is successfully connected to the tablet brain, the Bluetooth Indicator call automatically turn off. Indicator when switching system mode Flash three times.
A CAP indicator: Blue
Enter the upper and lower case light for the keyboard. When the tablet is successfully connected, press the Caps lock key on the keyboard, and the CAPS indicator wit light up and the entered letter wil be uppercase. Press the Caps lock key again and the CAPS indicator will turn off and the entered letter will be lowercase.
Power indicator. Blue It will turn off automatically after 3 seconds of power-on. When the voltage is lower than 3.3V, the Bluetooth keyboard Power Indicator blinks every 2 seconds, indicating that the battery is too low and needs to be charged.
Charge indicator light Red
The charging status Is displayed in red. II will turn off automatically when it is fully charged

Connection procedure

1. Ensure that the power switch ON the keyboard slides to the On position. The status indicator will be on for 3 seconds and then off.
2. Press the pairing key FN+C, and the Bluetooth indicator will blink
3. Turn on and unlock the iPad and tap the Settings Icon
4. In the Settings menu, dick the “Bluetooth` menu and loom on the Bluetooth switch. The iPad will automatically search for Bluetooth keyboard devices
5. Find the Bluetooth Keyboard device “Bluetooth Keyboard” and dick It. The Bluetooth keyboard will start Dynamic connection
6. After the Bluetooth connection is successful, the pairing indicator will be off and the device “Connected” will be displayed in the list of Bluetooth devices.

Multimedia function key

	Retune to main page		Previous song		Brightness +
	search		Play/pause		Lock screen
	select all		Next song		Touch pad on/off
	copy		Volume-		On-screen keyboard
	paste		Volume +		language switching
	shear		Brightness-		FN composite function

 

   

FN+O= Disconnect Bluetooth connection or pairing mode FN+Q—->Android system;
FN+Command= The touch function is disabled or enabled FN+W——> Win system;
EN-I-Control= On-screen keyboard FN+E–>i0S system;
FN+space= Language switching

Backlight

Backlight switch: Backlight key 3

1. press to turn on the backlight, and press again to manually switch the backlight color “why twible/green/purple/green/yellow/red/white”;
2. press again, automatic backlight, every 5 seconds seven color backlight automatic switch: “white/blue/green/purple/green/yellow/red/white”
3. press again to turn off the backlight.

Note: No keyboard operation for 60 seconds, the backlight is off, press the button again to wake up the backlight; Keyboard back connected, memory recently backlit color; Windows, the desktop is displayed Manual mode: that is, 1 gear, adjust the brightness of the backlight, bulb key press. then press the up key brightness; Bulb key hold down and press down the key brightness reduction;

Channel switching

FN+1/213 can arbitrarily switch three Bluetooth connection channels. If the Power blue light is steady on for 3 seconds, it can connect three Bluetooth devices simultaneously.
Charge
When the battery power is low, the low power indicator will keep flashing, then you need to charge the keyboard

1. Connect the charging terminal of the USB cable to the charging port on the keyboard.
2. Connect end A of the USB cable to the power adapter or USB port on the computer (power adapters are not included).
3. During the charging process of the keyboard, the charging indicator will be on for a long time and will be automatically extinguished after it is full.

Energy-saving mode

If there is no operation on the keyboard within 10 minutes, it will automatically enter the sleep mode and all the LED will be turned off. When you need to use it, you only need to press any key and wait for about 3 seconds. Then the keyboard will be woken up and automatically connected to the Bluetooth, so that it can work normally
Pay attention

1. When not in use for a long time, we recommend turning off the keyboard to extend the battery life
2. In order to obtain a longer battery life, it is recommended to charge the keyboard only when the power lamp is blinking. It is better to charge the keyboard for no less than 2 hours each time

Touch Pad Gestures on iOS 16

Slide finger	Move cursor	Single finger tapping	Left mouse button
Single finger quick double Click not loose drag	left-dick Target drag	Select double finger lap	Right mouse button
Double linger vertical / Horizontal movement	The roller is vertical / Horizontal roll r-f	Four-finger tapping	screenshot
Three-finger simultaneity Upward movement	Recent mission Window switching	Tlitec-finget simultaneity Move doyen	Display application thumbnail
Three-linger simultaneity Swipe left/right	Switching application

iOS 16 mouse function open: “Settings” – “assist” – “touch” – “auxiliary touch” – “open”

FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference , and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Documents / Resources

ShenZhen HT-KB333 Transparent Wireless Keyboard [pdf] Instruction Manual HT-KB333 Transparent Wireless Keyboard, HT-KB333, Transparent Wireless Keyboard, Wireless Keyboard, Keyboard

References

• User Manual