Shenzhen CD-FS-V2 Remote Control User Guide

CD-FS-V2 Remote Control

Product Information

Specifications:

  • Type of Codification: Fixed code (format EV1527)
  • Dimensions: Length 147 mm, Width 42 mm, Height 16 mm
  • Transmission Frequency: Must coincide with reception
  • Customizable control circuit

Product Usage Instructions

Precautions:

1. Use only with the series of products received by the
company.

2. Ensure that the transmission frequency and decoding method
match the reception requirements.

3. The control circuit can be tailored to meet customer
needs.

Caution:

Any changes or modifications not approved by the manufacturer
may void your authority to operate the equipment.

FCC Compliance:

This device complies with part 15 of the FCC Rules. Operation is
subject to the following conditions:

  1. The device must not cause harmful interference.
  2. The device must accept any received interference, even if it
    causes undesired operation.

The equipment should be installed and operated with a minimum
distance of 0cm between the radiator and the body.

Frequently Asked Questions (FAQ)

Q: Can I use this product with other devices?

A: It is recommended to use this product only with the series of
products received from the company to ensure compatibility and
proper functioning.

Q: What should I do if I encounter interference issues?

A: If you experience interference, try adjusting the positioning
of the equipment or contacting customer support for further
assistance.

Q: How can I customize the control circuit?

A: For customization of the control circuit according to your
needs, please reach out to the manufacturer or authorized service
center for guidance and support.

“`

User Guide
Product model: CD-FS-V2 Operating voltage: DC3V (two batteries No. 7) Working current: 12 mA Operating temperature: – 20 – + 65 ° C Modulation mode: ASK Operating frequency: 433.92 MHz, (Special frequency can be customized) Transmission speed: 2Kbit/s Frequency deviation: +- 100 kHz (max) Transmission power: 10 mW
Type of codification: Fixed code (format EV1527) Length, width and height: 147 mm * 42 mm * 16 mm
Precautions Use with the series of products received by the company The transmission frequency and the decoding method on must coincide with the reception
when they are used. The control circuit can be customized according to the customer’s needs.

FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Documents / Resources

Shenzhen CD-FS-V2 Remote Control [pdf] User Guide
2BEHZ-CDT-FS-V2, 2BEHZCDTFSV2, cdt fs v2, CD-FS-V2 Remote Control, CD-FS-V2, Remote Control, Control, Remote

References

Leave a comment

Your email address will not be published. Required fields are marked *