How to Power DOWN a CB-Series Display with OPS PC Installed
Step 1: Select the `Windows’ button at the bottom left-hand corner of your screen
Step 2: Select the power button
Step 3: Select Shutdown and wait for the system to shut itself down
Step 4: When the following image is displayed press the power button located near the lower right- hand corner of the monitor
How to Power UP a CB-Series Display with OPS PC Installed
Step 1: Press the Power button located near the lower right-hand corner of the monitor to Power UP the Display and OPS PC. Once the display turns ON the OPS will begin the boot up process.
Note: You may need to log in with username and password.
Documents / Resources
 |
SHARP How to Power DOWN a CB-Series Display with OPS PC Installed [pdf] Instructions How to Power DOWN a CB-Series Display with OPS PC Installed, How to Power DOWN PC, Power Down CB-Series Display with OPS PC Installed |
