Select 3 Port HDR HDMI Switcher User Manual

Select 3 Port HDR HDMI Switcher User Manual

INTRODUCITON

Picture 1.0 front panel showing

Picture 1.1 rear panel showing

Picture 1.2 IR panel showing

* Please take out the film at the rear of the remote before you use. Please insert the film to remote rear if you do not use the remote for long time.

Connection and operation:

To use HDMI cable to connect the HD source with the HDMI input port of device.
To use HDMI cable to connect the HDMI output port of device with the display.

To use the USB 2.0 TO DC 5.5MM power cable to connect the DC5V Port of the device with USB Power source like TV or USB Power Docking.
Then press again the “Switch” button at device or press the button at remote to
operate the device.

To press the “A” button at remote or press the “Select” button for lasting five seconds, it c an turn on or turn off the auto switch function. When the input channel led light flash for one time, the auto switch is turned on; when the input channel led light flash for three times, the auto switch function is closed.

Spec: