Schreder GL2 Powerful and Efficient LED Solution Installation Guide
Schreder GL2 Powerful and Efficient LED Solution

Contents hide
1 INSTALLATION INSTRUCTIONS
2 A Dimensions and weight
3 B Fixation
4 b. Light beam angle
5 C. QPD CONNECTORS
6 D. CABLE GLANDS
7 Maintenance
8 Mains and Controls combined
9 SAFETY INSTRUCTIONS
10 RISK GROUP
11 ENERGY EFFICIENCY
12 PVC INSULATION AND Y CONNECTION
13 Documents / Resources
13.1 References
14 Related Posts

INSTALLATION INSTRUCTIONS

A Dimensions and weight

Dimensions and weight

Led colour code 740 NW
Light source energy efficiency class – High power C

Dimensions and weight

SIZE 1 2 3 4 5
L (mm\in) 343 mm 13.71 in 473 mm 18.62 in 543 mm 21.38 in 723 mm 28.46 in 943 mm 36.22 in
W (kg\lb) 3.0 kg 6.61 lb 4.0 kg 8.42 lb 4.8 kg 10.58 lb 5.3 kg 11.68 lb 6.0 kg 13.23 lb

B Fixation

Dimensions and weight

b. Light beam angle

Light beam angle

C. QPD CONNECTORS

Warning Icon

1a. Mains and Controls combined

1-10V/DALI Bi-power
QPD 5P (M25)
No Dim
QPD 4P (M25)
Mains and Controls combined
1b Mains and Controls separated
Lumgate
Main QPD 4P (M25)
M17 (BUS IN – Male)
M17 (Bus OUT – Female)
Mains and Controls separated

D. CABLE GLANDS

Caution Icon Maintenance

Maintenance

Mains and Controls combined

Mains and Controls combined

1-10V /DALI
5×1.5mm²
Wiring Connector		 No Dim
3×2.5mm² 3×1.5mm²
Wiring Connector		 Bi-power
4×2.5mm² 4×1.5mm²
Wiring Connector
M20Ø5-12mm M16Ø4-8mm M20Ø5-12mm
  • 1-10V /DALI
    Mains and Controls combined
  • Bi-power
    Mains and Controls combined
  • No Dim
    Mains and Controls combined

SAFETY INSTRUCTIONS

  • The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. Always switch off the power prior to installation, maintenance or repair activities.

RISK GROUP

CAUTION!
Hazardous optical radiation may be emitted from this product. Do not stare at the luminaire when operating as it may be harmful to the eyes. The luminaire should be positioned so that prolonged staring at the luminaire at a distance of less than 0.94m is not expected.

ENERGY EFFICIENCY

This product contains a light source of an energy efficiency class G or higher or see table on first page.

PVC INSULATION AND Y CONNECTION

In case of PVC insulated mains cable, the installer MUST ensure that the WHOLE cable is protected against climatic conditions, especially UV rays and rain, by making sure that the cable is contained inside the luminaire and pole. Y-connection: In case of damage to the wire, it has to be replaced only by the manufacturer, distributor or by an expert, to avoid risks.
Symbols
Led face Instruction
Led Instruction
Led Instruction
www.schreder.com

Symbols

UL 1598 CSA C22.2 No. 250.0 IEC EN60598 230V 277V 347-480V 50/60Hz P IK
66 08

Schreder logo

Documents / Resources

Schreder GL2 Powerful and Efficient LED Solution [pdf] Installation Guide
137, 93, GL2 Powerful and Efficient LED Solution, GL2, Powerful and Efficient LED Solution, and Efficient LED Solution, Efficient LED Solution, LED Solution, Solution

References

Related Posts

Leave a comment

Your email address will not be published. Required fields are marked *