SCADAMETRICS TheMeterDisplay TMD Revolutionary Remote Display Instruction Manual

Utilize the pass-thru port for connecting to an AMI/AMR system
with either a 3-wire or 2-wire connection. Ensure proper wiring for
seamless integration.

Displaying Metering Data:

The display provides various metering data including gallon
registration, cubic foot registration, battery voltage indication,
meter serial number, and more. Use the display to monitor these
metrics effectively.

Wiring Instructions:

Follow the color-coding scheme provided for meter and utility
AMI/AMR terminal block hookup to ensure correct wiring. Make
adjustments as necessary based on the manufacturer’s
specifications.

FAQ:

Q: Can The Meter Display be used with any water meter?

A: The Meter Display requires a meter with 7/8/9 digit
registration, preferably a 9-digit registration meter. It also
requires Kamstrup FlowIQ with Sensus Extended Alarms for
compatibility.

Q: What if the display shows “meter not detected” despite
proper wiring?

A: If the display reports meter not detected, try all possible
wire color-coding combinations on terminals 1, 2, 3. If issues
persist, contact customer support for further assistance.

“`

View Fullscreen

SCADAMETRICS®
The Meter DisplayTM
Model TMD US Patent No. 11,041,738

The Industry’s Most Revolutionary Remote Display for Water Meters Ever!
Not just `a’ meter display The Meter DisplayTM!
SCADAmetrics is pleased to introduce the new remote display for water meters that offers every feature one could ever want! including the ability to work in conjunction with a co-connected AMI/AMR endpoint!
In the past, Meter Owners have been precluded from installing a remote wall display whenever the water meter’s signal cable was already connected to an endpoint. However, because The Meter Display is outfitted with an integral pass-thru port, it can co-exist with an AMI/AMR system. And the pass-thru port is always functional, even if the battery is depleted or removed!
The Meter Display is compatible with every late-model, encoder-type water meter in North America including those from Sensus, Neptune, Metron-Farnier, Mueller, Kamstrup, Badger, Master Meter, RG3, Zenner, Elster-AMCO, McCrometer, and many others!
Permitting If the meter is owned by the water utility, we recommend that you first contact its engineering department for permission!
1 Requires Meter with 7/8/9 Digit Registration. 9-Digit Preferred 2 Requires Kamstrup FlowIQ with Sensus Extended Alarms

Key Features
· Simple and Easy-to-Use: Just Press the Button! · For Outdoor or Indoor Use · Large, 2×16 Character Backlit Display · Built-In Pass-Thru Port for Co-Connection to an AMI/AMR
System (Works Even After Battery Depletion!) · Low Power Consumption / 10+ Year Battery Life* · User-Replaceable, Non-Proprietary Lithium Cell · Displays Registration Units (Gallons, Cubic Feet, Cubic
Meters, Liters, Acre Feet, Generic Units) · Displays Correct Decimal Point Placement · Reading Features a Comma Separator After Every 3rd Digit · Compatible with All Late-Model, North American Encoder-
Type Water Meters (Sensus 4-9-digit, Neptune 6,8,9digit, Elster K-Frame Protocols). · Displays Approximate Rate-of-Flow1. Requires Meter with 7/8/9-Digit Registration. 8/9-Digit Preferred. · Displays Water Meter Serial Number · Displays Advanced Meter Sensors and Alarms2 · Includes Non-Billable Digits (Sensus & Neptune Protocols) · Built to NEMA-4X, IP-66 Specifications. Not Submersible · Rugged Polycarbonate Enclosure with Wall-Mount Flanges · Easy Wiring, with Angled, Screw-Down Terminal Block · Battery Voltage Display · No Programming Required · NTEP-Certified
Are you interested in how SCADAmetrics meter display technology can help you more closely monitor your water meter readings? Give us a call! We’ll be glad to discuss the details!
SCADAmetrics scadametrics.com
Wildwood, Missouri USA 314.308.1710

DIP SWITCH: SET REGISTRATION UNITS AND PERSONALITY SETTINGS
ROTARY SWITCH: DECIMAL POINT POSITION

SILICONE, O-RING GASKET
ANGLED, SCREW-DOWN TERMINAL BLOCK

CR-123A LITHIUM CELL, USER-REPLACEABLE
Engineering Specifications

PASS-THRU AMI/AMR CONNECTION: 3-WIRE OR 2-WIRE
METER CONNECTION: 3-WIRE

Dimensions: Weight: Physical Display: Displayed Metering Data:
Displayed Flow Rate Data:
Displayed Battery Status: Pass-Thru Port for AMR/AMI: Meter Cable Connection: AMR/AMI Cable Connection: Programming Method: Supported Units: Supported Multipliers: Supported Divisors: Sensus Protocol Support: Neptune Protocol Support: Elster Protocol Support: Temperature: Relative Humidity: Enclosure Rating: Push-Button Rating: Manufacturing Location: Environmental: Meter Interface: NTEP-Certification: NTEP Security: Display Integrity Check: Internal Desiccant Pack: Sealing Plug: Warranty: Battery: *Estimated Battery Life:

5.75″ x 3.50″ x 1.75″ 8.5 Ounces 2×16 Characters, Temperature-Compensated, Character Dimension: 0.114 x 0.203 inch Meter Totalization, Meter Serial Number, Extended Alarms (Kamstrup Only), Non-Billable Digits (Extended Sensus & Neptune Protocols) Approximate Flow Rate. Requires 7/8/9-Digit, Fine-Resolution Water Meter Register. 8/9-Digit Preferred. Volts (New Battery ~ 3.2VDC, Depleted Battery ~ 2.2VDC) Yes, Supports both 3-Wire and 2-Wire AMR Devices 3-Position, 35deg Screw-Down Terminal Block, 12-26 AWG 3-Position, 35deg Screw-Down Terminal Block, 12-26 AWG Integrated DIP Switch and Rotary Switch Gallon, Cubic Feet, Cubic Meters, Liters, Acre-Feet, Generic “Units” x1 , x10 , x100 , x1,000 , x10,000 , x100,000 , x1,000,000 , x10,000,1000 x0.1 , x0.01 , x0.001 , x0.0001 , x0.00001 , x0.000001 , x0.0000001 Yes, Both Fixed and Variable Digit Sensus Protocols (4-9 digits) Yes, Both 8-Digit “E-Coder Plus”, and 6-Digit “Pro-Read” Protocols Yes, Auto-Fills Units and Decimal Shift Based on Elster K-Frame Protocol Information -20C to 70C (-4°F to 158°F) 5% to 95%, Non-Condensing Built to NEMA-4X and IP-66 Specifications, Not Rated for Submersion Built to IP68 Specifications USA ROHS-Compliant, Lead-Free AWWA C707-05 Certificate No. CC-20-024 Two (2) Tamper-Evident Seals, Provided & Affixed by Registered Service Agency Yes Pixel Test Pattern Displayed Yes Silica Gel, 5gm Yes 1/4″ NPT Plug. Replaces 2nd Cable Gland If AMI/AMR Pass-Thru Port Not Used. 2 Years (see www.scadametrics.com for details) Energizer 123 (EL123AP, 1500mAh) or Panasonic 123 (CR123A, 1550mAh), User-Replaceable Lesser of 10 Years or 12,000 Basic Meter Reads (Backlight OFF, Flow OFF, Meter ID OFF), Lesser of 10 Years or 10,000 Enhanced Meter Reads (Backlight ON, Flow OFF, Meter ID OFF). Extreme Temperature Environments May Shorten Battery Life.

Sample Screenshots

Gallon Registration

Rate in Gallons per Minute

Pixel Integrity Test

Cubic Foot Registration

Rate in Cubic Meters per Hour

Battery Voltage Indication

Cubic Meter Registration

Rate in Liters per Minute

Prompt for Flow Rate

Acre Foot Registration

Meter Serial Number Indication

Engineering Dimensions (Inches)

Status Indication

Terminal Block Hookup

Terminal

Function

Meter Clock

Meter Data

Meter Ground

Sensus Meter Color (Kamstrup, Badger, Metron-
Farnier, Master Meter, Mueller, Zenner, RG3, Nicor
Cable) Red
Green|White Black

Neptune Elster

Color

Black Red Green

White|Green Red Black

Itron ERT Cable
Black Red White|Shield

Utility AMI Clock

Utility AMI Data

Utility AMI Ground

Red Green|White
Black

Black Red Green

White|Green Black

Red

Black

White|Shield

Wiring Notes:
1. With the exceptions of Neptune Technology Group and Elster-AMCO (aka Honeywell, ABB, Kent), most meter manufacturers follow the Sensus wire color-coding scheme.
2. Meter Terminal Block Hookup (Terminals 1,2,3): Apply the color-coding that pertains to the manufacturer of the Water Meter (or manufacturer of the Specialty Cable, such as Nicor or Itron).
3. Utility AMI/AMR Terminal Block Hookup (Terminals 4,5,6): Apply the color-coding that pertains to the manufacturer of the AMI/AMR Endpoint (or manufacturer of the Specialty Cable, such as Nicor or Itron).

4. Alternative color-coding: manufacturers occasionally substitute a WHITE wire for a GREEN wire.

5. If the recommended wiring has been attempted, and the display still reports “meter not detected”, then re-try using each of the six possible wire color-coding combinations on terminals 1,2,3.

Dip Switch Settings

1 2

Meter Brand

Totalizer Units

Neptune: Kamstrup: Elster: UI-1203/Sensus:
Gal , gpm: Ft3 , gpm: M3 , lpm: L , lpm: Gal x100 , gpm: Ft3 x100 , gpm: AcreFt , gpm: Units , upm:

1=Up 1=Up 1=Down 1=Down 3=Down 3=Up 3=Down 3=Up 3=Down 3=Up 3=Down 3=Up

2=Down 2=Up 2=Up 2=Down 4=Down 4=Down 4=Up 4=Up 4=Down 4=Down 4=Up 4=Up

5=Down 5=Down 5=Down 5=Down 5=Up 5=Up 5=Up 5=Up

Display Appx Rate-of-Flow ON:

6=Up

Display Meter ID

ON:

7=Up

Backlight Enable

ON:

8=Up

Rotary Switch Settings

x 1 (No Multiplier)

x 10

x 100

x 1,000

x 10,000

x 100,000

x 1,000,000

x 10,000,000

x 0.1

x 0.01

x 0.001

x 0.0001

x 0.00001

x 0.000001

x 0.0000001

QUICK-START GUIDE
Physical Installation (Must Read!):
1. TheMeterDisplayTM is designed as an indoor/outdoor unit (but never submerged!), capable of being opened and re-sealed, thereby allowing for the user to protect the wiring and replace depleted batteries. With these capabilities also comes a heavy responsibility upon the user to properly reseal the unit!
2. Unit should be mounted on a wall or post, facing the user, and with the cable glands pointed down! (Ask yourself, “Why is this important?”)
3. If the pass-thru port is not used, the second cable gland should be replaced by the ¼” NPT plug seal!
4. Do not install more than 1 jacketed cable within a cable gland! 5. Tighten the cable gland nut after installation to ensure a proper seal. 6. Place the dessicant packs inside the display before re-sealing! Do not throw
them away! 7. Improper installation or any evidence of moisture inside the display voids
the warranty. 8. Use common sense!
Initial Setup:
1. Open Up the Enclosure by Unscrewing the Four (4) Screws. 2. Insert the Water Meter Cable Through the Left Cable Gland. 3. Land the 3 Water Meter Cable Wires on the Meter Terminal Block (Terminals
1,2,3), Per Color-Coding Specified in the Datasheet. 4. Set the Dip Switches, Per the Datasheet. 5. Set the Rotary Switch to Correctly Set the Decimal Point. 6. Press the “Read” Button and Verify That the Display’s Reading is a Perfect
Match to the Water Meter.
Optional 1: AMI/AMR Parallel Connection:
1. Insert the AMI/AMR Cable Through the Right Cable Gland. 2. Land the 3 AMI/AMR Cable Wires on the AMI/AMR Terminal Block
(Terminals 4,5,6), Per Color-Coding Specified in the Datasheet.
Optional 2: No AMI/AMR Parallel Connection:
1. Remove the Unused Cable Gland, and Replace with the Provided 1/4″ NPT Plug. Make Sure to Make Use of the Rubber Washer from the Unused Cable Gland.
Seal the Display:
1. Ensure that the Enclosed Desiccant Pack is Inserted into the Base. 2. Attach the Cover to the Base by Evenly Tightening the Four (4) Screws. 3. Tighten the Cable Gland(s) (and ¼” NPT plug seal, for 1-cable installations) 4. State-Registered Service Agent Only: Affix the Two (2) Tamper-Evident
Labels to the Left and Right Sides of the Display, Overlapping Both the Base and Cover.

NEPTUNE WATER METERS
PERSONALITY SETTINGS FOR NEPTUNE WATER METERS.

Settings for E-Coder, Pro-Coder , Mach-10, and WaterFlux 3070 Registers:

Size 5/8″, 3/4″, 1″
1.5″, 2″, 3″, 4″

Gallon DipSw.1=Up DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=F DipSw.1=Up DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=0

6″-12″ 16″, 20″

DipSw.1=Up DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=1 DipSw.1=Up DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=2

Cubic Feet DipSw.1=Up DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=E DipSw.1=Up DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=F
DipSw.1=Up DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=0 DipSw.1=Up DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=1

Cubic Meters DipSw.1=Up DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=D DipSw.1=Up DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=E
Special Case! For 1.5″ T-10 with E-Coder, Set RotarySw=D DipSw.1=Up DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=F DipSw.1=Up DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=0

Settings for Auto H65N Pro-Read Registers:

Size 5/8″, 3/4″, 1″
1.5″, 2″, 3″, 4″
6″-12″
16″, 20″

Gallon DipSw.1=Up DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=1 DipSw.1=Up DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=2 DipSw.1=Up DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=3 DipSw.1=Up DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=4

Cubic Feet DipSw.1=Up DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=0 DipSw.1=Up DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=1 DipSw.1=Up DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=2 DipSw.1=Up DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=3

Cubic Meters DipSw.1=Up DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=F DipSw.1=Up DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=0 DipSw.1=Up DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=1 DipSw.1=Up DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=2

BADGER WATER METERS
PERSONALITY SETTINGS FOR BADGER ENCODER REGISTERS.

Settings for HRE-LCD and E-Series Registers Programmed for 9 Digits:

Size 5/8″, 3/4″, 1″
1.5″, 2″, 3″, 4″
6″-10″
12″, 16″, 20″

Gallon DipSw.1=Down DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=E DipSw.1=Down DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=F DipSw.1=Down DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=0 DipSw.1=Down DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=1

Cubic Feet DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=D DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=E DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=F DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=0

Cubic Meters DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=C DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=D DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=E DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=F

HRE-LCD E-SERIES

Settings for HRE-MECH and E-Series and HRE-LCD Registers Programmed for 8 Digits:

Size 5/8″, 3/4″, 1″
1.5″, 2″, 3″, 4″
6″-10″
12″, 16″, 20″

Gallon DipSw.1=Down DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=F DipSw.1=Down DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=0 DipSw.1=Down DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=1 DipSw.1=Down DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=2

Cubic Feet DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=E DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=F DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=0 DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=1

Cubic Meters DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=D DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=E DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=F DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=0

HRE-MECH

BADGER WATER METERS (cont)
PERSONALITY SETTINGS FOR BADGER ENCODER REGISTERS.

Settings for ADE Registers Programmed for 6 Digits:

Size 5/8″, 3/4″, 1″
1.5″, 2″, 3″, 4″
6″-10″
12″, 16″, 20″

Gallon DipSw.1=Down DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=1 DipSw.1=Down DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=2 DipSw.1=Down DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=3 DipSw.1=Down DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=4

Cubic Feet DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=0 DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=1 DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=2 DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=3

Cubic Meters DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=F DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=0 DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=1 DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=2

ADE

SENSUS WATER METERS
PERSONALITY SETTINGS FOR SENSUS ENCODER REGISTERS.

Settings for iPerl, Omni-Series, HydroVerse, and ICE Registers Programmed for 8 Digits:

Size 5/8″, 3/4″, 1″
1.5″, 2″, 3″
4″-12″ 4″-24″ Prop
16″ Turbo 30″+ Prop

IPERL
OMNI (use black cable)
OMNI-PLUS (use encoded cable, right)

HYDROVERSE

ICE

SENSUS WATER METERS
PERSONALITY SETTINGS FOR SENSUS ENCODER REGISTERS.

Settings for iPerl-Plus, and Omni-Plus Series Registers Programmed for 9 Digits:

Size 5/8″, 3/4″, 1″
1.5″, 2″, 3″
4″-12″

IPERL PLUS
OMNI-PLUS (use encoded cable, right)

SENSUS WATER METERS
PERSONALITY SETTINGS FOR SENSUS ENCODER REGISTERS.

Settings for Cordonel Registers Programmed for 9 Digits:

Size 1.5″ , 2″
3″ , 4″

Gallon DipSw.1=Down DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=0
Program Cordonel to Resolution = 1 Gal
DipSw.1=Down DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=0
Program Cordonel to Resolution = 1 Gal

Cubic Feet DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=E
Program Cordonel to Resolution = 0.01 FT3
DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=E
Set Cordonel to Extended Resolution
Program Cordonel to Resolution = 0.01 FT3

Cubic Meters DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=D
Program Cordonel to Resolution = 0.001 M3
DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=E
Program Cordonel to Resolution = 0.01 M3

CORDONEL

6″-12″

DipSw.1=Down DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=0
Program Cordonel to Resolution = 1 Gal

DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=0
Program Cordonel to Resolution = 1 FT3

DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=E
Program Cordonel to Resolution = 0.01 M3

KAMSTRUP WATER METERS
PERSONALITY SETTINGS FOR FLOW IQ 2200, 3200, 4200

Settings for Flow IQ Registers Programmed for 9 Digits:

Size 5/8″ , 3/4″ , 1″

Gallon DipSw.1=Down DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=E

Cubic Feet DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=D

Cubic Meters DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=C

1.5″ , 2″ , 3″ , 4″

Program FlowIQ to Resolution = 0.01 Gal
DipSw.1=Down DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=F

Program FlowIQ to Resolution = 0.001 FT3
DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=E

Program FlowIQ to Resolution = 0.0001 M3
DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=D

FLOW IQ 2200, 3200, 4200

6″ , 8″ , 10″ , 12″

Program FlowIQ to Resolution = 0.1 Gal
DipSw.1=Down DipSw.2=Down DipSw.3=Down DipSw.4=Down DipSw.5=Down RotarySw=0

Program FlowIQ to Resolution = 0.01 FT3
DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Down DipSw.5=Down RotarySw=F

Program FlowIQ to Resolution = 0.001 M3
DipSw.1=Down DipSw.2=Down DipSw.3=Up DipSw.4=Up DipSw.5=Down RotarySw=E

Program FlowIQ to Resolution = 1 Gal

Program FlowIQ to Resolution = 0.1 FT3

Program FlowIQ to Resolution = 0.01 M3

Kamstrup FlowIQ Extended Alarms (Non-Legacy Mode):

Water Temp (degF/degC)

Burst Now

Min Water Temp

Reverse Flow Now

Burst Recent

Max Water Temp

Recent Reverse Flow

Encoder Re-Programmed

No Recent Usage

Non-Full Pipe Now

Leak Detect Now

Meter Tamper Detect

Non-Full Pipe Recent

Leak Detect Historic

Meter Low Battery

SENSUS-COMPATIBLE WATER METERS
PERSONALITY SETTINGS FOR SENSUS-COMPATIBLE WATER METERS. ALL ENCODER METERS, EXCEPT FOR NEPTUNE AND ELSTER, ARE SENSUS-COMPATIBLE.
Sensus-compatible water meters generally feature programmable resolution; so therefore, the user must field-adjust the decimal point shift:
1. Set both dip switches 1 and 2 to the “down” position. 2. Note the Totalization Reading and Units on the water meter’s register. 3. Connect the Water Meter encoder cable to TheMeterDisplay terminals:
1(red), 2(green), 3(black). 4. Press the “Read” Button on TheMeterDisplay. 5. Adjust the Decimal Point Shift (Rotary Switch), so that the displayed reading
on TheMeterDisplay is a match to the reading on the water meter’s register. 6. Set the Units on TheMeterDisplay by setting dip switches 2,3,4.
Advanced Sensus Protocol: If the Sensus-compatible water meter features an encoded signal that includes multiplier and units information, then the TMD Display will decode this information from the meter and automatically set the correct display units and multiplier (ignoring the `units’ dip switches and the `multiplier’ rotary dial).
ELSTER-AMCO WATER METERS
PERSONALITY SETTINGS FOR ELSTER-AMCO WATER METERS (aka HONEYWELL, ABB, KENT).
Elster-AMCO (aka Honeywell, ABB, Kent) water meters generally are programmed to communicate using Elster’s “K-Frame” protocol, which embeds units and decimal point shift information within the digital message. TheMeterDisplay takes full advantage of this information and automatically configures its display settings based on that embedded information. Therefore, dip switches 3,4,5 may be left in their default positions (all down), and the rotary switch may be left in its default position (`0′).
Caveat: Elster-AMCO (aka Honeywell, ABB, Kent) water meters can be purchased to include the “Sensus” protocol. If TheMeterDisplay shows “Meter Not Detected” on the display, then retry setup while treating the meter as a “Sensus-compatible”. In this case, that means you will need to follow Sensus wire color-coding, and follow the “Sensus-Compatible” setup of the dip switches and rotary switch.

Documents / Resources

SCADAMETRICS TheMeterDisplay TMD Revolutionary Remote Display [pdf] Instruction Manual
TheMeterDisplay TMD Revolutionary Remote Display, TheMeterDisplay TMD, Revolutionary Remote Display, Remote Display, Display

References

User Manual

SCADAMETRICS TheMeterDisplay TMD Revolutionary Remote Display Instruction Manual

TheMeterDisplay TMD Revolutionary Remote Display

Specifications:

Product Usage Instructions:

Setting Registration Units and Personality Settings:

Setting Decimal Point Position:

Replacing the Battery:

Connecting to AMI/AMR System:

Displaying Metering Data:

Wiring Instructions:

FAQ:

Q: Can The Meter Display be used with any water meter?

Q: What if the display shows “meter not detected” despite
proper wiring?

Documents / Resources

References

Leave a comment

Cancel reply