GMADBT9 Bluetooth Keyboard Folding Keyboard
User Manual
Wireless Mouse
0MA08T9
FCC IO 2AMS0DBT9
DI0 005084
GMAbT10
FCC IO 2AMS0DBT10
Di0 0065064
| User’ s Manual | You Tube |
 |
 |
| https://m.facebook.com/sanwago/services/?ref=page_internal&refsrc=deprecated# | https://m.youtube.com/channel/UC0gORTX7KLqGwcHhPYvR7Xg/featured?view_as=subscriber |
Opening
Thank you for purchasing this Ergonomic mouse.
Caution
The company is not liable for any damages, such as live motion defects, data loss, etc. caused by using this product or software This product is not guaranteed to be compatible all Bluetooth-enabled devices This product is intended for use in general workplaces and homes. The company does not assume responsibility in the event of damages cued by using in any other places Refrain from using in environments where medical instruments and systems directly or indirectly related to human life are required, and where a high level of safety and responsibility is required Refrain from using directly or indirectly with equipment and computer ystems in which a high level of safety and responsibility are required Do not use this product on airplanes as it may interfere with the airplane communication system.
Please consult your doctor before using this product if you use a pacemaker or other medical device
Warnings Regarding Health
Operating the mouse, trackball, and keyboard for long periods of time can lead to pain or numbness in hands, arms, neck, shoulders, etc. Serious damage may be incurredf such use is repeated.f you feel pain or numbness while operating the mouse or eyboard, stop using it immediately and consult a doctor if necessary. Tale regular breaks from daily computer work to avoid strain on hands, arms, neck, shoulders, etc.
4.Specification¢
<Bluetooth specifcations>
| Interface | Bluetooth Ver.5.0(8LE) Class2 |
| Frequnecy range | 2402–2480GHz |
| Profle | Bluetooth5.0/H0GP(HID over GATT Profile |
24GHz wireless specifications.>
| Interface | USB 3.2/3.1 /3.0/2.0/1.1 |
| Connector Type | USB (A Type-C) |
| Wireless System | 2.4GHz RF Radio wave system *The ID between the mouse and the receiver is fixed. |
<Common speoifcations.>
| Communication Rn g e | Wooden desk (nonmagnetic material) / approx. radius 10m, Steel desk (magnetic material) / approx. radius 2m Th@radio wave transmission range varies depending on the usage environment |
| Resulution | 800-1200-1600 DPI. |
| Reading Method | Optical sensor system (Blue LED) |
| Buttons | 2 buttons, 2 side buttons, count switch button, pairing/connection switch button,wheel button (scroll) |
| Size/Weight | Wooden desk (nonmagnetic material) / approx. radius 10m, Steel desk (magnetic material) / approx. radius 2m *The radio wave transmission range varies depending on the usage environment. |
| 13 attery Performance |
Continuous operating time: 2.4G/approx.53 hours, BT/ approx.48 hours, Continuous standby time: approx.660 days, Usable days: 2.4G/ approx.67 days, BT/approx.63 days *Based on 8 hours of computer work per day, with 5% mouse operation. *The time is based on the use of alkaline batteries.Time may vary depending on the environment (temperature, battery performance). The data are the internal test results of the company, and the actual usage time shall be subject to the product received. *Note that battery performance will gradually deteriorate over time. |
5.Compatible Models
widows (0Os/v PC tablet
Android smartphone / tablet, Apple Mac series / iad series / ihone series
Models with a built-in Bluetooth module and support for the Bluetooth mouse
Name of Parts
Charging Method
Please make sure the battery is charged before using it for the first time
- Connect the mouse with the included charging cable.
- When the count switch(charging)LED light goes off, charging is complete.
Please disconnect the charging cable
Be sure to use the included charging cable for charging
Charging time is about 3 hours
Connection with Mouse
«How to connect to Bluetooth devices>
Switch on the mouse, press the paining/ connection button to switch to
- Bletooth mode, and the [ig channel BT LED blinks slowly.
- ress and hold the paining / connection button for more than seconds to make the [g channel BT LED flash quickly and enter Bluetooth paining mode /hen the following model name is displayed on the device side, the paining has been successfully completed with operation method on the device side Device name “SANWA DBT9-10”
After Pairing Operation is complete hen the power switch on the mouse is turned on,it will be connected to the device automatically.
<How to connect to 24GHz wireless devices>
Note ltis recommended to dose all other applications before connecting the mouse Switch on the mouse, press the paining/connection button to switch to 24GHz wireless (US8 A) mode or 2.4GHz wireless (Type-C mode.[skChanoel A LED blinks slowly. the mouse enters 24GHz wireless (US8 A) mode, [9kchannel CLED bils lowly. the mouse enters 24GHz wireless (Type-C mode 2Power on the computer and start the operating system 30pen the receiver storage slot, remove the corresponding receiver and then insert the receiver into the corresponding port of the device 4. Hardware detection starts automatically, and a wizard for updating the device driver will start up. (installation is completed automatically in Mac environment)
Multi -pairing Setting Method
Multi-device pairing can support 3 devices (I Bluetooth device, I device connected in 24GHz wireless (US8 A) mode, and l device connected in 24GHz wireless (Type-C) mode) and switch the connection 1Switch on the mouse,the current mode LED light will blink slowly6-7 times.
2See step 8 Connection with Mouse” to complete the connection paining of related devices respectively, each channel corresponds to one device 3Press the pairing/ connection button to switch to the appropriate channel to select the device
Once you download the driver software from the website, you can ue the button programming function
To use custom keystrokes, you need to keep the software enabled htps://www.samwa.com/download/mup.pdf
- Please access. The download will start as soon as you access it
- Save and open the fle
- lease follow the installation wizard to install the driver.
In the process of installation or use of any problem, please contact You can also refer to this document. https://www.samwa.com/download/mu.pdf
Troubleshooting
The mouse (mouse cursor) doesn’t move
- Check to make sure the paining has been severed. (see Step 9)
- Make sure that the mouse’s power has not been switched to OFF
- The battery may be low, please try to charge it.
If the mouse is not moved for some time, it takes a few moments to start up. The mouse (mouse cursor) doesn’t move.
Alf the product is not moved for sore time,it enters deep mode to conserve the battery Pressing the button on the mouse will restore movement, but it will tale a few seconds
For more information, please access here. https://www.sama.com/download/btqa.pdf
Warranty Term 1 year
Inquirie EN: support-en@samwa.com
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation, This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation,
Documents / Resources
 |
SANWA GMADBT9 Bluetooth Keyboard Folding Keyboard [pdf] User Manual GMADBT9 Bluetooth Keyboard Folding Keyboard, GMADBT9, Bluetooth Keyboard Folding Keyboard, Keyboard Folding Keyboard, Folding Keyboard |
