Rainpos Half Square Triangles
Math:
Add 7/8″ to the desired Finished size of the HSTs.
Example: You need 3″ Finished HSTs. Add 7/8″, the measurement you need is 3 7/8″.
Cutting Instructions
Cut one square each of two different fabrics using the measurement you calculated above.
Sewing Instructions
- On the back of one of these squares of fabric, draw a single diagonal line.
- Stack the two squares, right sides together.
- Sew a seam ¼” on either side of the drawn line.
- Cut the two halves apart on the drawn line.
- Open each HST unit, press the seam allowances to one side, and trim the dog ears.
Documents / Resources
 |
Rainpos Half Square Triangles [pdf] Instructions Half Square Triangles, Square Triangles, Triangles |