S5300-24T6X Stackable L3 1 or 10G Switch for Aggregation to Large Scaled Networks
www.qsfptek.com
S5300-24T6X
Stackable L3 1/10G Switch for Aggregation to Large-Scaled Networks
I. Product Overview
S5300-24T6X is a new generation of aggregation 1/10G switch. It is targeted at the IP MAN (metropolitan Area network), campus networks and enterprise networks. It is developed on the basis of high-performance hardware and BDROS software platform with own independent intellectual property rights. It supports multiple services like IPv6,VPN and network security based on L2/L3/L4 wire-speed switching service. It also supports non stop upgrade, continuous forwarding, graceful restarting and redundancy protection.
II. Innovative Virtual Cluster Switching Technique
Stackable BVSS (Virtual Switch System)
BVSS makes full use of each link in the physical devices, which avoids STP blocking the link and protects the original link to the maximum extent.
Improved Performance
virtualize multiple physical devices into one. The performance, reliability and management of the virtual system are superior to the physical ones.
High Reliability
Based on the advanced distribution mechanism and efficient cross-physical link aggregation link function, the logic control plane, service control plane and service data plane are separated. Thus, the device can support continuous layer-3 routing forwarding, avoiding service interruption as a result of a single point of failure.
sales@qsfptek.com
www.qsfptek.com
Easy Management
BVSS realizes single IP management, greatly improving the networking efficiency and lowering the operating cost.
III. Product Characteristics
Carrier-Level QoS Policies
Supports priority retagging and complicated flow classification based on VLAN, MAC, source address, destination address, IP or priority to better streamline carrier’s services.Supports flexible bandwidth control policies and supports port-/flowbased flow limit, and ensuring the line speed forwarding of each port to make sure the high quality of video, audio and data services. Supports 8 priority queues by each port.Supports multiple queue schedule algorithms such as SP, WRR, and SP+WRR.
Varied Service Characteristics
Supports layer-2 and layer-3 multicast routing protocol, which enable the device can access to IPTV,HD video surveillance and HD video conference. Supports layer-3 routing protocol and super-large routing table capacity, which enables the device is available in large campus networks, enterprise networks and industry networks.
Versatile IPv6 Solution
Supports the IPv6 protocol suite, IPv6 neighbor discovery, ICMPv6, path MTU discovery, DHCPv6, etc.Supports Ping, Traceroute, Telnet, SSH, ACL. Supports MLD, MLD Snooping, IPv6 static routing, RIPng, OSPFv3 and BGP4+, etc. Supports IPv6 tunnel: manual tunnel, automatic tunnel, GRE tunnel, 6to4, ISATAPSupports IPv4 transits to IPv6: IPv6 manual tunnel, automatic tunnel, 6 to 4 tunnel, ISATAP tunnel.
Industrial Ethernet Ring with Zero Delay and Zero Packet Loss
Supports industry-level EAPS and ERPS, and their protection recovery time is less than 50ms. Their high reliability is represented by the null packet loss, which has been proved by many years of application in the Grid, rail transportation and defense systems.
Complete Security Mechanism
Equipment-Level Security: The advanced hardware infrastructure design realizes the level-based packet
sales@qsfptek.com
www.qsfptek.com
schedule and packet protection, prevents DoS-/TCPrelated SYN Flood, UDP Flood, Broadcast Storm or large traffic attacks, and supports level-based command line protection, endowing different levels of users with different management permissions.Security Authentication Mechanism: IEEE 802.1x, Radius and BDTacacs+Enhanced Service Security Mechanism: supports the plaintext or MD5 authentication of relevant routing protocol, URPF, deep inspection of hardware packet, control packet and data packet and filtering technology.
Innovative Energy-Saving Design
Intelligent power management: The power system supports real-time monitoring the device and the slow-start. It is also power-saving. Intelligent fan management system: The fan system supports automatic speed regulation, which efficiently slow the fan speed and mitigate the noise. Complies with the international standard IEEE 802.3a.
Flexible and Convenient Management and Maintenance
Supports management modes such as the console port, Telnet, SSH, etc. Supports the WEB management mode, which is easy and efficient so that it makes installation and
debugging convenient. Supports TFTP-patterned file upload/download management. Supports ISSU (In-Service Software Upgrade). Suppor ts SNMP and NMS smart network management platform to realize automatic equipment discovery,network topology management, equipment configuration management, performance data statistics and analysis and trouble management.
IV. Product Specifications
|
Item |
S5300-24T6X |
|
Interface |
24x 10/100/1000BASE-T RJ45ports6x 10GE/GE SFP+ uplink ports |
|
Console |
1x RJ45 Port |
|
Switching capacity |
168 Gbps |
|
Forwarding rate |
126 Mpps |
|
Chassis Dimensions (HxWxD ) (mm) |
44x440x350 |
|
Package Dimensions (HxWxD) (mm) |
94x576x448 |
|
Power supply |
2 (1+1 Redundancy) hot-swap |
|
Power supply AC: 100V-240V (hot-swap) 50Hz±10% |
75W
|
|
Total output BTU (1000BTU/H=293W) |
255.97 |
|
Fan number |
2 (1+1 Redundancy) |
|
Noise@25°C(dBA) |
45 |
V. Features
|
MTBF(H) |
>200,000 |
|
Forwarding mode |
Store-forward |
|
Flash (MB) |
16 |
|
DRAM (MB) |
512 |
|
MAC |
32K |
|
Buffer size(MB) |
2 |
|
Routing table IPv4 |
12278 |
|
Routing table Ipv6 |
4095 |
|
Total SVI |
1K |
sales@qsfptek.com
www.qsfptek.com
|
Security |
⮚ Port isolation, Port security, and “IP+MAC+port” binding, MACsticky,& IP source guard ⮚ IEEE 802.1x, Radius and BDTacacs+ ⮚ L2/L3/L4 ACL flow identification and filtration Anti-attack fromDDoS,TCP’s SYN Flood, UDP Flood, etc. ⮚ Broadcast/multicast/unknown unicast storm-control ⮚ MD5, SHA-256, RSA-1024, AES256, etc |
|
Reliability |
⮚ Static/LACP link aggregation, Interface backup ⮚ BVSS virtual-stacking ⮚ EAPS and ERPS ⮚ URPF, LLDP ⮚ ISSU ⮚ VRRP ⮚ 1+1 power backup |
|
Management |
⮚ Console, Telnet, SSH v1/2, HTTP, HTTPS ⮚ SNMP v1/v2/v3, RMON ⮚ TFTP, FTP, SFTP ⮚ NTP, SPAN, RSPAN ⮚ sFlow |
|
Accessories |
⮚ Power cord, rackmount kits, console cable |
|
Environment |
⮚ Operating temperature/humidity: 0℃-50℃,10%-90%non condensing⮚ Storage temperature/humidity: -20℃-70℃, 5%-95%non-condensing |
|
Certification |
⮚ CE, FCC, ROHS |
|
Feature |
S5300-24T6X |
|
Stackability |
8 |
|
MAC address Capacity |
32766 |
|
Jumbo frame |
9K |
|
ARP Capacity |
8191 |
|
NDP Capacity |
2048 |
|
VLAN IDs |
4K |
|
MSTP Instance Num |
32 |
|
QoS ipv4 flow entry |
ifp：2303 efp：768 |
|
QoS ipv6 flow entry |
ifp：1088 efp：768 |
|
IPv4 ACL |
ifp：2303 efp：768 |
|
IPv6 ACL |
ifp：1088
|
|
|
efp：768 |
|
FIBv4 |
8191 |
|
FIBv6 |
2048 |
|
Multicast Routing Table（IPv4) |
6k |
|
Multicast Routing Table（IPv6) |
× |
|
Maximum VRRP Group Num |
255 |
|
Maximum MLAG Group Num |
× |
|
VXLAN tunnel |
× |
VI. Odering Information
|
Item |
Description |
|
S5300-24T6X |
Ethernet routing switch with 24x GE and 6x 10GE ports (1x RJ45console port, 24x 10/100/1000BASE-T RJ45 ports, 6x 10GE/GESFP+uplink ports; 2x power slots with 1 hot-swap AC220V power supply; the cooling fan, 1U, standard 19-inch rack-mounted installation) |
sales@qsfptek.com
Documents / Resources
 |
QSFPTEK S5300-24T6X Stackable L3 1 or 10G Switch for Aggregation to Large Scaled Networks [pdf] User Manual S5300-24T6X, Stackable L3 1 or 10G Switch for Aggregation to Large Scaled Networks, S5300-24T6X Stackable L3 1 or 10G Switch for Aggregation to Large Scaled Networks, S5300-24T6X Stackable L3 1 or 10G Switch, Stackable L3 1 or 10G Switch, L3 1 or 10G Switch, 10G Switch, Switch |
