Illuminate 7c 3D Printed Three Way Center Channel Speaker
“
Specifications:
- Product Name: Illuminate 7c DIY Speaker Kit
- Version: V1.0
- Website: www.printyourspeakers.com
Product Information:
The Illuminate 7c DIY Speaker Kit is designed for sound crafters
who want to build their custom speakers. The kit includes all the
necessary components listed below, carefully selected to enhance
your audio experience.
- Dayton RST28F-4 Tweeter
- Dayton RS52AN-8 Midrange Driver
- Dayton RS180P-4 Woofer
- Binding Posts (Dayton BPA-38G suggested)
- Various inductors, resistors, capacitors, and threaded inserts
for customization - Epoxy glue and cable ties for assembly
Product Usage Instructions:
- Step 1: Gather all the components from the parts list.
- Step 2: Assemble the tweeter, midrange driver, and woofer onto
the speaker enclosure. - Step 3: Connect the components using the binding posts and
appropriate inductors, resistors, and capacitors. - Step 4: Install the threaded inserts securely for
stability. - Step 5: Use epoxy glue to reinforce joints and secure
components in place. - Step 6: Use cable ties to organize and manage wiring inside the
speaker enclosure. - Step 7: Test your custom speaker and adjust components as
needed for optimal sound quality.
FAQ:
Q: Can I use different components than the ones listed
in the manual?
A: While we recommend using the specified
components for best performance, you can experiment with other
parts to customize your speaker.
Q: Are assembly tools included in the kit?
A: Assembly tools such as screws, threaded
inserts, glue, and cable ties are included for your
convenience.
Q: How can I contact customer support for
assistance?
A: For any questions or support, please visit
our website at www.printyourspeakers.com or email us at
support@printyourspeakers.com.
“`
V1.0
Illuminate 7c Parts & Purchase
Guide
www.print yourspeakers.com
V1.0
YOUR DIY SPEAKER SHOPPING GUIDE
Alright, sound crafters! Below is your treasure map to all the parts you’ll need for your custom speaker. We’ve sorted everything by where you can buy them to make your shopping trip a breeze. Remember, picking the right parts will amp up your audio experience!
QTY PER SPEAKER
1 1 2
1 pair
1 1 1 1 1 1 1 1 1 1 1
13
16
COMPONENT
Dayton RST28F-4 Dayton RS52AN-8 Dayton RS180P-4
Binding Posts (Dayton BPA- 38G suggested)
0.1mH Inductor 0.15mH Inductor 0.4mH Inductor 2.0mH Inductor 3.5mH Inductor 3.0 Ohm Resistor 4.0uF Capacitor 5.6uF Capacitor 10.0uF Capacitor 33.0uF Capacitor 90.0uF Capacitor CNC Kitchen m4 Threaded Inserts CNC Kitchen m5 Threaded Inserts
PRODUCT CODE
RST28F-4 RS52AN-8 RS180P-4
BPA-38G
AC20-10 AC20-15 AC20-40 AC202 IC183-5 DNR-3.0 DMPC-4.0 DMPC-5.6 DMPC-10 DMPC-33 DMPC-90
M4x8.1
M5x9.5
13
M4 10mm Cap Head Screws
16
M5 10mm Cap Head Screws
~10ml 15
Epoxy Glue Cable Ties (small, <5mm wide)
WHERE TO GET IT EU, US, AU
US, EU, AU US, EU, AU US, EU, AU
US, EU, AU
US, EU, AU US, EU, AU US, EU, AU US, EU, AU US, EU, AU US, EU, AU US, EU, AU US, EU, AU US, EU, AU US, EU, AU US, EU, AU
World Wide
World Wide
Local Hardware Store, Speaker Component Store, Amazon (Search: M4 10mm socket head cap screw)
Local Hardware Store, Speaker Component Store, Amazon (Search: M5 10mm socket head cap screw)
Local Hardware Store, Speaker Component Store, Amazon
Local Hardware Store, Speaker Component Store, Amazon
www.print yourspeakers.com
01
V1.0
QTY PER SPEAKER
1-2 sticks
COMPONENT
Hot Glue
20g
Solder
200cm
Speaker wire
500x500mm
Dacron Sheet
~5.5kg 10g
PLA Printer Filament
TPU Printer Filament for feet (alternatively you can purchase rubber feet)
PRODUCT CODE
WHERE TO GET IT EU, US, AU
Local Hardware Store, Speake Component Store, Amazon
Local Electronics Store, Speaker Component Store, Amazon
Local Electronics Store, Speaker Component Store, Amazon
Local Sewing/Craft Store, Amazon, eBay
Any 3D printing store
Any 3D printing store
Link not working? Item out of stock?
No worries! Just shoot us an email at help@printyourspeakers.com, and we’ll update the guide and help you find what you need.
www.print yourspeakers.com
02
Documents / Resources
 |
PYS Illuminate 7c 3D Printed Three Way Center Channel Speaker [pdf] User Guide Illuminate 7c, Illuminate 7c 3D Printed Three Way Center Channel Speaker, 3D Printed Three Way Center Channel Speaker, Three Way Center Channel Speaker, Center Channel Speaker, Speaker |