PYS GLOW 4c 3D Printed Center Channel Speaker
Specifications
- Recommended Amplifier Power: Not specified
- Nominal Impedance: Not specified
- Sensitivity: Not specified
- Frequency Response (-3dB): Not specified
- Frequency Response (-10dB): Not specified
- Low Frequency Drivers: Not specified
- High Frequency Driver: Not specified
- Dimensions (H x D x W): Not specified
Product Information
The Glow 4c is a compact 4-inch, two-way center speaker designed to complement the Glow 4 pair. It emphasizes clear vocal reproduction and maintains punchy bass without the need for an additional subwoofer. Ideal for small to medium living rooms or home theaters, the Glow 4c ensures a balanced audio experience.
Product Features
- Compact design for easy placement
- Two-way speaker configuration for detailed sound
- Optimized for center channel audio delivery
- Enhanced vocal clarity
- Punchy bass performance
Product Usage Instructions
- Choose an appropriate location for the Glow 4c, ideally centered below or above your display unit.
- Connect the speaker wires from your amplifier or AV receiver to the designated terminals on the back of the Glow 4c.
- Ensure the amplifier or receiver settings are configured to match the specifications of the Glow 4c.
- Adjust the speaker position and angle to optimize sound projection towards the listening area.
- Test the audio output and make further adjustments if necessary to achieve the desired sound quality.
Description:
Meet the Glow 4c—a compact 4-inch, two-way centre speaker built to sit perfectly between your Glow 4 pair. It locks voices front-and-centre with crystal-clear detail, keeps bass punchy enough that you won’t rush for a sub. Pop it under the telly in a small to medium lounge or home theatre.
Features:
- Great Sound: Outstanding Sound: 25mm soft dome tweeter for crystal-clear detail, paired with two
- high-excursion 4-inch woofers for rich mids and deep bass.
- Limitless Customization: Choose from thousands of 3D printer filaments for a truly personalized finish.
- Simple to Print and Assemble: With detailed sourcing guides, step-by-step instructions, and STLs, building your speaker is a breeze.
- Incredible Value: Delivers top-notch performance that rivals more expensive, off-the-shelf models, offering unbeatable quality and bang for your buck.
SPECIFICATION
| Recommended amplifier power | 20-160 Watts |
| Nominal Impedance | 8 Ohm |
| Sensitivity | 86dB (2.83v/1m) |
| Frequency Response (-3dB) | 60Hz – 20kHz |
| Frequency Response (-10dB) | 47Hz – 20kHz |
| Low Frequency Drivers | 4-inch paper cone (TCP115-4) |
| High Frequency Driver | 25mm fabric dome (ND25FA-4) |
| Dimensions (HxDxW) | 140x186x322mm |
Frequently Asked Questions
Q: What is the recommended amplifier power for the Glow 4c?
A: The recommended amplifier power for the Glow 4c is not specified in the provided information. It is advisable to consult the manufacturer or refer to additional documentation for this detail.
Q: Can the Glow 4c be used as a standalone speaker?
A: The Glow 4c is designed as a center speaker to complement the Glow 4 pair. While it can function independently, its performance is optimized when used in conjunction with compatible speakers.
Q: How should I clean the Glow 4c?
A: To clean the Glow 4c, use a soft, dry cloth to gently wipe the speaker surface. Avoid using abrasive cleaners or liquids that may damage the speaker’s finish.
Documents / Resources
 |
PYS GLOW 4c 3D Printed Center Channel Speaker [pdf] Owner's Manual GLOW 4c 3D Printed Center Channel Speaker, GLOW 4c, 3D Printed Center Channel Speaker, Printed Center Channel Speaker, Center Channel Speaker, Channel Speaker, Speaker |