PYLE PDWM4120 Portable UHF Wireless Microphone System
INTRODUCTION
Portable UHF Wireless Microphone System – Battery Operated Four Bluetooth Cordless Microphone Set with 50 Channels Selectable Frequency, Receiver Base, AUX, for PA Karaoke DJ Party – Pyle PDWM4120
For artists and speakers, a four-handed wireless microphone system with a channel selection feature offers 50 options for each channel, removing any potential ambiguities and providing audio that is sufficiently accurate. The Bluetooth music streaming capability of the wireless handheld microphone is compatible with the newest devices. Talkover voice-over adjustable frequency with digital display audio configuration and an acoustic pop filter are additional features.
The receiver has a straightforward plug-in operation using a power adapter, while these 4 microphones are powered by 2 AA batteries. allows you to adjust each channel’s volume independently so you can balance the vocals as you see fit. With these cordless vocal mics, you can use the AUX port to stream audio from other sources. Audio input/output: 3 5mm The UHF wireless microphone has a 6 3mm balanced mixed output and a 6 3mm wired mic input. With its receiver base, the wireless professional microphone is provided. 4 wireless microphones RCA-to-AUX cable, 3 5mm 14″ audio cable and an AUX cable Can be applied to business and office karaoke Perfect for a DJ party during a PA conference
PDWM4120 RECEIVER FRONT PANEL
- Wired Mic Input
- Wired Mic Volume Control
- Wireless Mic A Volume Control
- Wireless Mic B Volume Control
- Wireless Mic C Volume Control
- Wireless Mic D Volume Control
- ECHO Knob
- Music Volume Control
- RF LED indicator lights
- AF LED indicator lights
PDWM4120 RECEIVER BACK PANEL
- 5mm Audio Input
- 5mm Audio Output
- 1/4” (6.35mm) Audio Output
- Power DC input
- Power ON/OFF Switch
- 4 Antennas
PDWM4120 HANDHELD MICS
- Metal Grill & Cartridge
- Digital Display: Frequency, Battery Volume, Channel
- ON/OFF Switch: Press for 3 seconds
- Frequency Selectable button
SYSTEM OPERATION
- Do not turn ON the transmitter before turning ON receiver. Turn the volume to minimum level, then press the ON/OFF switch on receiver. The Receiver is ON.
- Put the batteries correctly on the battery compartment, press ON/OFF switch for 3 seconds, the transmitter is ON.
- After turning on the transmitter, the RF indicator is lit, turn the volume to suitable level. Then speak to the microphone, AF indicator is lit. If there is no sound and the indicator is not lit, it means the system is working abnormally, please send it to recondition.
- The Frequency Selectable Button can adjust the transmitter with different frequency. Press one to change the frequency. The receiver can match the frequency automatically. Wireless Mic A, B, C, D has different frequency. Transmitters do not interfere with each other. If you need several systems to work at the same time, please adjust the transmitters with different frequency.
- If you will not use it for a long time, please turn OFF the system and take out the AA batteries.
TRANSMITTER SETTING
DIGITAL DISPLAY INTRODUCTION
- Battery Display (BATT): Shows the battery dump energy. When the battery is low, this icon will flash, please replace with new batteries to ensure the transmitter is working normally.
- CHANEL: Show the working channel of transmitter.
- FREQUENCY: Show the working frequency.
WIRELESS BT STREAMING CONNECTION
- Turn on Wireless BT of audio sources devices (e.g. Smart phone).
- Search the Wireless BT name of receiver, named “PYLE”.
- Comple the pairing of audio sources devices (e.g. Smart phone) and receiver.
- Then play the music from the source device. You will hear the music come out from the speaker.
ADJUSTING SUGGESTIONS
- Wired microphone volume (MIC. VOL): 60%
- Wireless microphone volume (VOL. A, VOL. B): 60%
- BASS: 30%
- TREBLE: 60%
- ECHO: 60%
TROUBLESHOOTING
| Trouble | Indicator Lights Status | Solution |
| Turn on the transmitter. | ||
| Transmitter’s display | Make sure the battery | |
| is not lit | +/- pole is correct. | |
| Replace new battery | ||
| Adjust the volume of | ||
|
No Sound |
Receiver RF LED indicator is lit | receiver. Check the cable
connection between receiver and |
| or sound is weak | Amplifier/Mixer. | |
| Remove the nearby | ||
| metal items from receiver. | ||
| Receiver RF indicator | Check if there is barrier | |
| is not lit. Transmitter | between transmitter and | |
| display is lit | receiver. Make the | |
| transmitter close to the | ||
| receiver | ||
| BATT icon flashing | Replace battery | |
| Remove the nearby | ||
| interference source (eg.CD | ||
| player, PC, Digital device, | ||
| in-Ear monitor system). | ||
| Distortion or Squeal | Receiver RF indicator is ON | Change the frequency of the transmitter. Replace
battery. If several systems |
| are used at same time, | ||
| please increase the | ||
| frequency space. |
PDWM4120
Home & Office UHF Wireless Microphone System
Wireless BT PA Public Address Mic System with Microphone Talk-Over, Includes (4) Handheld Mics
FEATURES
- Desktop Wireless Microphone System
- PA Public Address Mic Audio Control Receiver
- Home Theater & Office Karaoke-Style Vocals
- UHF Narrow Band Audio Transmitter
- Includes (4) Handheld Mics
- Portable Battery-Operated Microphones
- Wireless BT Music Streaming Ability
- Convenient Microphone Voice-Over
- Talk-Over Ability via USB / Bluetooth Streaming Music with Microphones
- Digital LCD Display with Selectable Mic Frequency
- Integrated Antennas for Extended Wireless Range
- Simple Plug-and-Play Operation
- Built-in Acoustic Pop Filter
- Integrated Low Noise Circuitry
- Ultra-Wide Frequency Response
- Noise-Eliminating SMT Technology
- Crisp Audio Clarity for Vocals & Singing
- Connect & Stream Audio to External Devices
- 1/4” -inch (6.3mm) Wired Microphone Input
- Rear Panel 1/4” -inch (6.3mm) Unbalanced Mixed Output
- Rear Panel Aux (3.5mm) Audio Input/Output Jacks
- Audio Configuration Echo / Music / Master Vol Adjustment
- Independent Channel Volume Control
- Power ON/OFF Switch
- AF & RF Signal Frequency LED Indicator Lights
- Perfect for Professional Audio Stage & Studio Performances
- Directly Connects to Amplifiers, Stereos, Audio Processors, DJ Mixers
- Used for Home Karaoke, Classroom, Office & Business Applications
WIRELESS BT STREAMING CONNECTIVITY
- Simple & Hassle-Free Pairing
- Instant Wireless Audio Streaming Ability
- Play Music Directly from Your External Device
- Works with Smartphones, Tablets, Laptops, Computers
- Wireless BT Network Name: ‘Pyle’
- Wireless BT Version: 4.2
- Wireless Range: Up to 32’+ ft.
WHAT’S IN THE BOX
- Microphone Receiver Base
- (2) Wireless Handheld Microphones
- RCA-to-Aux (3.5mm) Cable, 4.6’ ft.
- Aux (3.5mm) Audio Cable, 3.3’ ft.
- 1/4” -inch (6.3mm) Audio Cable, 3.3’ ft.
- USB Charge Cable
- Power Adapter
TECHNICAL SPECS
- Wireless Operation: UHF Band Transmitter
- Selectable Frequency Mic Design: 50 Channel
- Microphone Element/Type: Dynamic
- Pickup/Polar Pattern: Uni-Directional
- Wireless Operating Range: Up to 165’+ ft.
- Frequency Stability: <0.002%
- Sensitivity: 2/MV
- S/N Ratio: >95DB
- Transmitted Power: 10mW
- Dynamic Range: >95DB
- Distortion: <1%, 1kHz Modulation
- Frequency Response: 50Hz-18kHz (3±dB)
- Construction Material: Metal Alloy Receiver Base, Half Engineered ABS, Half Metal Alloy Mics
- Power Supply: 120/240V (12V Power Adapter)
- Handheld Mic Size (L x W x H): 9.8’’ x 2.2’’ x 2.2’’ -inches (Each)
- Mic Receiver Base Size (L x W x H): 7.5’’ x 3.6’’ x 1.7’’ -inches
FAQs
Will this work with a portable karaoke speaker? Does the system have to be plugged into the wall?
yes it will work to a portable speaker using the Mic input port. However, you have to connect the mic system to the wall outlet. For more info, kindly visit our website pyleaudio.com. Type the model number on the search box PDWM4120.
Is a mixer required to play simultaneous sounds from your sound bar and speaker?
Most sound bars only allow one input to play at a time so yes a mixer is required.
Will this work on a computer if I connect it via Bluetooth?
it will work to all devices with 1/4″ inch mic port. For more info, kindly visit our website pyleaudio.com. Type the model number on the search box PDWM4120.
can I connect this to a Sonos arc which is connected to my tv?
It should support it.
Can I purchase a replacement transmitter that will work with the original mics?
We can provide the part/s that is available in our warehouse. For other concerns and inquiries kindly call our Customer Support Department at 718 535 1800 Press 2 then 1 from Monday to Friday 9 AM to 5 PM EST.
As PA system what kind of speaker should we buy?
I returned this product and purchased UHF Wireless Microphone System 4 Channel Microphones 4 Handheld. Each microphone uses a separate channel and it was easier to control settings.
How about the bluetooth latency?
the bluetooth version is 4.2. The latency will depend on what Bluetooth version are you using. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PDWM4120 for more details.
Is this product 110-240V?
the unit can handle 120 or 240V (12V Power Adapter). For more info, kindly visit our website pyleaudio.com. Type the model number on the search box PDWM4120.
Can you connect two sets of these together for a total of eight microphones? How do you change the channel on the box?
we highly suggest using different frequencies to avoid interruption. This is a UHF signal so you have to use VHF wireless microphone. For more info, kindly visit our website pyleaudio.com. Type the model number on the search box PDWM4120.
I see how to change the frequency on the mic, how do you change them on the receiver?
you have to remove the battery cover. In the middle of it, there’s a button there to select frequencies. Once you choose the frequency, press the “set” button on the bottom part of the microphone. For other concerns and inquiries kindly call our Technical Support Department at 718 535 1800 Press 2 then 1 from Monday to Friday 9 AM to 5 PM EST.
If I buy 2 will the mics Interfere with each other? Will it allow you to change frequency?
I only have one set but they probably will interfere each other.
My hardly used system won’t stay on. When turned on, it blinks once then off. Anyone have this issue?
I did have exact same issue at first but I proceeded to connect the rest of the wires to tv/speakers etc. and once I turned on the mics the green lights illuminate so I realized it was actually on all that time. Lights may not appear unless the mics are on/connected or you are playing sound.
I’m using this mainly for karaoke at home with 4 kids. will this work well with the Pyle wireless portable pa speaker system – 800w high powered?
yes you can connect the unit there using 1/4″ cable. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PDWM4120 for more details.
Can this system work with a lapel or wireless mic? I’d like the speaker to have a lapel mic and the group have handhelds
it will only work to all microphones that are included in the package. For more info, kindly visit our website pyleaudio.com. Type the model number on the search box PDWM4120.
I am trying to hook this to my TV and sound bar. I have sound for a brief time then it goes out
I believe the sound bar can only have 1 input.
