PYLE PLBNPS12 Subwoofer Box System
WIRING CONNECTION
Power amplifier for schematic diagram.
Connect the power amplifier to the positive and negative terminals accordingly as shown.
REMOTE CONTROL FEATURES
- Turn ON/Standby: Press this key to turn on LEDs or switch to standby mode.
- /9. Dynamic Mode button: Switch from dynamic mode to color mode or switch between dynamic modes.
- /8. Dynamic Mode Speed button: Use these buttons to adjust the dynamic mode speed. If the unit is in static mode, pressing these buttons will switch unit to dynamic mode.
- /5. Static Color Adjust button: Use this button to swith between static colors. Pressing these keys while in dynamic mode will switch the unit to static mode.
- 6/7. Brightness Adjust button: Pressing these buttons will adjust brightness while in static mode. If these buttons are pressed while the unit is in dynamic mode, it will switch to static mode.
- 10 Demo Mode button: This button will switch the unit into demo mode. While in demo mode, unit will loop through 9 of the dynamic modes with each repeating 3 times.
PLBNPS18
8” Single Series Vented Subwoofer Enclosure Rear Vented Design with Built-in Illuminating LED Lights
Technical Specs
- Construction Materials: 15mm Particle Board + Multilayer Board
- Power Rating: 400 Watts Max Power
- Voice Coil: 1.5”
- Impedance: 4 Ohms
- Magnet: 30 Oz
- Sensitivity: 89 dB
- Frequency Response: 45-800 Hz
- Remote Control Battery Operated, Requires (1) x ‘CR2025’ Batteries
- Battery Type: 3V Lithium Battery
- Battery Life: Up to 2+ Hours
- Product Dimensions (L x W x H): 17.3” x 11.8” x11.0” -inches
PLBNPS11
10” Single Series Vented Subwoofer Enclosure Rear Vented Design with Built-in Illuminating LED Lights
Technical Specs
- Construction Materials: 15mm Particle Board + Multilayer Board
- Power Rating: 500 Watts Max Power
- Voice Coil: 2.0”
- Impedance: 4 Ohms
- Magnet: 40 Oz
- Sensitivity: 90 dB
- Frequency Response: 35-500 Hz
- Remote Control Battery Operated, Requires (1) x ‘CR2025’ Batteries
- Battery Type: 3V Lithium Battery
- Battery Life: Up to 2+ Hours
- Product Dimensions (L x W x H): 18.1” x 13.0” x 12.6” -inches
PLBNPS12
12” Single Series Vented Subwoofer Enclosure Rear Vented Design with Built-in Illuminating LED Lights
Technical Specs
- Construction Materials: 15mm Particle Board + Multilayer Board
- Power Rating: 600 Watts Max Power
- Voice Coil: 2.0”
- Impedance: 4 Ohms
- Magnet: 50 Oz
- Sensitivity: 91 dB
- Frequency Response: 25-300 Hz
- Remote Control Battery Operated, Requires (1) x ‘CR2025’ Batteries
- Battery Type: 3V Lithium Battery
- Battery Life: Up to 2+ Hours
- Product Dimensions (L x W x H): 19.6” x 14.1′ x 14.5” -inches
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800 Email: support@pyleusa.com. www.PyleUSA.com.
California Prop 65 Warning
WARNING:
This product contains Nickel carbonate which is known to the state of California to cause cancer birth defects and other reproductive harm. Do not ingest.
For more info go to: www.P65warnings.ca.gov.
Documents / Resources
 |
PYLE PLBNPS12 Subwoofer Box System [pdf] User Guide PLBNPS18, PLBNPS11, PLBNPS12, Subwoofer Box System, PLBNPS12 Subwoofer Box System, Box System |
 |
PYLE PLBNPS12 Subwoofer Box System [pdf] User Guide PLBNPS18, PLBNPS11, PLBNPS12, Subwoofer Box System, PLBNPS12 Subwoofer Box System, Box System |
