6.5” Ceiling Speaker Set - 2-Way Full Range Speaker (Pair) Built-in Electronic Crossover Network-Complete Features/Instruction Guide

Universal flush mount for any flat surface In-wall/in-ceiling speaker system a flat, slim, detachable speaker grill Easy-to-use magnetic speaker grill that fastens and detaches High-fidelity sound processing technology (Hi-Fi) Full range 2-way stereo sound reproduction an electronics crossover network that is built-in. – a cone made of woven glass fiber with a rubber edge. Silk dome tweeters with compliance of one inch. a built-in clamp mounting brackets of the kind Quick-connect spring speaker terminals that are loaded made of ecologically safe ABS; – ideal for unique audio applications; – utilized in offices, homes, and businesses the contents of the box Two 6.5-inch high-fidelity speakers two magnetic speaker grills – (3) 9.8-foot speaker connection wires. – a cutout template warranty card technical information the maximum power output of 300 watts – round or circular speaker design – frequency response of 70 Hz to 22 kHz – impedance of 8 Ohm – Sensitivity at 1M/1W: 91 +/- 2 dB The diameter of the cutout.

Speaker Installation

Position the cutting guide against the required speaker placement and trace around.
Cut out the traced area using a pad saw or other suitable tool

Take the speaker unit out of the packaging and remove the grille. Connect the speaker wire to the appropriate “+” and “-” connections (select the desired tapping for 100V units)
Locate the speaker unit into the cut-out, ensuring that the 4 rotating MIxing clamps stay turned inward.

Once located, turning the 4 Mixing screws clockwise will cause the Mixing clamps to rotate outward and tighten onto the mounting surface.
Put the speaker grille onto speaker in place by magnetism.

6.5’’ In-Wall/In-Ceiling Hi-Fi Speakers

Features

In-Wall / In-Ceiling Speaker System

Universal Flush Mount for Any Flat Surface
Flat & Thin, Slim-Style Removable Speaker Grill

Convenient Magnetic Speaker Grill Quickly Attaches / Detaches
High-Fidelity (Hi-Fi) Sound Processing Technology

2-Way Full Range Stereo Sound Reproduction
Built-In Electronics Crossover Network

Woven Glass Fiber Cone with Rubber Edge
1’’ -inch High Compliance Silk Dome Tweeters

Integrated Clamp-Type Mounting Brackets
Quick Connect Spring-Loaded Speaker Terminals

Environmentally Friendly ABS Construction
Perfect for Custom Audio Applications

Used for Home, Once & Business

What’s in the Box

(2) Hi-Fi Speakers

(2) Magnetic Speaker Grills
(3) Speaker Connection Wires, 9.8’ ft.
Cut-Out Template
Warranty Card

Technical Specs

Speaker Style: Round / Circle
Impedance: 8 Ohm
Sold as: Pair

Frequently Asked Questions

Do these come with flush mount covers? If so what color?
Hi, the unit comes with (2) Magnetic Speaker Grills cover and it is color white.
Is the tweeter able to pivot?
Hi, unfortunately no.
Do these come with flush mount covers? If so what color?
It doesn’t include flush mount covers.
Any reason this can’t or won’t work in a car?
The design aspect. As these speakers were intended to mount on a wall or ceiling.
A two-way full-range speaker is what?
The woofer and tweeter are two different types of drivers found in 2-way speakers. A speaker called a woofer is made specifically to reproduce low-frequency sounds, whereas a tweeter is made to reproduce high-frequency sounds. The mid-range, woofer, and tweeter drivers, collectively known as the 3-way speaker, produce sound.
How far apart should speakers in the ceiling be?
As far apart as speakers on a typical sound system would be, speakers should be placed at least 18 inches from the wall.
What exactly are the requirements for ceiling speakers?
An external amplifier that is wired via speaker cable to each ceiling speaker is required to power all of the ceiling speakers. The Sonos Amp is the greatest multi-room option, in our opinion. Below, we go through every significant factor you should take into account while selecting ceiling speakers.
What benefit can full-range speakers offer?
Pros: Since sound originates from a “single point in space,” there are no peaks or cancellations in the frequency response caused by interference from two physically apart drivers.
How do speakers with a full range function?
Full-Range speakers span the complete vocal spectrum, as indicated by the phrase. The typical low frequency of full-range speakers is between 60 and 70 Hz. Larger units will be able to reach low frequencies with 15″ drivers, however smaller units with 10″ or less LF drivers will roll off closer to 100 Hz.
Do ceiling speakers require a receiver?

It is necessary to connect passive in-ceiling speakers to a receiver or amplifier. Speakers installed in walls and ceilings are typically passive speakers. They are thus not required to be connected to a power source. They just require a connection to a receiver or amplifier that serves as both a power and a sound source.
Is a subwoofer necessary for ceiling speakers?
Do ceiling speakers require a subwoofer? Even if ceiling speakers are capable of producing all the bass and low-end frequencies, a subwoofer will be helpful in handling them. Additionally, it significantly improves the overall sound quality of your sound system.

View Fullscreen

References

User Manual

Pyle 6.5” Ceiling Speaker Set – 2-Way Full Range Speaker (Pair) Built-in Electronic Crossover Network

Specifications

Introduction