10250000009 AI Powered Robotic Sweeper
“
Specifications
- Power Button: Yes
- LED Light Strip: Bottom, Blue
- Emergency Stop Switch: Yes
- Handle: Detachable
- Screen: Detachable with protector
Product Usage Instructions
1. Power On/Off
To power on the robot, press and hold the power button for about
12 seconds until the bottom LED light strip turns blue. To power
off, press and hold the power button for approximately 12 seconds
until the screen goes off.
2. Pause & Resume
To pause the robot during operation, tap on the screen. Tap
again to resume operation.
3. Emergency Stop
In case of an emergency, press the emergency stop switch and
rotate it clockwise to stop the working robot. Resume operation
based on the screen tips.
4. Positioning
Before starting automatic cleaning, ensure the robot is powered
on and positioned below or in front of the visual marker for
successful startup location positioning.
5. Handle Usage
Raise the handle when pushing the robot. Lower the handle when
the robot is idle or working automatically. The handle and screen
are detachable for ease of use.
Frequently Asked Questions (FAQ)
Q: How do I detach the screen from the robot for
operation?
A: You can detach the screen by opening the screen protector and
directly interacting with it, or detach the screen from the robot
and operate it separately by holding it in your hands or attaching
it to the handle.
“`
Quick start guide
1. Instructions for Buttons
1.1 Power On
Press and hold the power button for approximately 12 seconds, and the bottom LED light strip will appear in blue.
1.2 Power Off
Press and hold the power button for approximately 12 seconds till the screen goes off, indicating
: that the robot is successfully powered off. . 1.3 Pause & Tap on the screen to pause the working robot. Tap again to resume operation. % 1.4 Emergency Stop ” In case of an emergency, press the emergency stop switch to stop a working robot. Rotate the
emergency stop switch clockwise, and resume the operation according to the screen tips.
$ Caution: Before starting an automatic cleaning task, make sure the robot is powered on ” and placed below or in front of the visual marker (depending on the position of the
marker) for successful positioning at the startup location.
6 2. Instructions for Handle % When you need to push the robot, raise the handle. When the robot is idle or working automatically, 16 lower the handle.
When you need to interact with the screen, there are two options: you can either open the screen protector and directly interact with the screen, or detach the screen from the robot and operate it either by holding it in your hands or by attaching it to the handle.
16%6″$”%&.: * The robot handle and the screen are designed to be detachable.
Documents / Resources
 |
PUDU 10250000009 AI Powered Robotic Sweeper [pdf] User Guide 10250000009, 10250000009 AI Powered Robotic Sweeper, 10250000009, AI Powered Robotic Sweeper, Powered Robotic Sweeper, Robotic Sweeper |