Probots SD003-DVR Digital Display Potentiometer
Main Features
- Digital display potentlomer
- Input voltage. 6-30V DC
- Sultable for replacement of small power potentiometers
- Can be connected to the speed controller, Inverter
- Adjustable range: 0-100%, for example, If choose lOK, then the adJustable range Is 0-lOK
- The Displayed values are customiiable
- Dimensions· 79* 25*4Jmm / 3.U *1.02*1 69 Inches
General Parameters
Reference table for parameter setting
| Serial Number | Display Minimum Number | Display Maximum Number | Set Minimum Value | Set the Decimal Point D | C1o CO2 or C01 set C | |
| –
1 |
0000 | 1000 | 0000 1.0 | xxxx | C01 | |
| 2 | 0000 | 640.0 | CXX)Q | Set the Magnification BMax5.o
3.2 |
xxx.x | C02 |
| 3 | 030.0 | 080.0 | 0300 | 0.5 | XXX.X | C01 |
| 4 | -50.0 | o5o.o | 00 | 1 0 | xxx.x | C01 |
| 5 | 0’1.00 | 20.00 | 0’100 16 | XX.XX | C01 | |
| 6 | 0000 | 8000 | (X)()Q | 4.0 | xxxx | C02 |
| 7 | 1000 | 1000 | 1000 | 2.0 | xxxx | co1 |
| 8 | 00.00 | 10.00 | 0000 | 1.0 | xx.xx | C0l |
| 9 | 3000 | 5000 | 0300 | 02 | xxxx | (10 |
| 10 | 00.00 | 24.00 | cooo | 2.4 | xx.xx | rm |
| 11 | -1500 | 1500 | 150 | 0.3 | xxxx | (10 |
| 12 | 1999 | 2000 | 1000 | 20 | xxxx | CO2 |
Attention
- Standard potentiometer linear error of more than 5%
- The display range ranges from -1 999 to 9999
- If the minimum value displayed is less than -1000 or greater than 1000, consider C02 or C10 first
Terminal Definition
| Code | 4 | 5 | 1. 2. 3, | |
| Functions | Power supply + | Power supplv- | Signal output + | Signal output- |
“The specification Is subject to change without notice.
Documents / Resources
 |
Probots SD003-DVR Digital Display Potentiometer [pdf] Owner's Manual SD003-DVR, SD003-DVR Digital Display Potentiometer, SD003-DVR, Digital Display Potentiometer, Display Potentiometer, Potentiometer |