POWEROLOGY PSM009 SMARTCASE PRO plus Wireless Keyboard Case

Thank you very much for purchasing this product. Before using the product, please carefully read this User Manual to guarantee correct usage and keep it secure for future reference.

Product Overview

Pairing Guide

1. Turn the switch downwards to power on the keyboard. The display screen will light up. Turn the switch upwards to power off the keyboard.
2. Long-press FN + , and the pairing ico on the display screen will flash, indicating the device is in pairing mode.
3. Open the tablet’s Bluetooth settings and search for it. The tablet will automatically or manually search for the keyboard’s Bluetooth name (Wireless Keyboard). Once successfully connected, it will turn off.
4. Charging Indicator Light
   When the Type-C is charging, the light will be in a breathing state, remaining on when fully charged. The battery level will be displayed as %100.
5. Caps Lock Indicator Light
   This indicator shows the status of the upper/lower case. The display screen will show “A” when the upper case is on, and when it is off, it indicates the lower case. After connecting to the iPad, open iPad Settings > General > Keyboard > Physical Keyboard > Turn off using the uppercase lock key to switch languages.
   Note: Paired tablets do not need to be paired again when used. They will automatically reconnect when opened.

Shortcut Keys

Touchpad Function

Specifications

Default Factory Settings

To reset to default factory settings, hold down the, and keys simultaneously for 3 seconds. The indicator light will blink three times to indicate that the keyboard pairing information has been removed. The backlight will then return to the second white light.

Power Saving Mode

If the keyboard remains idle for 10 minutes without any input, it will \automatically enter sleep mode. To wake it up, simply press any key, and the keyboard will function normally. If the keyboard is not paired\ within 3 minutes of startup, pairing will stop. To pair again, manually press FN +.

Tips

1. Before connecting to other Bluetooth devices, ensure compatibility by checking the Bluetooth standards.
2. For longer battery life, charge the keyboard every 2 months if it is not in use for an extended period.
3. It is recommended to recharge the keyboard when the battery level drops below 15 %.
4. If there is a connection failure, delete the pairing records on the device and attempt to reconnect.

Settings

1. Operating System: iOS 15.0 or higher (device must support touch).
2. Touch Settings (after wireless pairing is successful): Navigate to Settings > GM > Touch Plate > Tap the point or double-finger auxiliary point. It is recommended to enable this feature.
3. Sensitivity Settings: Go to Settings > GM > Touch Plate > Tracking Speed. Adjust the speed to the preferred level.
4. Touch Function Abnormality:
   1. Navigate to Settings > Auxiliary Function > Touch > Enable Auxiliary Touch to open or close the group.
   2. If the tablet has no mouse coordinates, restore them using a double-finger gesture.

Safety Instructions

• Warning: Failure to follow the safety instructions may result in fire, electric shock, and damage to the keyboard equipment.
• Danger (High alert for danger)
• Warning (Moderate danger – remain vigilant)
• Attention (For minor hazards)

1. Stay away from sharp tools.
2. Stay away from sources similar to microwave radiation.
3. Do not squeeze heavy objects.
4. Avoid impacting or bending the keyboard.
5. Stay away from oils, liquids, chemicals, or other organic solutions.

Disposal

This product must not be disposed of as unsorted household waste. It is important to separate such waste for proper treatment and recycling, in compliance with local waste management regulations.

Warranty

Products that you buy directly from our Powerology website or shop come with a 24-month warranty. The 24-month warranty applies to products purchased directly from our Powerology website or store. If Powerology products are bought from any of our verified retailers, then the product is eligible for only a 12-month warranty. To extend your product’s warranty, visit our website powerology.me/warranty and fill in your details in the provided form along with an uploaded picture of the product to process your request. Once approved, you will receive a confirmation email of the extended product warranty. Upload the required information within 48 hours of purchase to be eligible for a 24-month warranty period.

For more info, please check:

• powerology.me/warranty

Contact Us

If you have any questions about this Privacy Policy, please contact

• us at: hey@powerology.me
• Website: powerology.me
• Instagram: powerology_official
• Facebook: poweroIogy.ME

FAQ

1. Can Apple phones and tablets use third-party input methods?
   • A: When connecting to an external keyboard, the iOS system only supports the Simplified Chinese Pinyin input method that comes with the Apple system. It does not support third-party input methods such as Baidu and Sogou Wubi.
2. How to use the Enter key to send messages?
   • A: Activate this setting via the messaging application. For instance, for WeChat, navigate to Me > Settings > Chat > Enter the Enter Key to Send Messages (Open).
     Note: Some applications may require an upgrade for this feature to be available.
3. What is the reason for keyboard lag?
   • A: When using the keyboard, first, check if the power is sufficient. Second, ensure that the connection is not overloaded with too many devices. Verify if the computer’s driver is functioning properly

Documents / Resources

POWEROLOGY PSM009 SMARTCASE PRO plus Wireless Keyboard Case [pdf] User Guide PSM009, PSM009 SMARTCASE PRO plus Wireless Keyboard Case, PSM009 SMARTCASE, SMARTCASE Pro Plus, SMARTCASE PRO plus Wireless Keyboard Case, Wireless Keyboard Case, Wireless Keyboard, Keyboard Case, Case

References

• User Manual