LEDriving® SMART CANBUS
LEDSC03-1
BMW X3 E1 3543
BMW X3 E1 3543 Facelift
LEDSC03-1 LEDriving Smart Canbus Anti-Flicker Adapters
Installation instructions for electronic load resistor LEDSC03-1
- Connect the SMART CANBUS (load resistor) plug to the vehicle connector.
- Connect the SMART CANBUS (load resistor) socket with the headlight.2)
Mount the SMART CANBUS (load resistor) to the vehicle’s body (metal).
Please note: Pull the cable ties until they are taut.3)
For questions regarding maintenance or technical problems, please contact OSRAM customer service via automotive-service@osram.com .4)
Documents / Resources
 |
OSRAM LEDSC03-1 LEDriving Smart Canbus Anti-Flicker Adapters [pdf] User Manual LEDSC03-1 LEDriving Smart Canbus Anti-Flicker Adapters, LEDSC03-1, LEDriving Smart Canbus Anti-Flicker Adapters, Anti-Flicker Adapters, Adapters |
