OSD Black 6.5″ Architectural Shallow Mount 70V/100V/8-Ohm in-Ceiling Speaker
Specification
- Package Dimensions
13.94 x 13.94 x 5.35 inches - Item Weight
8.62 pounds - Speaker Type
In Ceiling - Speaker Maximum Output Power
80 Watts - Impedance
8 Ohm - Brand
OSD Black
Introduction
In situations with sensitive architecture, the BK-R62TSM shallow-mounting in-ceiling speaker creates rich background sounds. This elegant flush-mount in-ceiling speaker is a member of our OSD Black series and was created for rooms where speakers must be heard but not seen. It features high-end parts and drivers like a 6.5″ graphite cone woofer with an audiophile-grade butyl rubber surround that is rigid and firm to provide smooth, deep bass with no bleed-over frequencies that muddy the sound. A 1″ titanium tweeter for incredibly accurate high frequencies balances the woofer. Titanium is a tough metal that reacts incredibly well to sounds from instruments, voices, and other high-end frequencies. This 70V/100V commercial speaker transmits sound over long distances with extremely minimal power loss and a power handling capacity of up to 80W (8-ohm).and is ideal for adding high-quality background music in dining establishments, and shopping centers, museums, and other sizable luxurious locations. Features: Architectural 70V/100V/8-om in-ceiling speaker that can handle 80W of power contains a 6.5″ stiff, incredibly light graphite cone woofer for a rich, smooth bass. High excursion butyl rubber surround of audiophile quality A 1″ titanium tweeter reproduces high frequencies with excellent accuracy.
The baffle-mounted tap setting knob is easily accessible thanks to the trim-less magnetic grill design. taps for commercial applications that are 70V/100V/8 ohm tap settings knob located on the front baffle and easily accessible includes an acoustically adjusted, sound-isolating sealed rear can to improve sound quality. For settings where aesthetics are important, a shallow mount design is ideal. A magnetic grille that is paintable integrates in with any design with ease It Ideal for high-end interiors such as museums, restaurants, and shops has taps for 70V and 100V sold alone as a speaker.
The BK-R62TSM is a flush-mount speaker that can be utilized in both residential and commercial settings. It has 70V/100V taps (8-ohm, 20W/40W, 10W/20W, 5W/10W, and 2.5W/5W) so you may connect many speakers in series without worrying about sound quality or damaging the amplifier. Soundproofing of the back can The BK-R62TSM has a sound-isolating, fire-resistant, acoustically adjusted back can to retain sound waves inside the enclosure, unlike many conventional in-ceiling speakers.
Preparation
Tools For Installation
- Pencil
- Drill
- Tape Measure
- Wire Cutter
- Phillips Screwdriver
- Utility Knife
- Safety Eye Wear
- Gloves
- Sandpaper
Speaker Wire Guide
- 18AWG minimum – for distances up to …………………. 10 ft
- 16AWG – from …………………………………..…… 10 to 50 ft
- 14AWG – from ……………………………………… 50 to 100 ft
Considerations
- Where is the best place to install the speakers?
- Where will the speakers sound the best?
- Separate the speakers 6 – 10 feet apart.
- If you intend to paint the grilles, do so before installation.
Connection
When connecting any speakers to the amplifier or receiver, always make sure the power is off. Locate the connection terminals on the back of your receiver or amplifier. Always make sure to connect the audio out from the back of your receiver or amplifier to the speakers.(See Diagram 2.)
NOTE
Not all Amplifier/Receivers can safely play more than one pair of speakers at once. Please refer to your owner’s manual for impedance and wattage compatibility. Connecting multiple speakers in a series.
Mounting
Tighten the mounting brackets by simply turning the screws on the front of the speaker baffle slowly clockwise. The mounting system and frame will secure the speaker to the dry-wall hold the speaker securely in place. Finish by attaching the included magnetic grille.
WARRANTY
All Optimal Speaker Design speaker products have a Limited Lifetime Warranty against defects in materials and workmanship. Proof of purchase must accompany all claims. During the warranty period, Optimal Speaker Design will replace any defective part and correct any defect in workmanship without charge for either parts or labor Optimal Speaker Design may replace returned speakers with a product of equal value and performance. In such cases, some modifications to the mounting may be necessary and are not Optimal Speaker Designs’ responsibility.
For this warranty to apply, the unit must be installed and used according to its written instructions. If necessary, repairs must be performed by Optimal Speaker Design. The unit must be returned to Optimal Speaker Design at the owner’s expense and with prior written permission. Accidental damage and shipping damage are not considered defects, nor is damage resulting from abuse or from servicing performed by an agency or person not specifically authorized in writing by Optimal Speaker Design
Optimal Speaker Design sells products only through authorized dealers and distributors to ensure that customers obtain proper support and service. Any Optimal Speaker Design product purchased from an unauthorized dealer or another source, including retailers, mail-over dealers and online sellers will not be honored or serviced under the existing Optimal Speaker Design warranty policy. Any sale of a product by an unauthorized source or another manner not authorized by Optimal Speaker Design shall void the warranty on the applicable product.
Damage to or destruction of components due to the application of excessive power voids the warranty on those parts. In these cases, repairs will be made on the basis of the retail value of the parts and labor. To return for repairs, you must email customer service at RMA@audiogeargroup.com for a Returned Merchandise Authorization (RMA) number# then the unit must be shipped to Optimal Speaker Design at the owner’s expense, along with a note explaining the nature of service required. Be sure to pack the speaker(s) in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit. This Warranty Does Not Cover: Damage caused by abuse, accident, misuse, negligence, or improper operation (installation) • Any products that have been altered or modified • Any product whose identifying number of decals, serial #, etc. has been altered, defaced or removed • Normal wear and maintenance.
Frequently Asked Questions
No, ceiling speakers typically function as passive speakers, which means they lack internal amplifiers and are powered by speaker cables connected to an external amplifier. Each ceiling speaker is connected to the binding posts on the amplifier to do this.
The in-wall or in-ceiling speaker’s airtight backer box will greatly dampen the sound. However, there are ways to make this soundproofing backer box even more useful. You can use two thin layers of MDF or OSB with damping compound sandwiched between them rather than just one layer of either material.
Download the Sonos app, plug in the Sonos Amp to mains power, connect the ceiling speakers with speaker cable, and the app will prompt you to choose how to utilise the Amp. When you select “surround sound,” it will calibrate so that your ceiling speakers serve as your back surround sound channels. You’re now ready to go!
I learned through my research that built-in speakers frequently have a negative rap. Further investigation revealed, however, that whether or not a back box was fitted was the most likely cause of the sound quality problem.
It is necessary to connect passive in-ceiling speakers to a receiver or amplifier. Speakers installed in walls and ceilings are typically passive speakers. They are thus not required to be connected to a power source. They just require a connection to a receiver or amplifier that can also serve as a power supply.
The majority of in-ceiling speakers are two-way, meaning they feature two drivers. High frequencies are produced by a treble driver, also known as a “tweeter,” while lower bass frequencies are produced by a bass driver, also known as a “woofer.” Both are essential for good audio.
In-ceiling speakers are a terrific option for enhancing your surround sound, as are in-wall speakers. They let you to provide an exceptional, room-flooding surround sound experience in a single room or even in a number of rooms.
Can a speaker function on its own?
An external amplifier is necessary to deliver audio output to passive speakers at the proper volume. The main advantage of this kind of design is that the customer may more easily customise their setup by selecting high-quality parts.
