OKIOLABS A3 5MP Document Camera
To download complete guides, visit: www.okiolabs.com/user-guides
Setup
- Gently move the arm from side to side to free it from the “STORE” socket.
Do not forcefully pull upward on the arm while it is horizontally attached to the base.
- Connect the arm into the “USE” socket on the base.
- Extend the arm, and then adjust the camera and the arm into your desired position.
Connect your OKIOCAM to your computer.
Download, install and launch OKIOCAM Live.
You can download it from here: www.okiolabs.com/software/okiocam-live
How to use the arm extender
- Detach the arm from the bottom of the arm extender.
- Connect the arm to the arm extender’s top socket.
Auto adjust
Adjusts focus, exposure, and white balance automatically.
Zoom
Cycles through 4 zoom levels. OKIOCAM T4K uses Lossless Sensor Zoom (LSZ) technology, enabling it to zoom without stretching any pixels and degrading the image quality.
*Lossless Sensor Zoom technology only supports resolutions up to 2048×1536.
Exposure
Cycles through exposure (brightness) levels ( range: -6 to +6).
Mode
Switch between camera modes.
Doc Cam Mode: Default image orientation. Single auto focus (AFS).
Webcam mode: Flipped image orientation. Continuous auto focus (AFC).
To download OKIOCAM software, visit: www.okiolabs.com/download
If you have any questions, please visit: support.okiolabs.com
Documents / Resources
 |
OKIOLABS A3 5MP Document Camera [pdf] User Guide T4K, T PLUS, A3 5MP Document Camera, A3, 5MP Document Camera, Document Camera, Camera |