ODIKA ET-CS-GY-81822 C Shaped End Table

Product Specifications

• Product Name: End Table
• Design: Simple and elegant
• Assembly Required: Yes
• Tools Needed: Included in the package
• Materials: Wood and metal
• Dimensions: 24 inches (L) x 18 inches (W) x 22 inches (H)
• Weight: 15 lbs

Product Usage Instructions

1. Step 1: Unboxing
   Open the package carefully and lay out all the parts on a clean, flat surface.
2. Step 2: Identify Parts
   Refer to the manual to identify each part by its corresponding number.
3. Step 3: Assembly
   1. Start by attaching part 1 to part 2 using screws A (M6*12mm).
   2. Connect part 3 to part 4 and part 5 using screws B (M5*50mm).
   3. Attach part 6 to part 7 with screws C.
   4. Secure part G to part S4 and S3 using screws D.
   5. Continue assembling the remaining parts following the numerical order indicated in the manual.

Frequently Asked Questions (FAQ)

1. Q: Are additional tools required for assembly?
   No, all necessary tools are included in the package for your convenience.
2. Q: What is the weight capacity of the end table?
   The end table is designed to support up to 20 lbs of weight.

End Table
Perfectly designed with simplicity in mind

• If you have these tools at home to assist you, assembly will be quicker.
• If not, no worries, we have included everything required for assembly in the package. 

TOOLS

INSTALLATION STEP

Documents / Resources

ODIKA ET-CS-GY-81822 C Shaped End Table [pdf] Installation Guide ET-CS-GY-81822, ET-CS-GY-81822 C Shaped End Table, C Shaped End Table, End Table, Table

References

• User Manual