U-080XP-P Optical Network Terminal
Specifications
Height: 75 mm (2.95 in)
Width: 160 mm (6.29 in)
Depth: 235 mm (9.25 in)
Weight: 2.12 kg (4.67 lb)
Mounting: Desktop, rack, or DIN rail mount
Power Consumption:
- Maximum power: 256.74 W
- Minimum power: 9.84 W
Product Overview
The Nokia Optical Network Terminal (ONT) U-080XP-P delivers
gigabit services via Gigabit Passive Optical Network (GPON) and 10
Gigabit Symmetrical Passive Optical Network (XGS-PON) interfaces.
This device provides one 10G Ethernet and seven 2.5G Ethernet user
interfaces, delivering a premium service experience for data and
video services. This ONT is compliant with standard OMCI definition
and can be managed from a remote site.
Product Usage Instructions
1. Safety Guidelines
– Always read the product guide before setting up or using the
product.
– Familiarize yourself with the product guide and warnings.
– Use the product properly.
– Contact your internet services provider for further
questions.
2. Install the ONT
- Remove the protective cap on the optical port of the ONT.
- Remove the protective cap from the optical fiber.
- Plug the optical fiber into the optical port of the ONT.
- Connect the ONT to the home router via an Ethernet cable into
the Ethernet port. - Plug the power cable into the ONT power connectors and power
the ONT on.
FAQ
Q: What should I do if the product malfunctions?
A: If the product malfunctions or fails to perform as expected,
stop using it immediately and contact your service provider for
assistance.
Q: Can I use my own power adapter with the ONT?
A: It is recommended to use the power adapter provided with your
Product to ensure proper functionality and safety.
Nokia ONT U-080XP-P Quick Reference Guide
1. Product Overview
The Nokia Optical Network Terminal (ONT) U-080XP-P delivers gigabit services via Gigabit Passive Optical Network (GPON) and 10 Gigabit Symmetrical Passive Optical Network (XGS-PON) interfaces. This device provides one 10G Ethernet and seven 2.5G Ethernet user interfaces, delivering a premium service experience for data and video services. This ONT is compliant with standard OMCI definition and can be managed from a remote site.
Figure 1 Nokia ONT U-080XP-P front view
A. Technical Specifications
Height: 75 mm (2.95 in) Width: 160 mm (6.29 in) Depth: 235 mm (9.25 in) Weight: 2.12 kg (4.67 lb) Desktop, rack or DIN rail mount Power consumption:
Maximum power: 256.74 W Minimum power: 9.84 W
B. Manufacturer Information
For Products Purchased in EU/EAA Countries The products are manufactured and imported by Nokia Solutions and Networks Oy. Karakaari 7, 02160 Espoo, Finland. Nokia is a registered trademark of Nokia Corporation.
For Products Purchased in the United States The products are imported by Nokia of America Corporation. · Offices: https://www.nokia.com/contact-us/worldwide-offices/north-america/ · Support: https://www.nokia.com/support/ · Other contacts: https://www.nokia.com/contact-us/ Please contact your Internet Services Provider in case of questions on the product.
© 2025 Nokia. Nokia Confidential Information. Use subject to agreed restrictions on disclosure and use. If you have received this document in error, do not use or copy this document for any purpose nor disclose its contents to any other person.
CID214978
3TN-00976-AAAA-TCZZB Issue 1, June 2025
Nokia ONT U-080XP-P Quick Reference Guide
2. Safety Guidelines
ALWAYS READ THE PRODUCT GUIDE BEFORE SET UP OR USE OF THE PRODUCT. IT IS YOUR RESPONSIBILITY TO FAMILIARIZE YOURSELF WITH THE PRODUCT GUIDE AND WARNINGS, AND TO USE A PRODUCT PROPERLY. CONTACT YOUR INTERNET SERVICES PROVIDER FOR FURTHER QUESTIONS.
Warning – Risk of electric shock or fire
Connect the Product power adaptor or cord to the right supply voltage (for example, 230V in Europe, Australia, South Africa and 120V in US).
The socket-outlet shall be easily accessible.
Pay attention to the power load of the electrical outlet and possible extension cord. An overburdened power outlet or damaged cords and plugs may cause electric shock or fire. Check the power cords regularly. If you find any damage, replace the cord immediately.
Do not connect the plug into an extension cord, receptacle, or other outlet unless the plug can be fully inserted with no part of the blades exposed.
Leave adequate space for heat dissipation to avoid any damage caused by overheating the Product. Do not cover the Product or its ventilation holes. Blocking the ventilation holes may cause fire.
Use the power adapter provided with your Product and do not fasten the power cable to building surfaces. Ensure the cable can move freely. Do not place heavy objects on the cable.
Do not install, use, or service this Product during a thunderstorm. There is a remote risk of electric shock from lightning.
Caution – Potential equipment damage
Follow these recommendations to protect yourself and the Product from harm:
· Do not look directly at the optical port without protection. · Do not insert any sharp object into the openings of a Product. · Do not put the Product near a heat source. Avoid placing the Product in direct sunlight. · Do not put the Product in damp or wet locations; for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement, or
near a swimming pool. Do not spill any liquid on the Product. · Do not touch the Product or its power adapter or cord with wet hands. · Do not place the Product on an unstable surface or support. · Do not place heavy objects on top of the Products. · Do not use liquid or aerosol cleaners; unplug the Product and use a soft, dry cloth for cleaning. · When connecting a PC or other electronic device to a Product, make sure you use the right cables and connect the device to the right port
of the Product. Incorrect connections may damage the device and/or the Product. · Do not open or try to open the Product. Opening or removing covers can expose you to dangerous high voltage points or other risks.
It is recommended that users and other individuals maintain a distance of at least 10 cm between themselves and the Product to avoid exposure. The Product contains components that emit an electromagnetic field and could interfere with pacemakers or other electronic medical devices. If you have a pacemaker or other implantable or personal medical device, please consult your physician or medical device manufacturer about the required minimum safe distance between the Product and your medical device.
Keep your product and accessories out of reach of pets. They could damage it and cause injury or electrocution.
If the Product malfunctions or fails to perform as expected, stop using it immediately.
The product is expected to operate at a temperature of -40 to 70 degrees Celsius for a relative humidity between 5% and 95%.
3. Install the ONT
1. Remove the protective cap on the optical port of the ONT. 2. Remove the protective cap from the optical fiber. 3. Plug the optical fiber to the optical port of the ONT. 4. Connect the ONT to the home router via an Ethernet cable into the Ethernet port. 5. Plug the power cable to the ONT power connectors, and power the ONT on.
4. LED description
The following table describes the LEDs of the device:
© 2025 Nokia. Nokia Confidential Information. Use subject to agreed restrictions on disclosure and use. If you have received this document in error, do not use or copy this document for any purpose nor disclose its contents to any other person.
CID214978
3TN-00976-AAAA-TCZZB Issue 1, June 2025
Nokia ONT U-080XP-P Quick Reference Guide
LED indicator
PON PON
PON
PON
PON PON
PON
PWR1 PWR1 PWR2 PWR2 PWR2 POE POE SWDL SWDL 2.5GE 1-7 LAN Left 2.5GE 1-7 LAN Left 2.5GE 1-7 LAN Left 2.5GE 1-7 LAN Left 2.5GE 1-7 LAN Left 2.5GE 1-7 LAN Right 2.5GE 1-7 LAN Right 10G Ethernet Left
LED color and behavior Green solid
Green flashing
Blue solid
Blue flashing
Red solid Red flashing
Off
Green solid Off Green solid Orange solid Off Green solid Off Green flashing Off Orange solid Orange flashing Green solid Green flashing Off Green solid Off Orange solid
LED behavior description
Full communication between the OLT and the ONT in XGS PON mode. This indicates that the ONT is ranged and the password is authenticated.
The ONT is synchronizing and communication is being activated in XGS PON mode. This indicates that the ONT is ranged and synchronized but not authenticated. Full communication between the OLT and the ONT in GPON mode. This indicates that the ONT is ranged and the password is authenticated.
The ONT is synchronizing and communication is being activated in GPON mode. This indicates that the ONT is ranged and synchronized but not authenticated.
O7 ranging status. No full communication between OLT and ONT (O5 without OMCI messages are downloaded), ONT is attempting to range with OLT. Mapping to O2/O3/O4/O6 ranging status. The PON is down or no link is connected between the OLT and the ONT. This indicates that the fibre is not connected or the link has failed (LOS/LOF). Power active.
No power supply.
Power active.
Power standby.
No power supply.
At least 1 ethernet port is doing power feeding to PD.
No ethernet port provides power for PD.
ONT software download in progress.
No software download in progress.
10M/100/1000M Link active
10M/100M/1000M data transmitting
2.5GE Link active
2.5GE data transmitting
LAN link if OFF or LOS
Ethernet port is doing power feeding to PD
No POE power feeding to PD device.
100M/1G/2.5G/5G link active.
© 2025 Nokia. Nokia Confidential Information. Use subject to agreed restrictions on disclosure and use. If you have received this document in error, do not use or copy this document for any purpose nor disclose its contents to any other person.
CID214978
3TN-00976-AAAA-TCZZB Issue 1, June 2025
Nokia ONT U-080XP-P Quick Reference Guide
LED indicator 10G Ethernet Left 10G Ethernet Left 10G Ethernet Left 10G Ethernet Left 10G Ethernet right 10G Ethernet right 10 GE OPT 10 GE OPT
LED color and behavior Orange flashing Green solid Green flashing Off Green solid Off Green solid Off
LED behavior description 100M/1G/2.5G/5G data transmitting. 10GE link active. 10GE data transmitting. LAN link if OFF or LOS. Ethernet port is doing power feeding to PD. No POE power feeding to PD device. 10GE link active. LAN link if OFF or LOS.
5. EU Declaration of Conformity
Hereby, Nokia Solutions and Networks Oy declares that the Product is in compliance with Low Voltage Directive 2014/35/EU; EMC Directive 2014/30/EU, Directive RoHS 2011/65/EU and 2015/863/EU, Directive Eco-design 2009/125/EC, and European Accessibility Act Directive 2019/882/EU. The full text of the EU declaration of conformity, as well as additional compliance information, is available at www.nokia.com/notices/declaration-of-conformity/.
Products are for indoor or outdoor use.
Specific precautions for EMC Warning
The Products are compliant with Class B of EN 55032. In a residential environment, this equipment may cause radio interference. The Products are tested to the requirements of EN 55032 (Emissions) and EN 55024 (immunity). There are no specific precautions which must be taken in order to comply with the requirements of Directive 2014/30/EU Essential Requirements in Section 1 of Annex I. In addition, the Products are further tested to ensure spurious emissions are within the specified limits, as well as meeting the requirements for adaptivity, which mitigates against problems caused by co-location with other wireless products. The Products are not subject to the requirements in Section 2 of Annex I of Directive 2014/30/EU for fixed installations.
End of Life Collection and Treatment
In the European Union and European Economic Area, this label indicates that this product should not be disposed of with household waste. It should be deposited in an appropriate facility to enable recovery and recycling.
The Product is marked with this symbol, which is known as the WEEE mark. WEEE stands for Waste Electronics and Electrical Equipment. Electronic products bearing or referencing the WEEE mark shown above, when put on the market within the European Union (EU) and European Economic Area (EEA), shall be collected and treated at the end of their useful life, in compliance with applicable EU and local legislation. They shall not be disposed of as part of unsorted municipal waste. Due to materials that may be contained in the Product, such as heavy metals or batteries, the environment and human health may be negatively impacted as a result of inappropriate disposal.
At the end of their life, the Products are subject to the applicable local legislations that implement the European Directive 2012/19EU on WEEE. There can be different requirements for collection and treatment in different member states of the European Union.
In compliance with legal requirements and contractual agreements, where applicable, Nokia will offer to provide for the collection and treatment of Products bearing the logo above at the end of their useful life, or Products displaced by Nokia equipment offers. The equipment can be disposed at electronic waste collection points or to stores that sell electronics.
For information regarding take-back of equipment by Nokia, or for more information regarding the requirements for recycling/disposal of the Product, contact your service provider. Regulatory compliance information, including EU Declaration of Conformity, can be found at www.nokia.com/notices/declaration-of-conformity/.
© 2025 Nokia. Nokia Confidential Information. Use subject to agreed restrictions on disclosure and use. If you have received this document in error, do not use or copy this document for any purpose nor disclose its contents to any other person.
CID214978
3TN-00976-AAAA-TCZZB Issue 1, June 2025
Nokia ONT U-080XP-P Quick Reference Guide
6. FCC Declaration of Conformity
This device complies with part 15 of the U.S. FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) these devices must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. No Unauthorized Modifications: Do not make any changes or modifications to the Product without the prior express written approval of Nokia. Any changes or modifications made without express written approval could void the user’s authority to operate the device. FCC Information to User Any product changes or modifications will invalidate all applicable regulatory certifications and approvals.
© 2025 Nokia Solutions and Networks Oy Nokia is a registered trademark of Nokia Corporation
© 2025 Nokia. Nokia Confidential Information. Use subject to agreed restrictions on disclosure and use. If you have received this document in error, do not use or copy this document for any purpose nor disclose its contents to any other person.
CID214978
3TN-00976-AAAA-TCZZB Issue 1, June 2025
Documents / Resources
 |
NOKIA U-080XP-P Optical Network Terminal [pdf] User Guide U-080XP-P Optical Network Terminal, U-080XP-P, Optical Network Terminal, Network Terminal, Terminal |