WIRELESS CONTROLLERModel: MLT-ADOB
QUICK START GUIDE

SPECIFICATIONS

THANK YOU FOR BUYING NITHO .
WE WOULD LIKE TO INTRODUCE ITS SPECIFICATIONS:

A. Full compatibility with PS3®, PS4®, PC, iOS® and Android®
B. It’s equipped with the latest motion sensing technology
C. The built-in three-axis gyroscope and three-axis accelerator can detect an omnidirectional dynamic information including Roll, Pitch and Yaw
D. It’s also featured with a dual-point capacitive sensing touchpad
E. 3.5mm headset jack enables the audio chat
F. The frontal lightbar indicates the different players and connection, glowing or lighting in different colours
G. High performance analog triggers

FEATURES

1. Buttons List:
   N (Home), Share, Option, ↑, ↓, ←, →, ×, ○, 口, △, L1, L2, L3, R1, R2, R3, VRL, VRR, RESET.
2. Supports : any version of PS4® and PS3® Console, Android® above v6.0, iOS above v13.3 and Windows 10/11
3. keeps connected up to 10 meter`s distance from the console
4. It’s equipped with a 6-axis sensor catching the controller`s movements
5. RGB LED lightbar
6. It supports the dual-point capacitive sensing touchpad
7. Equipped with 3.5mm stereo headset jack that enables the in-game chat

FUNCTION

• PS4® CONTROLLER`S FUNCTIONS
• SIX-AXIS DETAILS
  X-AXIS acceleration directions: left→right, right→left
  Y-AXIS acceleration directions: front→back, back→front
  Z-AXIS acceleration directions: up→down, down→up
• SENSOR CALIBRATION
  – Sensor calibration is automatic
  
• SLEEP MODE
  – switches to Sleep mode if it fails to connect with PS4®, PS3®, PC, iOS® and Android® or if it doesn’t receive any input for 30 minutes
• WIRELESS CONNECTION
  1. Connect the USB data cable to and to the console
  2. Press & Hold the “N” button, then the LED bar will light in single color
  Note:
  – To establish the connection between  and the console, it is required a USB to Micro-B data cable
  – After the first pairing, the data cable is no longer needed for any further pairing
• WIRELESS PC, IOS® AND ANDROID® CONNECTION
  1. Activate the search mode on the Bluetooth® options on your device
  2. Press & Hold the “N” button + “SHARE” , for few seconds untill the LED front bar starts to quickly blink
  3. Press on your device “ Pair” to successfully connect the controller
• ADONIS TEST MODE ON PC
  Follow the below instructions for the testing keys in Windows® 10
  Connect  to your computer through the Micro-B data cable, then follow the route:
  PC → Start → Control Panel→ Device and PrinterThen:
  Double click on “Wireless Controller”→ Properties
• BUTTONS LAYOUT PS4®-PS3®-PC CORRESPONDENCE
  

  PS4®/ PS3®	PC
  □	1
  ×	2
  L1	3
  O	4
  △	5
  R1	6
  L2	7
  R2	8
  SHARE	9
  OPTION	10
  L3	11
  R3	12
  PS	13
  T-PAD	14

www.nitho.com

SERVICE & SUPPORT
For any question and support request, contact us on
support@nitho.com or visit our website www.nitho.com
NiTHO GmbH – Victoriastrasse 3b – 86150 Augsburg – Germany
SUPPORT@NITHO.COM WWW.NITHO.COM NITHOGAMES NITHOGAMES

Documents / Resources

NITHO MLT-ADOB ADONIS Bluetooth Wireless Controller [pdf] User Guide MLT-ADOB ADONIS Bluetooth Wireless Controller, MLT-ADOB, ADONIS Bluetooth Wireless Controller, Bluetooth Wireless Controller, Wireless Controller, Controller

References

• User Manual