NEXXT SOLUTIONS HACLP20 Two Way Video Camera User Manual
NEXXT SOLUTIONS HACLP20 Two Way Video Camera

Contents hide
1 Appearance
2 User Manual
3 FAQ
4 1. How to fix it on the wall?
5 2. What is the lowest bandwidth when viewing the real-time video?
6 3. Why can’t I store videos and read videos properly when I insert the Micro SD(TF) card?
6.1 What’s in the Box
6.2 Documents / Resources
6.2.1 References
6.3 Related Posts

Appearance

Appearance

User Manual

  1. Power on
  2. Register an account on your Smart Life app
    STEP 1.
    Enter your mobile phone number or email address.
    Mobile Phone Number
    STEP 2.
    Enter the verification code and create a password.
    Verification Code Password
  3. Plug in
    How do I reset my device?
    • Press the Reset Button (as Pic 1) for several seconds until camera starts to
    • Optional: Insert Micro SD card as shown in Pic 1.
      Plug in
  4. Add device
    a) After entering the home page, click the “+” button or “Add” button to enter the add device page.
    Add device
    b) According to the prompts on the page, make sure the device is in the network pairing state, and then select the pairing method (Please select Bluetooth mode) to proceed with the network binding in accordance with the steps.
    Add device
    c) After the binding is successful, return to the device list. You will be able to see the device that was just bound.
    Add device
  5. Start video call
    a) Click on the device image to enter the live video page for the device.
    b) After clicking “Video Call”, you can start making video calls with the device.
    Start video call
    c) You can also call the phone by pressing the call button above the device.
    Start video call

FAQ

1. How to fix it on the wall?

a) Drill holes and fix the base on the wall with screws, buckle the camera to the base. b) Stick the base to glass, tiles or other smooth things with double-side tap or 3M glue

2. What is the lowest bandwidth when viewing the real-time video?

To ensure the fluency of video, it is advised that bandwidth isn’t lower than 512kbps.

3. Why can’t I store videos and read videos properly when I insert the Micro SD(TF) card?

To ensure normal operation of the camera, please insert the following recommended Micro SD(TF) card: Kingston 16G/32G/64G/128G SanDisk 16G/32G/64G/128G PNY 16G/32G/64G/128G

Dustbin Icon This product must not be disposed of as normal household waste, in accordance with EU directive for waste electrical and electronic equipment (WEEE-2012/19/EU).Instead, it should be disposed of by returning it to the point of sale, or to a municipal recycling collection point. The device could be used with a separation distance of 20cm to the human body.

>What’s in the Box

Smart Camera: ×1
USB Cable: ×1
User Manual: ×1
Adapter: ×1 *

*: Different products have different accessories, please refer to physical packing

Warning
Federal Communications Commission (FCC) Declaration of Conformity

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may  cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

>
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
    • >Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
    • l>

    Radiation Exposure Statement
    This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

    CE Icon Declaration Of Conformity European Notice
    Hereby, Ningbo Lingchi Technology CO., Ltd. declares that this product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU,2011/65/EU.

    Warning Statement:
    This device complies with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.”

    Please read the instruction manual carefully before using the product.
    NEXXT SOLUTIONS logo

    >Documents / Resources
    NEXXT SOLUTIONS HACLP20 Two Way Video Camera [pdf] User Manual
    HACLP20, HACLP20 Two Way Video Camera, Two Way Video Camera, Video Camera, Camera

    References

    Related Posts

    Leave a comment

    Your email address will not be published. Required fields are marked *