NETUM NE-CS-V1.0 Barcode Scanner
Specifications
- Model: NE-CS-V1.0
- Product Type: Barcode Scanner
- Optimal Distance: Maintain between the scanner and the barcode for a high success rate
- Barcode Quality: Ensure good quality, avoid wrinkled or contaminated labels
- Barcode Types: Enable the corresponding barcode type if not activated
Quick Use Guide
- https://docs.netum.net/series/CS
- For more product information, scan the QR code or visit the website.
Important Safety Instructions
- Keep the reading window clean.
- Maintain the optimal distance between the scanner and barcode for a high success rate.
- Ensure barcode quality (avoid wrinkled or contaminated labels).
- Enable the corresponding barcode type if not already activated.
Recommendations
- Follow the manual instructions for proper operation.
- Use a brush to remove dirt from the reading window.
- Use a brush to remove dirt from the reading window.
- Clean the window with a soft cloth (e.g., glasses cleaning cloth).
- Avoid storing the device in excessively hot environments.
- Keep the device away from dusty or dirty surroundings.
Disclaimer
Due to product updates, some details in this document may differ from the actual product. Please refer to the physical product for accuracy. The interpretation rights of this document belong to our company. We reserve the right to modify this manual without prior notice.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device
The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restriction.
FAQs
Q: How do I clean the reading window of the barcode scanner?
A: Use a brush to remove dirt and then clean with a soft cloth for optimal performance.
Q: What should I do if the barcode scanner is not reading barcodes correctly?
A: Ensure the barcode quality is good, maintain the optimal distance, and enable the correct barcode type for scanning.
Documents / Resources
 |
NETUM NE-CS-V1.0 Barcode Scanner [pdf] User Guide CS7501, 2ANYC-CS7501, 2ANYCCS7501, NE-CS-V1.0 Barcode Scanner, NE-CS-V1.0, Barcode Scanner, Scanner |