ZDB 4627 AI Tomzn Residual Current Circuit Breaker
Product Information
Specifications:
- Brand: Reflections
- Model: B4627
- Size: 6/6-6/0 EK/WK (Headboard), 5/0-6/6 Q/EK (Side Rails)
- Origin: Made in Vietnam
Product Usage Instructions:
Step 1: Assemble Headboard Legs
Attach Left Side Facing (LSF) Headboard Leg (B) and Right Side
Facing (RSF) Headboard Leg (C) to the Headboard (A) using Allen Key
(4) with hardware 1, 2, and 3. Do not tighten the bolts yet.
Step 2: Attach Headboard Crossbar
Connect Headboard Crossbar (D) to the Headboard Legs (B) and (C)
using Allen Key (4) with hardware 1, 2, and 3.
Step 3: Attach Footboard Legs
Attach the Footboard Legs (F) to the Footboard (E).
Step 4: Connect Side Rails
Attach Side Rails (G) to Headboard Legs (B & C) and
Footboard (E) using a wrench with hardware 6, 7, and 8.
Step 5: Install Slat Support Legs and Slats
Attach the Slat Support Legs (I) to the Slats (H). Adjust the
leveler on the Slat Support Legs (I) to ensure they are level with
the floor.
Step 6: Attach Slats to Side Rails
Attach the Slats (H) to the Side Rails (G) using a screwdriver
with hardware 9.
Frequently Asked Questions:
Q: Do I need any special tools for assembly?
A: You will need an Allen Key (4), a wrench, and a screwdriver
as specified in the hardware list.
Q: Can I assemble the product alone?
A: It is recommended to assemble the product with the assistance
of another person to make the process easier and prevent damage or
injury.
Assembly Instructions
B4627-110 REFLECTIONS 6/6-6/0 EK/WK HEADBOARD B4627-120 REFLECTIONS 6/6-6/0 EK/WK FOOTBOARD & SLATS B4627-330 REFLECTIONS 5/0-6/6 Q/EK PANEL SIDE RAILS
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts,which may have come loose inside the carton during shipment. Identify and count all items and compare with the PARTS LIST and/or HARDWARE LIST shown below. CAUTION: Please read the instructions thoroughly before assembly.
1.We recommend that you assemble this product with the assistance of another person; this will make the assembly easier, and will help eliminate damage to the product or injury to persons during assembly.
2.Please do not over tighten screws or bolts until the assembly is completed. 3.Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble
your newly purchased product correctly and efficiently.
PARTS LIST
NO
COMPONENT
DRAWING
Q’TY
A HEADBOARD
1PC
B
LEFT SIDE FACING (LSF) HEADBOARD LEG
C
RIGHT SIDE FACING(RSF) HEADBOARD LEG
D HEADBOARD CROSSBAR
E FOOTBOARD
F FOOTBOARD LEG
1PC 1PC 1PC 1PC 2PCS
HARDWARE LIST
NO
COMPONENT
DRAWING Q’TY
1 BOLT Ø5/16″x2”L
10PCS
2 LOCK WASHER Ø5/16″
10PCS
3 FLAT WASHER Ø5/16″
10PCS
4 ALLEN KEY 1/6”
1PC
5 THREADED BOLT Ø5/16″x3-1/2”L
8PCS
6 HALF MOON WASHER
8PCS
7 HEX NUT Ø5/16″
8PCS
8 WRENCH 1/2” 9 WOOD SCREW Ø8×1-1/4”L
1PC 10PCS
G SIDE RAIL
2PCS
H SLAT
5PCS
I SLAT SUPPORT LEG
10PCS
MADE IN VIETNAM
PAGE: 1OF4
Assembly Instructions
B4627-110 REFLECTIONS 6/6-6/0 EK/WK HEADBOARD B4627-120 REFLECTIONS 6/6-6/0 EK/WK FOOTBOARD & SLATS B4627-330 REFLECTIONS 5/0-6/6 Q/EK PANEL SIDE RAILS
STEP 1
Assemble LSF HB Leg (B) and RSF HB Leg (C) to Headboard (A) by using Allen Key (4) with hardware 1,2, and 3.
Attn: DO NOT TIGHEN THE BOLTS
A
B
C
BACK VIEW
21
3 4
STEP 2
Assemble Headboard Crossbar (D) to Headboard Legs (B) and (C) by using Allen Key (4) with hardware 1,2, and 3.
A
B
C
BACK VIEW
12
4
3
MADE IN VIETNAM
PAGE: 2OF4
Assembly Instructions
B4627-110 REFLECTIONS 6/6-6/0 EK/WK HEADBOARD B4627-120 REFLECTIONS 6/6-6/0 EK/WK FOOTBOARD & SLATS B4627-330 REFLECTIONS 5/0-6/6 Q/EK PANEL SIDE RAILS
STEP 3
Assemble the Footboard Legs (F) to the Footboard (E).
E
F
STEP 4
Assemble side rails (G) to Headboard Legs (B & C) and Footboard (E) by using Wrench (8) with hardware 6,7,8.
5
7
G
6
8
C
B G
E
MADE IN VIETNAM
PAGE: 3OF4
Assembly Instructions
B4627-110 REFLECTIONS 6/6-6/0 EK/WK HEADBOARD B4627-120 REFLECTIONS 6/6-6/0 EK/WK FOOTBOARD & SLATS B4627-330 REFLECTIONS 5/0-6/6 Q/EK PANEL SIDE RAILS
STEP 5
Assemble the Slat Support Legs (I) to the Slats (H). Then adjust the leveler on the Slat Support Legs(I) to level with the floor.
H I
Leveler
STEP 6
Assemble the Slats (H) to the Side Rails (G) by using a screwdriver with hardware 9.
9
H
MADE IN VIETNAM
PAGE: 4OF4
Assembly Instructions
B4627-050 REFLECTIONS DRESSER
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts,which may have come loose inside the carton during shipment. Identify and count all items and compare with the PARTS LIST and/or HARDWARE LIST shown below. CAUTION: Please read the instructions thoroughly before assembly.
1.We recommend that you assemble this product with the assistance of another person; this will make the assembly easier, and will help eliminate damage to the product or injury to persons during assembly.
2.Please do not over tighten screws or bolts until the assembly is completed. 3.Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble
your newly purchased product correctly and efficiently.
PARTS LIST
NO: COMPONENT DRAWING
Q’TY
A DRESSER
1PC
B LEG
C
DRESSER SUPPORT
D ANTI TIP KIT
4PCS 1PC 1SET
STEP 1
Locate the LEG (B) pack in the bottom drawer.
STEP 2
Assemble the LEG (B) to the Dresser (A).
A
B
MADE IN VIETNAM
B
PAGE: 1OF2
Assembly Instructions
B4627-050 REFLECTIONS DRESSER
STEP 3
Assemble the Dresser Support (C) to the Dresser (A).
A
C
STEP 4
Furniture Anti Tip Kit (D) should always be used to prevent the furniture from tipping.
Furniture Tipping Restraint Wall
Top
D
MADE IN VIETNAM
PAGE: 2OF2
Assembly Instructions
B4627-060 REFLECTIONS DRESSER MIRROR
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts,which may have come loose inside the carton during shipment. Identify and count all items and compare with the PARTS LIST and/or HARDWARE LIST shown below. CAUTION: Please read the instructions thoroughly before assembly.
1.We recommend that you assemble this product with the assistance of another person; this will make the assembly easier, and will help eliminate damage to the product or injury to persons during assembly.
2.Please do not over tighten screws or bolts until the assembly is completed. 3.Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble
your newly purchased product correctly and efficiently.
PARTS LIST
HARDWARE LIST
NO: COMPONENT DRAWING Q’TY NO: COMPONENT
DRAWING Q’TY
A DRESSER
1 BOLT Ø1/4″x1-1/2”L
8PC
1PC
2 LOCK WASHER Ø1/4″
8PC
B MIRROR
3 FLAT WASHER Ø1/4″
8PC
1PC
4 ALLEN KEY1/6”
1PC
C
MIRROR SUPPORT
2PCS
STEP 1
Assemble the Mirror Support (C) onto Dresser (A) by using Allen Key (4) with hardware 1,2, and 3.
A C
C 32 14
MADE IN VIETNAM
PAGE: 1OF2
Assembly Instructions
B4627-060 REFLECTIONS DRESSER MIRROR
STEP 2
Assemble support (C) with mirior (B) by using Allen Key (4) with hardware 1,2, and 3.
B
A
2
14
C
3
C
STEP 3
COMPLETE
MADE IN VIETNAM
PAGE: 2OF2
Assembly Instructions
B4627-070 REFLECTIONS CHEST
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts,which may have come loose inside the carton during shipment. Identify and count all items and compare with the PARTS LIST and/or HARDWARE LIST shown below. CAUTION: Please read the instructions thoroughly before assembly.
1.We recommend that you assemble this product with the assistance of another person; this will make the assembly easier, and will help eliminate damage to the product or injury to persons during assembly.
2.Please do not over tighten screws or bolts until the assembly is completed. 3.Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble
your newly purchased product correctly and efficiently.
PARTS LIST
NO: COMPONENT DRAWING
Q’TY
A CHEST
1PC
B LEG C ANTI TIP KIT
4PCS 1SET
STEP 1
Locate the LEG (B) pack in the bottom drawer.
MADE IN VIETNAM
B
PAGE: 1OF2
Assembly Instructions
B4627-070 REFLECTIONS CHEST
STEP 2
Assemble the LEG (B) to the Chest (A).
B A
B
STEP 3
Furniture Anti Tip Kit (C) should always be used to prevent the furniture from tipping. Furniture Tipping Restraint Wall Top
C
MADE IN VIETNAM
PAGE: 2OF2
Assembly Instructions
B4627-040 REFLECTIONS NIGHTSTAND W/MIRRORED TOP
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts,which may have come loose inside the carton during shipment. Identify and count all items and compare with the PARTS LIST and/or HARDWARE LIST shown below. CAUTION: Please read the instructions thoroughly before assembly.
1.We recommend that you assemble this product with the assistance of another person; this will make the assembly easier, and will help eliminate damage to the product or injury to persons during assembly.
2.Please do not over tighten screws or bolts until the assembly is completed. 3.Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble
your newly purchased product correctly and efficiently.
PARTS LIST
NO: COMPONENT DRAWING
A
NIGHTSTAND W/ MIRRORED TOP
Q’TY
1PC
B LEG C ANTI TIP KIT
4PCS 1SET
STEP 1
Locate the LEG (B) pack in the bottom drawer.
MADE IN VIETNAM
B
PAGE: 1OF2
Assembly Instructions
B4627-040 REFLECTIONS NIGHTSTAND W/MIRRORED TOP
STEP 2
Assemble the LEG (B) to the nightstand (A).
B A
B
STEP 3
Furniture Anti Tip Kit (C) should always be used to prevent the furniture from tipping.
A
Furniture Tipping Restraint Wall
Top
C
MADE IN VIETNAM
PAGE: 2OF2
Documents / Resources
 |
NCF ZDB 4627 AI Tomzn Residual Current Circuit Breaker [pdf] Installation Guide ZDB 4627 AI, B4627-110, B4627-120, B4627-330, ZDB 4627 AI Tomzn Residual Current Circuit Breaker, ZDB 4627 AI, Tomzn Residual Current Circuit Breaker, Current Circuit Breaker, Circuit Breaker, Breaker |
