Naxa Electronics NRC-190 Dual Alarm Clock with Qi Wireless Charging Function
Specifications
- Product Dimensions
8.6 x 3.5 x 3.95 inches - Item Weight
14.1 ounces - Batteries
2 AAA batteries - Power Source
Corded Electric - Mounting Type
Wall Mount - Operation Mode
Electrical - Shape
Rectangular - Brand
Naxa Electronics
Introduction
Dual alarm clock with Qi wireless charging capability has a large 1.8-inch Green LED display with outstanding contrast. Your phone or other mobile device is powered by a convenient USB charging connector. You may charge compatible smartphones and other qi-compatible gadgets without connecting them to a wall outlet or a USB port. features a stereo speaker output, a display dimmer with two levels, and a PLL FM radio with 20 presets. Power: QI/USB charge output (5V, 1a), 2 x AAA batteries, AC 100-240V converter (alarm clock backup, not included).
Important Safety Information
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
The Lighting Flash an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of a shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
WARNING
This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including am-
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the pro–patrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachment accessories specified by the rain manufacturer.
- Use only with the cart, stand, tripod, facturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the ap-paratus, the apparatus has been exposed to rain or mois-ture, does not operate normally, or has been dropped.
FCC NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must ac-cept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reaso-n able protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in acc -or dance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION ON MODIFICATIONS
grantee of this device may void the authority granted by the FCC to operate the equipment.
At a Glance
Connecting the Unit to Power
Before plugging in the AC/DC power adapter to the outlet, make sure that the voltage of your electric-ity supp ly is same as that indicated on the rating plate or power adapter.
The provided power adapter works with AC 100-240V,50/60Hz Power.
Battery backup
Battery backup will preserve the current time, alarm settings in the case of power failure or interrupt-ed AC power. Insert (2) two UM-4 batteries (AAA) into the battery compartment. Be sure to observe the prope r po battery compartment.
Setting the Clock
- Connect the AC power adapter to a wall outlet. The LED Display will illuminate
- Press the SET/MEM button, the hour digit to set the hour.
- Press the SET/MEM button twice, the minute repeatedly to set the minutes.
12-Hour / 24-Hour Mode - Press the SET/MEM button 3 times, “12H” or “24H” will display. Press the or buttons repeatedly to set the 12 or 24 hour format.
Take note of the PM LED indi cator when setting the time. - Press the SET/MEM button repeatedly until the actual time appears on the display to exit.
Setting the Alarms
With the unit in Clock mode:
- Press the ALARM/SLEEP button once, the AL 1 (Alarm 1) indicator will illuminate on the screen and the hour digit will flash. Press the or buttons repeatedly to set the hour.
- Press the ALARM/SLEEP button again, the minute digit will flash. Press the or buttons repeatedly to set the minute.
- Press the ALARM/SLEEP button again, the Alarm 1 status will appear on the display. Press the or buttons repeatedly to activate alarm, turn off alarm, and set wake up mode as illustrated below.
After alarm has been set, wait a few seconds. The unit will save the setings and exit while going back to displaying the current time. Alarm 2 Settings
With the unit in Clock mode
- Press the ALARM/SLEEP button 4 times, the AL 2 (Alarm 2) indicator will illuminate on the screen. Alarm 2 time will appear on the display and the hour digit will flash. Press the or buttons repeatedly to set the hour.
- Press the ALARM/SLEEP button again, the minute digit will flash. Press the or buttons repeatedly to set the minute.
- Press the ALARM/SLEEP button again, the Alarm 3 status will appear on the display. Press the or buttons repeatedly to activate alarm, turn off alarm, and set wake up mode as illustrated below.
- After alarm has been set, wait a few seconds. The unit will save the setings and exit while going back to displaying the current time. buttons repeatedly to set the minute.
SNOOZE
Press the SNOOZE button when the alarm is sounding to stop the alarm and have it sound again automatically at your designated Snooze setting.
Press the SET/MEM button 4 times to set Snooze interval between 5 – 60 mins. Press the or buttons to adjust and set Snooze internval.
Turning OFF the Alarm
Press the ALARM/SLEEP button to shut off the alarm and alarm will reset for the next day.
To disable the alarm completely
- Alarm 1
Press the ALARM/SLEEP button 3 times, the Alarm 1 status will display. Press the or buttons repeatedly until “OFF” is displayed. Wait a few seconds to save the settings. - Alarm 2
Press the ALARM/SLEEP button 6 times, the Alarm 2 status will display. Press the or buttons repeatedly until “OFF” is displayed. Wait a few seconds to save the settings.
How to Set the SLEEP TIMER
In Radio or AUX playback mode, press and hold the ALARM/SLEEP button until the sleep timer appears on the display to activate the sleep function. The SL indicator on the display will illuminate. Press the ALARM/SLEEP button repeatedly to set the sleep timer from 05 – 90 minutes. To turn off the sleep timer before time is up, press and hold the /MODE button to shut off.
DIMMER
Press the SNOOZE/DIMMER button repeatedly to set the brightness level of the display.
Listening to the Radio
- Press the /MODE button once to access the Radio input. The radio station number will display on the screen. (87.5 – 108)
- Press and hold the or buttons to engage the auto search and play to cycle through different radio stations.
- If reception is poor, press and release the or buttons to fine tune your desired radio station.
- To adjust the volume, press the VOL button once followed by the or buttons to adjust your desired level. (L01- L15)
- Press and hold the /MODE button to turn OFF the radio.
Radio Station Preset
- Press the /MODE button once to access the Radio input and select your desired station.
- Press and hold the SET/MEM button, “01-20” will appear on the screen and flash.
- Press the or buttons to repeatedly to select the program number of your choice.
- Then press the SET/MEM button again to store it.
- Repeat the steps above until all the desired radio stations are stored in the program list.
- Once you have completed and set your radio station presets, simply press the SET/MEM button repeatedly to select and play your desired stored radio station.
If the back up batteries aren’t installed, the preset stations may erase upon power failure to the unit. The stored radio stations can be replaced by stor-ing another new radio station. A total of 20 FM radio stations can be stored in the program.
BUILT-IN QI WIRELESS CHARGER
- Place a Qi supported mobile device on the center of the charging surface as illustrated below. The Qi inidicator light will display and your mobile device should begin charging.
- When charging has completed, please remove the mobile device from the unit.
Check the mobile device’s charging status using the charging icon displayed on the screen.
BUILT-IN USB CHARGER
- Connect the USB plug from the external USB device to the USB Charger port at the back of the unit.
- Unit should begin to charge.
- When charging has completed, please remove the mobile device from the unit.
AUX IN MODE
- Connect the AUX cable from the output jack of your MP3 player or mobile phone to the AUX input jack on the Radio.
- Press the /MODE button twice to access the AUX input. AUX will be displayed on the screen.
- Adjust the volume on both your MP3 player or mobile device and on the unit to your desired level.
Accessories
- 1 x Owner’s Manual
1 x AC/DC Adapter (Input: AC 100~240V, 50/60 Hz, 0.5A Output: DC—5V, 2000 mA)
Specifications are subject to change without prior notice.
Support
If you have problems with your device, please re-view the instructions in this manual. Please also visit us on the web at www.naxa.com to get the latest news, alerts, and documentation for your device. For additional assistance, please contact Naxa Technical Support. NAXA Technical Support
2320 East 49th St.
Vernon, CA 90058
866-411-6292
http://www.naxa.com/naxa-support/
Frequently Asked Questions
No. The alarm clock is just a regular alarm clock. But the regular alarm, radio, and wireless charging features work great.
I Just tried it and I can’t se to figure out if the radio works for the alarm. I listen to the radio every morning, though, while I’m getting ready. The antenna gets great reception in my apartment. My last radio didn’t.
It works amazingly with my iPhone 8, however wireless charging only started on iPhone with the 8 and later models. There are phone cases which plug into earlier models, enabling them to charge wirelessly.
I’ve had a wallet style case and a case with a built in stand on the back since I’ve had this wireless charging alarm clock. I’ve had no problems charging with either case.
It should work on anything that has the wireless charging capability. I personally use a iPhone X and it works. From research I believe it should work with the S8 aswell.
Yes. It works great. I was surprised how fast it charged my phone. As with all chargers, just be careful about using it for other things like music while charging. My phone got a little warm while charging on this while playing music but that’s no different from other chargers.
How do you operate the alarm clock with wireless charging?
To switch between 12-hour and 24-hour mode, press the M button (7) twice. The LED Display (1) will flash ’12H’ or ’24H’ to indicate the mode selected. The minutes will flash if you briefly press the M button (7) once. To set the minutes, press the plus and minus buttons (6).
The wireless charging standard used worldwide is Qi. Its name, which translates as “vital energy” or “an intangible flow of power,” comes from Asian philosophy. The basic premise of Qi is that every item bearing the Qi mark is compatible with every Qi charger.
Press any button on the device to silence the alarm during activation. Without pressing any buttons, the alarm will ring for 60 seconds before shutting off on its own.
Yes, wireless phone chargers do produce EMF radiation (electric and magnetic fields), however the amount is fairly little. Wireless chargers won’t be dangerous to people’s health in their current configuration.
