Version 1.10
IPTS001
Touch Display
Easy Setup Guide
MORE CHOICE FOR YOUR GROWING BUSINESS
IPTS001
1.0. Product Overview
1.1. What’s in the Box
After receiving the package, please open and inspect the product inside.
Figure 1-1 What’s in the Box
|
Item Name |
Picture | Quantity (pcs) | Description |
| Touch Display Monitor |  |
1 |
Touch Display Monitor |
|
VGA Cable |
 |
1 | Used for video signal transmission between device and monitor |
| USB-A to Type-B Cable |  |
1 |
Used for touch function between device and monitor |
|
Power Cable |
 |
1 | Provide power to monitor |
| AC Power Adapter |  |
1 |
Connect the monitor to the power cable |
|
Metal Base |
 |
1 | Used to support the monitor |
| Easy Setup Guide |  |
1 |
User Guide for Touch Display Monitor |
|
Base Stand Screw Package |
 |
1 | Used for connection between monitor and steel base |
| HDMI cable |  |
1 |
Used for signal transmission between device and monitor |
Table 1-1
1.2. Product Overview
Figure 1-2 Buttons
(1) RFU
Figure 1-3 Ports
- USB port
- Power supply port
- VGA port
- HDMI port
1) -/Down button
This button controls the downward movement in the menu interface or the reduction of a brightness parameter.
2) +/Up button
This button can control the upward movement in the menu interface, and can also increase brightness parameter.
3) Return/Quit button
Press this button in the menu interface to return to the previous interface or exit the menu interface.
4) Menu/Confirm button
The first time you press this button, the monitor will display a menu interface. In the menu interface, this button is used for entering selected sub menu or confirming the selection
5) Power button
Pressing this button turns the monitor on and off. When the power indicator lights up red, the monitor has been turned on. Else, the monitor is off.
1.2.1. Metal base Installation
To make the display stand upright on the desktop, you need to install the metal base with screws. The installation method is as follows:
Figure 1-4 Installation Direction Figure 1-5 Installation Completed
2.0. How to Connect Monitor to Your Device?
1) First use the power adapter to connect the monitor to the power supply, press the power button to make the red light of the power indicator light always on.
2) Use a VGA/HDMI cable to connect to the corresponding port of the device so that the video signal can be transmitted normally.
3) Use the USB cable to connect the monitor and the device so that the touch signal can be transmitted normally.
2.1. Connect the Windows Desktop PC with a VGA Cable
Figure 2- 1 Connect PC with a VGA Cable
- VGA cable for video signal
- USB-A to B for touch signal
- Power Cord
- Power Adapter
2.2. Connect the Windows Laptop with a HDMI Cable
Figure 2- 2 Connect Laptop with a HDMI Cable
- HDMI cable for video signal
- USB-A to B for touch signal
- Power Cord
- Power Adapter
Demo video: http://u.pc.cd/r8T
Notice: Please do not touch the connected VGA cable to avoid monitor flickering.
DO NOT TOUCH
2.3. Connect Other Devices with a HDMI/VGA Cable
- HDMI cable for video signal
- USB-A to B for touch signal
- Power Cord
- Power Adapter
- HDMI cable for video signal
- USB-A to B for touch signal
- Power Cord
- Power Adapter
Figure 2-3 Connect Other device with an HDMI/VGA Cable
2.4. Touchscreen Recognition Setting for Windows Laptop
1. If the touch function of the monitor doesn’t work after connecting the computer with a USB cable, you need to follow the steps below to make the computer recognize the monitor as a touchscreen:
2. In the search box in the lower left corner of the computer desktop, enter “Control Panel”—–Open the Control Panel interface—–Click on Tablet PC Settings—–Click on Setup
Figure 2- 4 Control Panel
Figure 2- 5 Tablet PC Settings
Figure 2- 6 Setup interface
3. Enter the touch confirmation interface, click the monitor screen, and the computer will confirm that the monitor is a touchscreen.
Figure 2-7 Touchscreen confirmation
4. If your computer is using Windows XP or Windows 7, then you need to download our upgrade tool application on your computer to upgrade the firmware (MOUSE.rar).
After decompressing the MOUSE.rar file, click the exe. software, the software will automatically detect the upgrade file, and then click RUN to complete the upgrade.
Because Windows XP or Windows 7 computer only support single touch, you need to upgrade firmware that supports single touch.
You can download the file in the link: http://u.pc.cd/t1s
Demo video: http://u.pc.cd/RIIrtalK
2.5. Duplicate & Extend Mode Setting for Windows
1. Right click on an empty area of the desktop.
2. Choose Display Settings.
Figure 2-8 Windows Settings
3. Scroll Down to the Multiple displays area and select Duplicate these displays or Extend these displays.
Figure 2-9 Windows Settings
Demo video: http://u.pc.cd/fQ8otalK
3.0. Parameter Settings
- Press the Menu/Confirm button to activate the OSD menu.
- Press the +/Up button and -/Down button to choose your settings.
- Press the Menu/Confirm Button to confirm.
- Press the +/Up button and -/Down button to adjust the value.
- Press Return/Quit button to return to the previous page and quit the menu interface.
Figure 3 – 1 OSD Menu
3.1. Picture Settings
Press the Menu/Confirm button in the main interface to enter the picture menu.
Auto Color Management: There are a total of 5 color modes. (User, ECO, Standard, Graphic, and Movie)
Figure 3 – 2 Color Mode
Brightness : The adjusting range is from 0 to 100.
Contrast : The adjusting range is from 0 to 100.
Colour Temp : Three color temperatures can be adjusted.
(Warm, Cold, and User)
3.2. OSD Settings
Press the -/Down button and Menu/Confirm button in the menu interface to enter the OSD menu.
H.Position : Adjust the horizontal movement of the menu interface. The adjusting range is from 0 to 100.
V.Position : Adjust the vertical movement of the menu interface. The adjusting range is from 0 to 100.
OSD Timeout : Adjust the time when the menu interface automatically exit without any operation. The adjusting range is from 10s to 120s.
Figure 3 – 3 OSD Settings
3.3. Language Settings
Language : Contains 11 languages(English, Portuguese, Polish, Turkish, Hollands, Japanese, Simplified Chinese, Italian, Spanish, French, German)
Reset : After pressing the Menu/Confirm button, all settings on the menu interface will be restored to default settings.
Figure 3 – 4 Language Settings
3.4. Information
Figure 3-5 Information Interface
4.0. Specifications
| Panel size | IPS001 Touch Display |
| Standard Resolution | 1280*1024 |
| Brightness | 400 nits |
| Response time | 5ms |
| View angle | Horizontal : 160° Vertical : 150° |
| Contrast ratio | 500:1 |
| Video input format | (analog) RGB |
| Connector | VGA/HDMI for video signal USB for touch signal |
| Frequency | 30~80KHz/50-60Hz |
| Power supply | External Power Supply:100 to 240V (DC 12V) |
| Touch model | 10 points capacitive touch screen |
| Duration | 50000hours |
| Touch validity | >1,000,000 |
| Net weight | 6.0 Kg/pc, including a stable metal base |
| Gross weight | 6.5 Kg/pc, including a stable metal base |
| Power consumption | Max 30W |
| Wall-mounting setup support | Support wall brackets for wall-mounting, VESA 75mm&100mm |
| Material | Aluminum alloy |
| Certificate | CE, ROHS, FCC |
| Warranty | 2 years |
Table 4-1
5.0. FAQ
1. Please do not touch the connected VGA cable to avoid monitor flickering.
2. We recommend that you use a VGA cable to connect and transmit video signals. The VGA cable has two locking screws, so there will be no problem of poor contact.
Figure 5-1 VGA Cable
1. First check whether the indicator light on the power adapter shows a blue light, and confirm that the power supply has been connected to the monitor. Click the power button closest to the bottom, and the power indicator light will change from red to green.
Figure 5-2 Check the Indicator
2. Check if the VGA/HDMI cable is properly connected to the monitor and your device.
3. If any abnormal phenomenon is found in the above two steps, please contact us to deal with it.
1. Check if the USB cable is properly connected to the monitor and your device.
2. If your device is a Windows computer, you can click on the control panel on the computer—tablet PC settings—setting—- then click on the monitor screen to let the computer recognize the display as a touchscreen. For the specific setting method, please refer to Section 2.4
Just keep the screen of the device connected to the monitor always on, and the monitor’s screen will always be on.
Scan the QR code for Facebook online chat and WhatsApp communication.
MUNBYN provides 18 months warranty and lifetime free service. If you encounter any issues with the product, please contact the MUNBYN team to promptly receive troubleshooting tips or a replacement.
support@munbyn.com(24-7 online support)
www.munbyn.com (how-to videos, warranty details)
+86 18144898200
+1 403 477 1911
IPTS001
MORE CHOICE FOR YOUR
GROWING BUSINESS
Documents / Resources
 |
MUNBYN IPTS001 POS Touch Screen Monitor [pdf] User Guide IPTS001 POS Touch Screen Monitor, IPTS001, POS Touch Screen Monitor, Touch Screen Monitor, Screen Monitor, Monitor |
