5470 Mobile Autonomous Robotic Cart
“
Specifications:
- MARC 5 Series Quick Start Guide
- Contents:
- MARC cart
- Lithium-ion battery pack and keys (packed separately)
- Battery charger
- USB-C to LAN cable kit
- Printed User’s Guide and Quick Start Guide
- Emergency stop button for safety
- Active Mapping Mode for programming
- Fixed Map mode for enhanced performance
- Revision 250422B
Product Usage Instructions:
1. Battery Installation:
Verify the emergency stop button is not activated. Insert the
battery by sliding it onto the rails and pushing until fully
seated. Insert the key into the battery and turn it to the On
position.
2. Establish Home Location:
Position the cart in a known location and orientation, creating
a ‘parking spot’ for successful recalibration functionality.
3. Programming Locations:
Press and hold any un-programmed station button for 3 seconds
until you hear a double-beep sound. Move the cart to the desired
location and repeat the process to program multiple stations.
4. Saving Map and Programming:
All programming is done in Active Mapping Mode and erased when
powered down. Switch to Fixed Map mode by pressing the Map button
for 3 seconds to keep programming intact during battery changes and
reboots.
FAQ:
Q: How do I access product documentation?
A: Please read the included User’s Guide for important
instructions and intended use information. You can also use the QR
code provided to access product documentation.
“`
MARC 5 Series Quick Start Guide
Contents: – MARC cart – Lithium-ion battery pack and keys (packed separate) – Battery charger – USB-C to LAN cable kit – Printed User’s Guide and Quick Start Guide (this placard)
Verify emergency stop button is not activated (pressed in). Rotate the button clockwise to reset.
Insert battery by sliding onto rails and pushing until fully seated. Insert key into battery and turn to “On” position.
Check emergency stop button!
Establish a home location by positioning the cart in a known location and orientation. Once cart is in
this location, press the Power button on the handle above the EZ-Go Navigation panel. LEDs will be yellow while booting wait up to 1 minute for unit to complete booting until “Cart ready” is heard and status LEDs on the cart legs begin pulsing green.
TIP: For best results we suggest that you create a `parking spot’ for your robot. This will allow for successful recalibration functionality. Remember to have the cart parked and properly oriented when it is initially booted calibration location.
Program your first locations.
Press and hold any un-programmed station button (grey) for 3 seconds until you hear the double-beep sound. Station button (in this example, 1) will turn green, indicating programming completed.
2 feet or more
TIP: For best results, program destinations more than 2 feet from any stationary objects.
Manually move the cart by pushing using the handle to the next location you wish to program. Press and hold any un-programmed station button (in this example 3) for 3 seconds until you hear the double-beep confirmation sound.
TIP: If you see the second screen, press the battery level button to return to the first screen with station buttons 1-10.
Saved your map to keep your programming.
All programming is done in Active Mapping Mode (no saved map). All programming is erased when cart is powered down. To keep all programming intact, move to Fixed Map mode by pressing the Map button for 3 seconds till you hear the double-beep confirmation sound. Now, programming will remain during battery changes and reboots, great for use day after day for the same tasks.
TIP: Performance is enhanced in Fixed Map mode. Save the map by pressing the map button till you hear the doublebeep confirmation. The map button will turn green.
Please read the included User’s Guide for important instructions and intended use information to use your product safely! Use QR code to access product documentation.
Revision 250422B
Documents / Resources
 |
MUL TECHNOLOGIES 5470 Mobile Autonomous Robotic Cart [pdf] User Guide 5470, 5475, 5470 Mobile Autonomous Robotic Cart, 5470, Mobile Autonomous Robotic Cart, Autonomous Robotic Cart, Robotic Cart |