MTI BASICS MBISC 6030D Bathtubs

MBISC6030D
59.5” x 30” x 16”

• Installation: Alcove
• Material: Acrylic
• Plumbed Weight: 105 lbs / 48 kg
• Soaker Weight: 85 lbs / 39 kg
• Average Fill: 32 gal to above jet level
• Maximum Fill: 39 gal to overflow

  

  Package                                 Package Content                                         Part #
  Soaker	Soaking bath – No jets. Integral front skirt, 3-sided integral tile flange and textured bottom.	MBSISC6030D
  Whirlpool	6 point-massage jets, 1-bhp pump, integral front skirt, 3-sided integral tile flange and textured bottom.	MBWISC6030D

  

Important Ordering and Installation Information

• Before ordering or installing, consider access to equipment.
• Front skirt is not removable.
• Must specify left- or right-hand drain when ordering.
• Use proper bedding compound to fully level and support the tub.
• Tubs equipped with an air system or factory installed pre-leveled foam base are designed to install directly onto a flat level subfloor.
• Location of all therapy components is predetermined and cannot be changed. ˚ Suction and control locations may vary.
• Options listed cannot be combined with Designer Collection options.
  • Before discarding tub crate, check for accessories that may be packaged inside.
  • All product measurements are +1/2”.
  • Specifications and configurations are subject to change without notice.
  • Measurements herein supersede all others published prior to publication date below.

Options Must be ordered at time of purchase.

• Standard White (no charge)
• Color Upgrade: Biscuit (MTISCOLOR)
• Quick Ship / Priority
  Soaker & Whirlpool (QSHIPMTIS) Airbath (QSHIPMTISA)
• Inline Heater
  For Whirlpool (HTRMTIS) uses existing pump For Soaker & Air Bath (MBHTI SOAK) heater with recirculating pump

Accessories

• Lift and Turn Drain & Overflow
  Chrome (MBWOC), White (MBWOW), Brushed Nickel (MBWOBN)
• Pillows
  Soft Pillow White (MBPSW) Black (MBPSB) Roll-Up Pilow Light Aqua (MBPRUC) Black (MBRUB)

CSA Certified C/US; ANSI Z124.1 and ANSI 112.19.7

NOTE: Filling this tub to the maximum may require an above average size or dedicated water heater.

Documents / Resources

MTI BASICS MBISC 6030D Bathtubs [pdf] User Manual MBISC 6030D, Bathtubs, MBISC 6030D Bathtubs

References

• User Manual