C-2370R Bluetooth Headset
“
Product Information
Specifications:
- Model: C-2370R
- Bluetooth Version: 4.0
- Operating Range: Up to 33 feet (10 meters)
- Battery Life: Up to 8 hours of talk time
- Charging Time: Approximately 2 hours
- Compatibility: Works with most Bluetooth-enabled devices
Product Usage Instructions
Power On / Shutdown:
To power on the headset, long press the O button for about 2
seconds until the indicator lights flash blue and red alternately.
To shutdown, long press the Q button for about 3 seconds until the
indicator light turns off.
Pairing:
1. Power on the headset to enter Bluetooth mode.
2. The headset will automatically enter pairing mode after
booting, indicated by flashing blue and red lights.
3. Once pairing is successful, you will hear a “Ding Dong” sound
and the blue light will stay on.
Reconnection:
If disconnected from the phone, the headset will automatically
reconnect to the previously paired device once powered on,
indicated by a “Ding Dong” sound and the blue light staying on.
Long Distance Disconnection:
If disconnected due to long distance, the headset will indicate
this with a specific sound. Reconnect when back within range.
FAQ (Frequently Asked Questions)
Q: How do I charge the Bluetooth headset?
A: Use the provided charging cable to connect the headset to a
power source. Charging time is approximately 2 hours.
Q: Can I pair the headset with multiple devices
simultaneously?
A: The headset can typically only be connected to one device at
a time. To switch devices, disconnect from the current device and
pair with a new one.
“`
Bluetooth Headset General Instructions C-2370R
Function Headphone status
operate
rompt sound Indicator Lights
1 Power on
Shutdown
Long press O about 2S
Flashing blue and Bluetooth Mode red alternately
2 Shutdown
Power on
Long press Qabout 3S
Shutdown Indicator light off
3 Enter pairin1 Shutdown
AuLomaLically enter the search state after booting
Bluetooth ModE
clashrn, rnd d tJlue al -_,,rmnP Iv
4
Pairing successful
pair
I
“Ding Dong”
Blue light is always on
5 Disconnected from the phone
connect
I
“Dong” blhYfeti
6 :’.”s::ting
Shutdown
Automatically reconnect to previously paired devices after nowerino1 on
“Ding Dong”
Blue light is always on
7 Disconnect from Long distance
a long distance disconnection
“‘ When the “”””‘””‘” is out of the urn,.,Hu11 range
of the
l::::J::;;:,”
lcoooec<ioo
..:;; “Ding Dong’
lautornatica.1 reconnect.
lt1utomaUc11lly shut down aftc.r 1 minute.
Blue light is
always on
8
Volume Adjustment
Play Music
long press +!··· 1″11″1/-
,M,,w,/e,o,_ ‘bee,’
I
9 Previous song Music playing
Short press l<1″4/-
I
I
10 Next song Music playing
Short press +;,.,.1
I
I
11 !/Play Music playing
Short press (‘.)/11,,11
I
I
12 fggriiaer
Call
I
Ring, ring..
I
13 iiering a
Call
Short press.,
I
I
14 Reject call
Call
Long press.
I
I
15 nion
Call
16
Hang up the ohone
Call
double click..
Short press .
I
I
I
I
Evcry20suconds,
17 Low battery
In power on state
Battery voltage is as low as 3. 3V
it will you to
‘
he battery
I
if it is low.
18
Low power shutaown
19 Charging indicator light
In power on state
Charge
Battery voltage is as low as about 3. OV Aths/e light is charging,
Shutdown
I
I
Red light is on
20 LINE
In any state
Insert the audio cable and switch directly to
rn
The headsetisnow a nonnal
Md
are invalid.
Shutdown
Indicator light off
21 Fully
charged
22 FM Mode
23 TF card mode
24
Turn lights on/off
Charge
Battery fully charged
Blue light on
In power on state
TF card mode
In power on state
Short press the “M” key to enter F’l mode Short press the “M” key to exit F’l mode
TF card is inserted later first, when there is a TF card, read TF card first when booting
FM Mode lrF card mode
1.Long press for lS” :;.” Note: l’ress the
2.Long press for lS”M”
sococdio,
I
3.Long press for lS”..fa-11 “!r1P1
I
I
Light off or on key
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Documents / Resources
 |
Morui C-2370R Bluetooth Headset [pdf] Instruction Manual C2370R, 2BOJ8-C2370R, 2BOJ8C2370R, C-2370R Bluetooth Headset, C-2370R, Bluetooth Headset, Headset |