OFII SK623AG Wireless Keyboard and Mouse Set
Product Information
Specifications:
- Compliance: Part 15 of the FCC Rules
- Conditions: Must not cause harmful interference, must accept
any received interference
Product Usage Instructions
Installation
Ensure the device is placed in a location with proper ventilation and away from sources of interference.
Powering On
Connect the device to a power source using the provided power cable. Press the power button to turn it on.
Setting Up
Follow the on-screen instructions to set up the device for first-time use. This may include connecting to a network and adjusting settings.
Operation
Use the device as intended, keeping in mind the compliance conditions mentioned in the user manual.
Frequently Asked Questions
Q: What should I do if the device causes interference?
A: Try repositioning the device to minimize interference with other electronics or devices.
Q: How can I troubleshoot undesired operation of the device?
A: Check for any nearby sources of interference and ensure proper installation and setup according to the user manual.
Product Description
Product installation instructions
- Remove the USB receiver from the bottom of the mouse and plug it into the USB port of the computer.
- Open the battery cover at the bottom of the mouse, put an AA (No. 5) battery into the battery compartment (note that the positive and negative polarity of the battery must be correct) the LED light at the bottom of the mouse will be lit once and then extinguished, and cover the battery.
- Open the battery cover at the bottom of the keyboard, put an AA (No. 5) battery into the battery compartment (note that the positive and negative polarity of the battery must be correct), and close the battery cover.
- When you go out to carry and not use, you can also put the USB receiver into the bottom of the mouse Inside the receiver slot.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
FCC Manual
Information to User
Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio trequency energy and, it not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more ofthe following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
Documents / Resources
 |
MOFII SK623AG Wireless Keyboard and Mouse Set [pdf] Instruction Manual WOX-SK623AG, WOXSK623AG, SK623AG Wireless Keyboard and Mouse Set, SK623AG, Wireless Keyboard and Mouse Set, Keyboard and Mouse Set, Set, Keyboard, Mouse |