Mircom MIX-5251AP/RAP/HAP Advanced Protocol Intelligent Thermal Sensors
Description
Mircom’s low profile intelligent plug-in thernal detectors with integral communications provide features that surpass conventional detectors. Point ID capability allows each detector’s address to be set with decade address switches, providing exact detector locations. These intelligent sensors utilize a state-of-the-art thermistor sensing circuit for fast response and are designed to provide open area protection with 50 foot spacing capability.
Mircom’s Advanced Protocol (AP) devices use a high speed communication protocol that greatly increases the speed of communication between the intelligent devices. Mircom’s Advanced Protocol uses a superior group polling method as well as an interrupt feature that provide for a faster response to an alarm condition. In addition, the Advanced Protocol allows for greater system capacity with support for up to 318 devices per SLC circuit. The AP devices are backwards compatible to operate in CLIP mode for legacy system applications.
MIX-5251AP Intelligent Heat Detector, 135°F Fixed Temperature
The MIX-5251AP uses an innovative thermistor sensing circuit to produce 135°F fixed temperature detection in a low profile package. This thermal detector provides cost effective, intelligent property protection in a variety of applications.
Features
- Sleek, low profile design
- Available as 135°F fixed temperature, 135°F fixed temperature with rate-of-rise detection and high temperature 190°F fixed temperature
- Dual LEDs indicate communications and activate steady when in alarm
- Low profile base provides easy interchangeability
- Low standby current
- Rotary switches for direct-dial entry of address. Each unit can have address set for 01-159 for Advanced Protocol mode and 01-99 for CLIP mode
- Superior EMI protection
MIX-5251RAP Intelligent Heat Detector, 135°F fixed temperature with Rate-of-Rise Detection
The MIX-5251RAP provides both 135°F fixed and rate-of-rise thermal detection. This thermal detector provides cost effective, intelligent property protection in a variety of applications.
MIX-5251HAP Intelligent High Temperature Heat Detector, 190°F Fixed Temperature
The MIX-5251HAP provides 190°F (88°C) fixed temperature detection for high temperature applications.
Specifications
| Voltage Range |
| 15 – 32 volts DC peak |
| Standby Current |
| 300 uA @ 24 VDC (one communication every 5 sec. with LED enabled) |
| LED Current (max.) |
| 6.5 mA @ 24 VDC (on) |
| Height |
| 2.0 inches (51 mm) |
| Diameter |
| 6.1 inches (155 mm) installed in B210LP Base 4.1 inches (104 mm) installed in B501 Base |
| Shipping Weight |
| 4.8 oz. (137 g) |
| Operating Humidity Range |
| 10% – 93% noncondensing |
| Thermal Ratings |
| Fixed Temperature Setpoint: 135°F (57°C) Rate of Rise Detection: 15°F/min. (8.3°C/min.) High Temperature: 190°F (88°C) |
| Operating Temperature Range |
| MIX-5251AP/MIX-5251RAP: -4°F to 100°F (-20°C to 38°C) MIX-5251HAP: -4°F to 150°F (-20°C to 66°C) |
Ordering Information
| Model | Description |
| Intelligent Heat Sensors | |
| MIX-5251AP | Intelligent Heat Detector, 135°F Fixed Temperature |
| MIX-5251RAP | Intelligent Heat Detector, 135°F Fixed Temperature with Rate-of-Rise Detection |
| MIX-5251HAP | Intelligent High Temperature Heat Detector, 190°F Fixed Temperature |
| Bases | |
| B501 | Intelligent Flangeless Mounting Base |
| B210LP | Intelligent Flanged Mounting Base |
| B224RB | Intelligent Relay Base |
| B224BI | Intelligent Isolator Base |
| B200SR | Intelligent Standard Sounder Base (Compatible wih B501BH Series) |
| Accessories | |
| RA-100Z | Remote LED Annunciator |
Add suffix “A” for ULC listed model.
Canada
25 Interchange Way Vaughan, Ontario L4K 5W3
Telephone: 905-660-4655 Fax: 905-660-4113
www.mircom.com
U.S.A.
4575 Witmer Industrial Estates Niagara Falls, NY 14305
Toll Free: 888-660-4655 Fax Toll Free: 888-660-4113
THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND NOT INTENDED TO DESCRIBE THE PRODUCTS TECHNICALLY.
For complete and accurate technical information relating to performance, installation, testing and certification, refer to technical literature. This document contains intellectual property of Mircom. The information is subject to change by Mircom without notice. Mircom does not represent or warrant correctness or completeness.
Documents / Resources
 |
Mircom MIX-5251AP/RAP/HAP Advanced Protocol Intelligent Thermal Sensors [pdf] Owner's Manual MIX-5251AP RAP HAP Advanced Protocol Intelligent Thermal Sensors, MIX-5251AP RAP HAP, Advanced Protocol Intelligent Thermal Sensors, Intelligent Thermal Sensors, Thermal Sensors |
