Midea MJ-BL3508W2 Table Blender User Manual

Warning notices: Before using this product, please read this manual carefully and keep it for future reference. The design and speciﬁcations are subject to change without prior notice for product improvement. Consult with your dealer or manufacturer for details.
The diagram above is just for reference. Please take the appearance of the actual product as the standard.

THANK YOU LETTER
Thank you for choosing Midea! Before using your new Midea product, please read this manual thoroughly to ensure that you know how to operate the features and functions that your new appliance offers in a safe way.

SAFETY INSTRUCTIONS

Intended Use

The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. Please check the packaging and appliance on arrival to make sure everything is intact to ensure safe operation. If you find any damage, please contact the retailer or dealer. Please note modifications or alterations to the appliance are not allowed for your safety concern. Unintended use may cause hazards and loss of warranty claims.

Explanation of Symbols

Read these operating instructions carefully and attentively before using/commissioning the unit and keep them in the immediate vicinity of the installation site or unit for later use!

IMPORTANT SAFETY INSTRUCTIONS

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Care shall be taken when handling the sharp cutting blades, emptying the bowl, and during cleaning. Always disconnect the blender from the supply if it is left unattended and before assembling, disassembling or cleaning.

Switch off the appliance and disconnect from the supply before changing accessories or approaching parts that move in use.
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.

Children shall not play with the appliance.
This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.

Do not use outdoors.
This appliance is intended to be used in household and similar applications such as:
- staff kitchen areas in shops, offices and other working environments;
- farm houses;
- by clients in hotels, motels and other residential-type environments;
- bed and breakfast type environments.

WARNING: Misuse may cause potential injury.

Circuit Principle Diagram

PRODUCT OVERVIEW

Part Name

Accessories (optional)

NOTE
All the pictures in this manual are for explanatory purposes only. Any discrepancy between the real object and the illustration in the drawing shall be subject to the real subject.

OPERATION INSTRUCTIONS

Before First Use

Before using your blender for the first time, remove any packaging material and promotional labels.
Be careful when handling the blades as they are extremely sharp.
Wash the jug, lids, blade assembly and attachments in warm soapy water with a soft cloth. Rinse and dry thoroughly. All parts (except motor base) may be washed in the dishwasher, on the top shelf.

Overload Protection System

The working time of the grinding cup should not be more than 30 seconds and the max capacity shall not exceed 50g, the continuous working interval must be 5 minutes and no more than 3 times, and the working time of the mixing cup should not exceed
2 minutes. After the shutdown, it is necessary to let it fully heat, cooling to room temperature.
The MAX line is usually a good indicator to prevent overly heavy loading, however some especially dense combinations of ingredients may still strain the motor. If the motor seems to be straining or running slowly, only operate for 10 seconds at a time, or reduce the amount of ingredients used. Adding more liquid can also help to loosen dense mixtures.

NOTE

Do not process hot foods or liquids in blender.
Do not store food or liquids in the blender jar.
Avoid bumping or dropping the blender.

Table Blender

Grinder (Optional)

Recipes

Blending programs
The blending times in the chart below are not approximate and should be adjusted to suit your own tastes, different food quantities and food manufacturer’s instructions.

CAUTION

Hot liquids can erupt during blending. Do not blend hot liquids.
This product is not suitable for mixing dry food. Never run the appliance empty.
TIP

In the process of operation, press the “OFF” key to complete the program in advance
Press the “OFF” key to stop any program and shut down the device during operation

CLEANING AND MAINTENANCE

Cleaning

WARNING
Caution hazard: Blades in jar are very sharp. Use caution when cleaning.
Unplug the power cord from the power outlet after use for safety reasons.

Jug, blades and lids
Avoid allowing food residue to dry on. Follow these steps as soon as possible after use:

Rinse most of the residue off the jug, blades and lids.
Hand wash in warm, soapy water using a mild liquid detergent and a non-abrasive sponge.

Motor base
To clean the motor base, wipe with a soft, damp cloth then dry thoroughly. Wipe any excess food particles from the power cord.

Cleaning agents
Do not use abrasive scouring pads or cleaners on either the motor base or any part of the blender, as they may scratch the surface. Use only warm soapy water with a soft cloth.

Dishwasher
The jug, lids and blade assembly may be washed in the dishwasher on the top shelf only.

Stubborn food stains and odours
Strong smelling foods such cumin and coriander, and some vegetables such as carrots may leave an odour or stain.
To remove, pour warm soapy water and fill to the MAX mark. Set aside to soak for 5 minutes. Then wash with a mild detergent and warm water, rinse well and dry thoroughly. Store blending bottle and jug with lids off.

Maintaining

Store your blender upright with the blender jug assembled on the motor base, or beside it. Do not place anything on top. To allow air to circulate, keep the lid off.

TROUBLESHOOTING

Operation of your appliance can lead to errors and malfunctions. The following tables contain possible causes and notes for resolving an error message or malfunction. It is recommended to read the tables carefully below in order to save your time and money that may cost for calling to the service center.

Abnormality Handling

In case of abnormalities such as abnormal noises, smell, smoke, etc., you should immediately cut off power and stop use.
If the product does not work, please check whether the power is on, whether the “MIX or BLEND or GRIND” key is pressed, and whether the accessories are installed in place.

If the product still cannot work after checks mentioned above, please consult the designated repair centre for maintenance.

Fault Analysis and Elimination

TRADEMARKS, COPYRIGHTS AND LEGAL STATEMENT

logo, word marks, trade name, trade dress and all versions there of are valuable assets of Midea Group and/or its affiliates (“Midea”), to which Midea owns trademarks, copyrights and other intellectual property rights, and all goodwill derived from using any part of an Midea trademark. Use of Midea trademark for commercial purposes without the prior written consent of Midea may constitute trademark infringement or unfair competition in violation of relevant laws.
This manual is created by Midea and Midea reserves all copyrights thereof. No entity or individual may use, duplicate, modify, distribute in whole or in part this manual, or bundle or sell with other products without the prior written consent of Midea.
All the described functions and instructions were up to date at the time of printing this manual. However, the actual product may vary due to improved functions and designs.

DATA PROTECTION NOTICE

For the provision of the services agreed with the customer, we agree to comply without restriction with all stipulations of applicable data protection law, in line with agreed countries within which services to the customer will be delivered, as well as, where applicable, the EU General Data Protection Regulation (GDPR).
Generally, our data processing is to fulfil our obligation under contract with you and for product safety reasons, to safeguard your rights in connection with warranty and product registration questions. In some cases, but only if appropriate data protection is ensured, personal data might be transferred to recipients located outside of the European Economic Area.

Further information are provided on request. You can contact our Data Protection Officer via MideaDPO@midea.com. To exercise your rights such as right to object your personal date being processed for direct marketing purposes, please contact us via MideaDPO@midea.com. To find further information, please follow the QR Code.

FAQ

Q: Can I use the blender for hot liquids?
A: It is recommended to allow hot liquids to cool to room temperature before blending to prevent pressure buildup.

Documents / Resources

Midea MJ-BL3508W2 Table Blender [pdf] User Manual
MJ-BL3508W2, MJ-BL3508W2 Table Blender, MJ-BL3508W2, Table Blender, Blender

References

User Manual

Midea MJ-BL3508W2 Table Blender

Specifications